没有人工控制光照的分布，将会导致农作物生长不均匀，靠近窗户的作物由于受到的日照更多而生长的更快。
Without artificial lighting the result will be an uneven crop, as plants closest to the windows are exposed to more sunlight and grow more quickly.
该模式指出，阜山金矿各构造物理化学参量的分布在矿区内是不均匀的，构造作用是控制成矿流体分布与状态的重要因素。
This model indicates that the distribution of each variation is inhomogeneous in the Fushan gold deposit and the tectonic process is the main controlling factor.
欧佩克控制着全球大约40%的石油供应，各成员国在这笔巨大的“意外之财”中所占的份额并不均匀。
The huge revenue windfall has been unevenly distributed among the members of the cartel, which controls about 40 per cent of the world's oil supplies.
为此，对该路基采用了旋喷注浆和静压注浆加固，使不均匀和开裂得到了有效的控制。
For this, rotary jet grouting and static grouting were adopted for strengthening the roadbed, and the unevenness and cracking have been well controlled.
理论计算和计算机模拟实验结果显示，模糊控制迭代算法的迭代结果其振幅均方误差为0.69%，振幅不均匀度为1.01%。
Computer simulation experiment, as well as theoretical research show that the amplitude mean square error of the iterative output derived from IAFC is 0.69%, and the amplitude un-uniformity is 1.01%.
由于粉末棒密度不均匀，生长过程中又有气泡产生，CO2光源的功率必须严格控制，并随时调整以适应单晶光纤的生长。
The power of CO2 laser is critical due to the non-uniform density and the air bubble in it. It must be strictly controlled.
为解决隧道式淬火炉炉温分布不均匀的问题，采用了高速调温烧嘴脉动燃烧控制技术。
In order to reach uniform temperature distribution in tunnel bogie hearth furnace, the technology of pulse firing control of high velocity burner with air diffusion is proposed.
冷轧带钢的板形平直度自动控制中，轧后带钢的不均匀延伸的在线连续检测是首要问题。
The problem of the first importance in automatically controlling the profile and flatness of cold rolled steel strip is how to measure continuously on the irregularity of elongation in the strip.
观测结果表明：锚杆静压桩能稳定房屋的沉降，控制新的不均匀沉降，加固效果可靠。
The results indicate that static bolt-pressing piles can stabilize the settlement and control additional uneven settlement. The effect of reinforcement was credible.
施工中必须合理选择施工工艺和实行质量控制，以避免断桩或搅拌不均匀。
We must select the rational processing and control the quality so as to prevent the pile being broken or agitation being uneven.
通过工程实例，介绍了采用踏步换土垫层法并结合不同强度的填料用来调整控制地基不均匀沉降量处理地基的方法。
Based on a practical project, the author introduces a ground treatment method of step cushion replacement with different intensity substance to control differential sedimentation.
中厚板控制冷却时钢板的长度方向温度不均，冷却过程加剧了钢板纵向的温度不均匀性。
Uneven temperature already existed in plate lengthwise direction before cooling, and the uneven temperature tendency was aggravated after it cooled.
第三章至第五章论述了通过串口控制红外相机实时完成不均匀性校正的实现方法。
From third to fifth chapter, it discussed the method of nonuniformity adjustment to infrared camera by using serial port.
本文主要对变形裂缝的成因及控制措施作了分析和总结，其中包括混凝土收缩和温度变化引起的裂缝，以及地基不均匀沉降引起的裂缝等。
This paper is an analysis and summary about the causes of distortion cracks, including those caused by contraction of concrete and variation of temperature, and uneven settlement of foundation.
通过引进一个反映金属流速不均衡性的参数———流速均方差，有效地控制型材挤压成形时金属流动的不均匀性。
The non-homogeneous metal flow during the extrusion forming process was well controlled by introducing a non-equilibrium parameter of metal flow, the mean-square deviation of velocity (SDV).
