本文介绍一种多回路串级控制方法。
如串级控制、前馈控制、大滞后控制等。
Such as cascade control, feedforward control, large time delay control.
抽提回收塔底蒸汽凝液温度流量串级控制。
SED recovery column reboiler temperature flow cascade control for steam condensate return.
其磨矿浓度的控制采用了模型、比例、串级控制。
The control of pulp consistence has used themodel, ratio and cascade control.
基于实际工业过程控制，引入了网络化串级控制系统的概念。
Based on practical industrial process control, the concept of networked cascade control system was introduced.
文章介绍了一种已实际应用的电厂锅炉汽包水位三冲量串级控制方法。
This thesis explains a kind of three-element value cascade control method which is applied in the power plant to control the water level in the steam boiler.
系统保留了传统串级控制系统克服内回路扰动、提高系统工作频率的优点。
The system has retained the advantages of traditional cascade control systems, which consist of overcoming inner-loop disturbances and increasing the working frequency of the system.
串级控制系统采用了两个调节器，因此它的调节器的参数整定更复杂一些。
The cascade control system has used two regulators, therefore it is more complex to set its regulator parameter.
建立了加水前馈-串级控制模型，对加料采用批量控制技术进行实时修正。
The water added feedforward cascade control model was established, and the casing was timely revised with batch control(technology).
本文将串级控制与广义预测控制相结合，应用于工业锅炉液位的控制系统。
The cascade control and generalized predictive control were combined, and used in boiler water height control system.
串级控制系统中，控制回路是通过实时网络闭合的，称为网络化串级控制系统。
Cascade control systems wherein the control loops are closed through a realtime network are called networked cascade control systems.
目前，大多数火电厂的过热汽温控制仍然普遍采用传统的PID串级控制方法。
Currently, the superheated steam temperature control system in most power plants still adopts the conventional PID cascade control scheme.
生产实践表明，这种串级控制系统不仅具有低成本的特点而且具有较好的控制效果。
The production practice shows that the cascade control system has low cost and good control effect.
将动态矩阵控制算法与串级控制相结合，提出了一种新的火电厂锅炉主汽温控制方案。
A new main-steam temperature control scheme of utility boiler is proposed by combining the dynamic matrix control arithmetic with the cascade control structure.
以离子膜电解槽为例，介绍了串级控制系统的形成，分析了串级控制系统的工作过程、结构及特点。
Taking electrobath of hydronium film as an example, this paper introduces the form of cascade control system, and analyzes its working process, structure and characteristics.
论文根据控制目标，在分析系统模型基础上，结合磨矿系统特点，提出了磨矿系统的串级控制结构。
According to the control objective and the characters of the grinding system, a cascade control scheme was given out on the basis of analyzing system model.
结果表明，在同样的运行条件下，SOC -PID控制的性能优于常规pid串级控制的性能。
Results show that, under same operation conditions, performance with SOC-PID control is superior to that of using conventional PID cascade control.
结果表明，所提出的模糊-PID串级控制方案能显著提高磨机给矿量的运行控制效果和适应能力。
The results show that the fuzzy-PID cascade control program can significantly increase control effectiveness and adaptability on the…
通过将动态矩阵比例积分控制算法与串级控制相结合，提出了一种新的火电厂锅炉过热汽温控制方案。
A new superheated steam temperature control system is derived by combining the dynamic matrix proportion integration control arithmetic with the cascade control structure.
针对单回路电液位置伺服系统的动态特性，提出了一种等效流量反馈的控制方法，从而实现了串级控制。
This paper studies the dynamic characteristics of Electro hydraulic Position Servo System, and proposes a method of equivalent flow feedback to realize serial control.
介绍了将DMC - PID串级控制技术应用到无人机无动力飞行时的自动着陆阶段迎角自动控制系统。
DMC-PID bunches control technology in the Angle of attack automatic control system during unpowered flying automatic landing period is introduced.
本文认真分析洗衣粉生产过程的系统特性，给出串级控制的总体控制方案，并对控制算法进行了数字仿真。
The system performance of a detergent manufacturing process is carefully analyzed. An overall scheme of cascade control is given and the control algorithm is simulated.
在氨肥厂生产氨的过程中，引用串级控制方式来对合成塔触媒层的热点温度进行稳定控制，以提高生产质量。
In the process of producing ammonia, we use cascade control method to make the catalyst hotspots temperature stable, so as to increase the quality of production.
该软件能实现单回路控制系统、串级控制系统、比值控制系统的组态、调试和生成，并能进行策略文件的下装。
This software can accomplish the configuration, debugging and building of single-loop control system, series control system, ratio control system, and can upload strategy files to other controllers.
在光电实时跟踪系统中要求响应的时间短、跟踪误差小，采用速度环和位置环的串级控制是一种有效的设计方法。
The series control with the velocity loop and the position loop is an effective design method in the electro-optical tracking system which requires short respond time and little tracking error.
通过仿真及与PID控制的比较表明，采用PF C - PID串级控制策略能够改善交流伺服系统的控制特性。
The simulation results and the comparison with PID cascade control show that the PFC-PID cascade control strategy can improve the controlled performance of AC servo-system.
为了提高交流伺服系统的跟踪性能，将预测函数控制(pfc)和PID控制相结合，提出了一种PF C - PID串级控制策略。
To improve the tracking performance of ac servo-system, PFC-PID cascade control strategy is presented by combining the PFC with PID control.
在对火电厂过热汽温控制对象特点分析基础上，保留串级控制抗内扰的性能，结合模糊控制动态特性好的特点，提出了一种复合模糊串级控制设计。
For the inverted pendulum system with multi-variable and nonlinear characteristic, a double closed-loop cascade fuzzy control approach was put forward based on Takagi-Sugeno fuzzy model.
介绍一种以pic 16f877单片机为核心的智能型位置遥控系统，它能快速可靠地实现对船舶位置的串级控制，主从机串行通信部分采用了RS 42 2标准。
A kind of intelligent position telecontrol systems of the ship based on PIC16F877 is introduced in this paper. RS-422 is adopted in the serial communication.
介绍一种以pic 16f877单片机为核心的智能型位置遥控系统，它能快速可靠地实现对船舶位置的串级控制，主从机串行通信部分采用了RS 42 2标准。
A kind of intelligent position telecontrol systems of the ship based on PIC16F877 is introduced in this paper. RS-422 is adopted in the serial communication.
应用推荐