在火炬模式下，显示亮度设置为最高。
降低亮度设置。
进入电脑显示设置，做些必要的调整以配合房间的亮度。
Go to your computer display Settings and make the necessary adjustments to match the brightness of the room.
两款显示器均支持1280x1024的最佳分辨率，响应时间为5ms，对比度为1000：1，亮度打250cd/m2，视频输入接口则只设置哦VGA接口。
Either has a maximum 1280x1024 resolution with a 5ms pixel response time, 1,000:1 contrast ratios, 250cd/m2 brightness and VGA only for input.
如果显示器没有图像显示，首先确保正确设置亮度和对比度的调节进行正确的设置。
If there is no image on display monitor, first ensure that the adjustment for brightness and contrast are properly set.
如果您的处理器已经控制亮度和对比度设置为默认。
If your processor has brightness and contrast control set them to default.
跟一个包括近程掌握，你能够设置不只色彩腔调，但是也了亮度和速度的变化。
Come with an included remote control that you can set not only the color tone, but also the brightness and the speed of changing.
因为在最后的校正中，对比和亮度会再次被编辑，所以不要把区域设置成100%的黑或白。
Because contrast and intensity are again edited during final adjustments, it is important to not have areas 100% black or white.
要求客户升级BIOS，并且调整BIOS中的屏幕亮度控制设置。在检查BIOS以后问题依然存在。
Requested customer to update BIOS and alter the LCD Brightness control setting in the BIOS. After checking BIOS the problem persisted.
在这些设置，这些工作模式所有测量有关在亮度相同的，测量1090,1078和1055ANSI流明分别。
At these Settings, these operating modes all measured about the same in brightness, measuring 1090, 1078, and 1055 ANSI lumens respectively.
对DVD的测试中，所述无线模块被关闭，并且将显示器设置到最大亮度。
For the DVD test, the wireless modules were switched off and the display was set to maximum brightness.
手动更改的模糊量，饱和度，亮度，对比度，和其他设置内部和外部的集中地区。
Manually change the amount of blur, saturation, brightness, contrast, and other Settings inside and outside the focused areas.
手机应用程序有亮度和对比度设置，它可以提供一些救济。
The phone app has brightness and contrast Settings, which can provide some relief.
特发性血小板减少性紫癜的设计有三个设置的经典的亮度，你在循环在UI，其次是闸门模式。
The ITP design has three settings of ever-increasing brightness which you cycle through on the UI, followed by the strobe mode.
控制摄像机设置，如颜色、亮度和对比度。
Control camera Settings such as color, brightness, and contrast.
灯管的亮度能够通过反馈回路，或者设置误差放大器输入端的参考端直流电平来调整。
The lamp dimming can be done through this feedback loop or, by setting the reference DC level of the input of error amplifier.
如何设置图像亮度回到它原来的亮度？
How to set image brightness to back it's original brightness?
01智能彩灯设备，进行音乐推送，播放，控制彩灯灯光颜色和灯光模式，调节亮度，设置定时关灯等。
JBL-01 Intelligent lights equipment, music push, playback control lights, light color and light mode, adjust brightness, set the timer to turn off the lights etc...
因为亮度被设置为最高的原因，色彩仍是白色，因此我们必须降低亮度以达到你所期望的效果。
Because the luminance is set to Max, the color will still be white, so we'll need to lower the luminance to change the color from bright white to the hue value you picked.
控制每一个应用程序的(背光)亮度：为手机中每一个应用程序设置不同背光亮度。
Brightness Control for each app: Set different backlight brightness for each application in phone.
如果你是一个相机新手，你或许不会太关心设置光圈、快门速度、感光度，或亮度对比。
If you're a camera novice, you probably don't care much about setting aperture, shutter speed, ISO, or white balance.
智能曝光不断检查的环境亮度和调整曝光设置条件的变化，以防止高光溢出，并阻挡阴影。
Intelligent exposure continually checks the ambient light level and adjusts the exposure setting as conditions change to prevent blown highlights and blocked shadows.
完成上面设置以后你就可以通过调节曲线，亮度，对比度或者一个你认为比较好的特效直到你对最后的结果感到满意为止。
Post production - time to fix it up a bit by adjusting levels, brightness, contrast, curves and sharpness and one you have it looking good add some diffuse glow and tweak it till you are satisfied.
不同的是亮度和对比度设置，质量设置不会影响相机的生活观点。
Unlike the brightness and contrast Settings, the quality setting does not affect the live camera view.
函数设置目标的亮度分量为源值的模，并且设置色调和饱和度分量为0。
The VI sets the real component of the destination to the source value. The VI sets the imaginary component of the destination to 0.
为桌面构建目标渲染的方法是根据附近的灯光的亮度和当前的质量设置（ Quality Settings）在运行时确定。
The rendering method is determined at runtime depending on the brightness of nearby lights and current Quality Settings for desktop build target.
为桌面构建目标渲染的方法是根据附近的灯光的亮度和当前的质量设置（ Quality Settings）在运行时确定。
The rendering method is determined at runtime depending on the brightness of nearby lights and current Quality Settings for desktop build target.
应用推荐