但原始激光束光强的不均匀分布影响了陶瓷改性的一致性，不利于激光烧结工艺的准确控制，严重者还会损坏陶瓷。
However, the intensity of original laser beam spot can not be distributed uniformly, which is bad for controlling the laser sintering condition. And the ceramics may be destroyed.
采用水浴加热替代电阻丝直接加热的方案，解决加热不均匀且不容易控制温度的难题。
By using water bath instead of heated resistance wire directly, could solve the problem that it was uneven and uneasy to control temperature.
考虑到使用中铸铁平板(铸铁平台)的局部磨损及修后平板的不均匀性，局部误差的控制更有必要。
Considering the use of cast iron plate (cast iron platform) local wear and tear of the plate after the inhomogeneity of the local error control, more necessary.
从构造样式、沉积特征、断层组合等方面探讨了黄骅盆地海岸线两侧右旋走滑构造变形的存在，指出结晶基底的不均匀性是NNE向基底隐伏走滑带形成和新生代盖层走滑构造产生的控制因素。
The unevenness of crystalline basement is found to be the governing factor for forming the NNE-striking blind basement strike-slip zone and the strike-slip tectonics in the Cenozoic platform cover.
试验结果表明，控制三通及各上升管的局部阻力系数，可以实现上升管流量不均匀分配。
The test results show that by controlling the T-junction and riser tube's resistance coefficients, the unbalanced riser flow distribution has been achieved.
拉深过程中压边力通过控制系统可以随拉深起皱规律而合理变化，有效地改善法兰区变形的不均匀性，提高盒形件的成形质量。
The BHF can be reasonably changed with the wrinkling law by control system, so the flange formability and the part quality can be imp…
回转炉内的物料温度控制难度很大，从而导致产品质量的严重不均匀，这会造成氧化镁产品的反应活性下降、最终用户的生产成本升高。
It has a single "hard burned" and refractory grade MgO. Material temperature is difficult to control resulting in inconsistencies that reduce reactivity, costing the end user more.
针对目前排种器排种精度不高、稳定性差、排种不均匀及调整范围小的缺点 ，设计了一种光电控制电磁振动排种器。
In this paper the interaction between lighting environment design and people's feeling is discussed by analyzing impacting factors of the illumination, lighting design and glare control.
超塑性胀形控制有各种方法，本文介绍了一种按气压与高度曲线控制的方法，使成形过程更接近于等应变速率胀形，能进一步改善零件厚度的不均匀性。
This paper introduces a method to controll a superplastic bulging by a gas-pressure and a height curve. This method can significantly reduce the thinning rate and unevenness of bulging material.
风机、水泵这类不均匀负荷的电动机使用面非常广，仍然采用挡板、阀门控制流量的方式多消耗大量电能。
The motors with unsymmetrical load such as fans and water pumps are used widely. They will consumes a great deal of power energy, if controlled by accommodating the bafflesand valves.
提出的方法有效地解决了电纺纳米纤维直径不均匀和不可控制的难题。
In conclusion, this method has reliably and effectively solved the instability and uncontrollability of nanoscale fiber manufarturing.
采用水浴加热替代电阻丝直接加热的方案，解决加热不均匀且不容易控制温度的难题。
By using water bath heating instead of resistance wire heating directly, the puzzle of uneven and uneasy temperature controlling was solved.
分析了硬化层分布不均匀的原因，提出满足硬化层均匀分布应优化控制激光参数的方法和条件。
It analyzes the reason that the hardened layer is not well distributed and expresses the terms and approaches of optimizing the laser parameters which satisfy well distribution of hardened layer.
用冶金质量控制的观点，多方面分析奥氏体不锈钢第二相分布不均匀的形成因素。
How to form non-homogeneity on 2-phase distribution in Austenite stainless steel is analyzed in many ways by means of metallurgical quality control.
用冶金质量控制的观点，多方面分析奥氏体不锈钢第二相分布不均匀的形成因素。
How to form non-homogeneity on 2-phase distribution in Austenite stainless steel is analyzed in many ways by means of metallurgical quality control.
应用推荐