建立适合两布一膜的蠕变模型：六元件并联模型和六元件串联模型。
Second, establishing two models which can simulate creep characteristic of composite geomembranes: model of six elements paralleling connection and model of six elements in series.
研究结果：利用不可修复可靠性串联模型与休哈特控制图建立预警控制界限，建立时间序列回归判别模型。
The forewarning control limits and time series regression judgment model are built up based on the reliability series model in a non-repairable system and Shewhart control charts.
由阻力串联模型出发，建立了本研究体系超滤膜通量与供试液浓度、操作压力及操作流速之间的数学关联式。
The resistance -in-serials model are applied to the correlation of flux of ultrafiltration with operation parameters such as operation pressure , feed concentration and operation velocity.
根据试验结果，分别运用轴向扩散模型和多釜全混流反应器串联模型，对反应器沉淀区和循环区的流态进行了分析和判断。
Based on the experimental results, the flow pattern in the settling section and the circulating section of reactor were analyzed by axial dispersion model and tank-in-series model, respectively.
这个模型可以是一张图片，一个情节串联图版，一段视频，甚至是一个雏形，什么形式都可以。
It could be a picture, a storyboard, a video, or an actual prototype, among other things.
偏移电压被直接叠加到信号电压之上，可以被模型化为一个未知的电压源，与已知信号相串联。
The offset voltage adds directly to the signal voltage and can be modeled as an unwanted voltage source in series with the intended signal.
可靠性评估方法是基于应力—强度模型的串联法。
The series method of stress strength model is used to evaluate structural reliability.
然后结合管道理论研究得出了带有弯曲管路、异径串联连接管路的蓄能器数学模型。
Then combined pipe-line theory, the accumulator's integrated mathematical model with incurvate and strange diameter series connection pipeline is built.
随之，建立串联弹簧模型理论用于初步确定隔震垫参数，再使用非线性动力时程分析法进行详细设计。
Then the model of series spring is used to estimate the isolator parameters and the method of nonlinear dynamic history analysis is used for detail design.
此外，还分别建立了串—并联和并—串联两种余度设计系统的最少研制费用模型。
Moreover, the least development cost models for the series-parallel and the parallel-series redundancy design are established.
论文基于模糊集合的交集与并集算子，给出了机械串联系统与并联系统的模糊可靠性数字仿真模型；
In the paper, models for fuzzy reliability digital simulation of mechanical series system and parallel system based on the operators of intersection and parallel set in fuzzy mathematics are given.
讨论了用散射参数表达的串联阻抗Z和并联导纳Y的二端口特性，给出了它们的有源RC电路模型。
The scattering parameter expression of two port properties of impedance Z (in series connection) and admittance Y (in parallel connection) are discussed and their active RC model is presented.
文章介绍了大系统分解协调理论，建立了串联、并联库群水库防洪优化调度模型。
The paper introduces the large system decomposition coordination theory, establishes the reservoir flood control optimization operation model of series and parallel connection reservoirs group.
给出一个具有多控制功能的静止同步串联补偿器(SSSC)电压源模型。
This paper presented a modeling of the static synchronous series compensator (SSSC) with multi-control modes for power flow analysis.
外部钢框架进一步简化为半刚架和相应的弹性阶梯形等效弯曲杆的串联体系，这种简化模型能考虑柱轴向变形对结构动力反应的影响；
The external steel frames are simplified as a series of half frames and the core tube is modeled as a bending and shearing two spring system.
针对光伏电池研究了基于物理机制的数学模型，分析了串联电阻和并联电阻对光伏电池特性的影响。
In this paper, math model is studied based on physics theory of PV cell, and the influence of series resistor Rs and parallel resistor Rsh on PV cell characteristic is analyzed.
提出了两个动态神经网络串联的混合神经网络动态迟滞模型，用以逼近压电陶瓷的迟滞特性。
The hybrid neural network dynamic hysteresis model, which consists of two dynamic neural networks in a cascade form, is proposed to approximate the hysteresis characteristics of piezoceramic actuator.
针对四轮车式移动机器人的运动学模型，首先利用一个正则坐标变换，将误差系统转换为一个非线性串联系统的形式；
Aimed at the kinematic model of the car-like mobile robot with four wheels, the tracking error system is firstly transformed to a nonlinear serial system through a regular transformation.
并且给出了计入串联电阻影响后进行电流电压方程参数提取的方法，以便把共振隧穿二极管直流模型加入电路模拟软件中进行电路设计。
In order to add the DC model of RTD into SPICE circuit simulator and design RTD circuits, parameters of current-voltage equation were extracted after considering the effect of series resistance.
提出了具有可变光衰减的串联量子阱半导体光放大器的数字模型并与实验数据相匹配。
A model for the number of QW SOAs in series with variable optical attenuation is developed and matched to the experimental data.
并利用离散化的方法建立了串联盘式管道连续输送机传动系统在无阻尼情况下的动力学模型。
Besides, the dynamic model in driving system of the conveyer is established with through scattered method on no damping occasion.
针对旋转型耦合器，建立了耦合器等效电路模型，指出耦合器可等效为漏感与励磁电感串联。
The paper set up the equivalent circuit model of the rotary type coupler, and analysed that the coupler can be simplified to a magnetizing inductance and a leakage inductance in series.
针对典型的串联和并联机构，建立了动力学模型。分析了在外力输入时机构的静刚度和动刚度。
Dynamics model of typical serial and parallel mechanisms were presented, which could be used to analyzed the static and dynamic stiffness.
论文针对环己烷液相无催化氧化的五釜串联鼓泡搅拌反应器生产装置(BSTR)，建立了氧化装置的过程数学模型。
A model of five-bubble-stirred-tank reactor (BSTR) for industrial uncatalyzed oxidation process of cyclohexane was established to predict and optimize the the industrial production.
在可控串联电容补偿装置（TCSC）的研究中，用电容、电感、晶闸管、MOV等元件构造TCSC器件模型。
The power electronic model of thyristor controlled series compensation (TCSC) consisting of capacitors, inductors, thyristors, metal oxide varistors (MOV) is led into digital simulation.
讨论了界面吸附、脱附与扩散对传质阻力的不同影响，建立了薄膜传质的串联阻力模型。
The different effects of external sorption, adsorption and diffusion on mass transfer resistance are discussed and the resistance model of membrane mass transfer was built.
为了提高蛋白质二级结构预测精度，本文尝试采用一种基于串联BP网络集成的二级结构预测模型。
To improve the prediction results of protein secondary structure, we developed a neural network ensemble model based on dual-layer feed forward BP network.
研究表明，所建立的钢缆类并串联系统可靠性模型能够为钢缆的可靠性分析提供依据，并且能反映相关失效的影响。
The result shows that the reliability model developed provides a reference to the reliability design of wire cables with dependence failure revealable.
引进类电阻的概念，定义了类电阻的串联和并联，从而给出了电阻、电容和弹性系数的统一的数学模型。
In this paper a concept of resistance-like is introduced, and its series connection and parallel connections are defined.
引进类电阻的概念，定义了类电阻的串联和并联，从而给出了电阻、电容和弹性系数的统一的数学模型。
In this paper a concept of resistance-like is introduced, and its series connection and parallel connections are defined.
应用推荐