可管理的快速以太网交换机的硬件设计。
这些多端口网桥叫交换式集线器或以太网交换机。
These multiport bridges were called switching hubs or Ethernet switches.
本文介绍了基于以太网交换机平台的SNMP代理的实现。
The text mainly introduces the realization of the SNMP agent on the Ethernet switch.
本文主要探讨在以太网交换机上的一种组播协议：组播侦听协议。
In this paper, the multicast protocol (IGMP Snooping) on Ethernet switch is discussed.
这种方案由社区中心服务器、以太网交换机、以及家庭网关等组成。
This solution is composed of the following components: community service center, Ethernet switches, residential gateways etc.
宽带业务相关模块主要包括以太网交换相关的驱动，协议和管理模块等。
The broadband service modules include the driver, protocol and management modules related to the Ethernet switching.
重点介绍了分布式以太网交换机的设备管理、转发流程、转发控制流程。
It emphatically introduces distributed switcher's device management, forwarding flow and forward-controlling flow.
由于以太网交换的广泛应用和高性价比，它是实现这种融合最普及的解决方案。
Ethernet switching is the most pervasive solution to achieve this convergence due to its wide use and cost-effectiveness.
如果您选择的是后者，那么您还必须将本地工作站连接到那个外部的以太网交换机。
If you opt for the latter, you will also have to connect your local workstation to the external Ethernet switch.
公司作为西门子工业以太网交换机在西北市场的唯一代理商，也面临同样的问题。
M corporation, also facing the same problem, as the unique agent of Siemens Industrial Ethernet switches in Northwest market.
业务网络层：业务网络采用成熟的以太网交换机冗余技术，比如堆叠或者主备模式。
Service network layer: the service network USES the mature Ethernet switch redundancy technology, such as the stack or main standby mode.
以太网是当前园区网所使用的主要网络技术，利用以太网交换机划分网段并实现网内互联。
Now Ethernet is the main network technology used in Intranet, Ethernet switch is used to partition network segment and to make interconnection in network.
之所以描述这两个示例交换机，是因为它们提供了100%无阻塞以及高性能千兆以太网交换。
The two example switches are described because they are working, 100-percent non-blocking, and high-performance Gigabit Ethernet switches.
身份验证服务器可以驻留在专用的电脑，一个以太网交换机，一个接入点或网络访问服务器。
An authentication server can reside in a dedicated computer, an Ethernet switch, an access point or a network access server.
部署10千兆以太网交换机，支持基于优先级的流量控制和类似于典型交换机部署的无损耗以太网。
Deploy the 10 gigabit Ethernet switch that supports priority-based flow control and loss-less Ethernet similar to a typical switch deployment.
随着以太网技术的飞速发展和通信量的剧增，以太网交换机在以太网设备中扮演了越来越重要的角色。
With the development of the Ethernet technology and the increase of the throughput, the Ethernet switches have played more and more important role.
如何在大业务量的网络环境下确保各设备之间协议包的正常交互，是以太网交换机设计面临的重要问题。
For design of an Ethernet switch, it is important to ensure normal interaction of protocol packets between different devices under a network environment of massive traffic.
本文就以社区宽带综合业务网络系统为背景，阐述了一款高速以太网交换机——SW224的硬件设计实现。
In this paper, we will introduce the design of one high speed Ethernet switch, SW224, with the background of Community Broadband Network System with Integrated Services.
分析了采用输入、输出虚队列的输入缓存式以太网交换机的运行机制，并用计算机仿真的方法对其进行模拟、评价。
The structure and the operation mechanism for the input-buffered Ethernet switch with input and output virtual queues is analyzed. The model is simulated and evaluated by computer simulation.
文章从体系结构的选择、交换机的组成框架、驱动程序的设计等方面论述和分析了快速以太网交换机硬件的总体设计。
This paper discusses and analyses the general design of the Fast Ethernet Switch from the aspects of the selection of the architecture, components and hardware drivers.
最后以亿恒公司的芯片解决方案为例，为采用VDSL和以太网交换的宽带接入系统给出了一种功能完整的实现方法。
Then a broadband access solution with complete functions based on chipset (10bases, AR2224) from Infineon Technology is given as an application example.
使用以太网交换机，不会将数据包发送到所有端口，但是许多最新的交换机都提供了一个管理端口，该端口会将信息发送到所有的端口。
With Ethernet switches, packets are not echoed to all ports, but many modern switches provide a management port where the information is echoed.
每个分区可以有最多65,534个虚拟以太网适配器连接到虚拟交换机上。
Each partition can have up to 65,534 virtual Ethernet adapters connected to the virtual switch.
和集线器一样，网络交换机的以太网实现是最常见的。
As with hubs, Ethernet implementations of network switches are the most common.
一个ARP请求被发送到所有虚拟以太网，从而更新网络上所有外部交换机和系统上的ARP缓存。
A gratuitous ARP request is sent on all virtual Ethernet adapters to update the ARP caches on all external switches and systems on the network.
通过制定侦测以太网中路由循环、清除死循环连接的网络传输协议，交换机的死循环问题总算是解决了。
This problem was solved (for switches) by creating a protocol that detects loops in an Ethernet network and prunes connections until the loops are gone.
网络交换机负责将以太网数据帧写入特定的LAN网段。
A network switch is responsible for writing frames of Ethernet data to a LAN segment.
大多数消费级网络交换机提供4个或8个以太网接口。
Most consumer-grade network switches provide either four or eight connections for Ethernet devices.
大多数消费级网络交换机提供4个或8个以太网接口。
Most consumer-grade network switches provide either four or eight connections for Ethernet devices.
应用推荐