提出了摩托车关键零部件的参数化建模方法，并建立了车架的三维参数化模型，为实现摩托车关重零部件数字模型的重用奠定了基础。
Bring forward the method of parameter feature modeling of key parts of motorcycle and established the parameter frame of motorcycle. This work is the basis CAD model reusing.
理论计算结果表明，利用这种参数化建模方法完成的PD C钻头三维布齿模型是精确、可靠的。
The theoretical calculation result indicates that the three-dimensional tooth arrangement model of PDC Bit's with the parameter method is precise and reliable.
在dcl界面利用标准结构的三维实体模型实现图形库的可视化，原型图的参数化引入了特征参数。
In the DCL interface, graph data videotex has been realized by using standard three - dimension object model, stamp parameter has also been introduced.
本文将网络化信息发布技术应用于CAD系统的零件设计，提出了通过网络化参数驱动建立三维模型的新方法。
In this dissertation, networked information releasing technology was applied to part design in CAD system, brought forward a new three dimensional modeling method by networked parameter drive.
阐述Y7125磨齿机基于特征的三维参数化磨削模型和磨齿啮合模型的建立。
The 3D grinding and meshing model of Y7125 gear grinder is established, this is based on feature and parameter.
并结合参数化驱动技术实现网络化三维建模，并基于CATIA平台给出了验证模型。
Then networked three dimensional modeling will be realized by parameter drive , and a proved model based on CATIA was provided .
提出了采用D - H参数表生成机器人三维虚拟模型的方法，实现了机器人的可视化。
The way to generate three-dimensional virtual models of robot manipulators from a D-H parameter table was proposed to realize the visualization of robot.
阐述了气动凿岩机虚拟样机设计的框架结构、工作流程和三维模型构建方法，并在此基础上进行了参数化设计与运动仿真的研究。
The frame construction, the work flow and the three dimensional modelling method of pneumatic rock drill based on virtual prototype technology were elaborated.
通过二次开发AUTOCAD参数化设计马鞍型焊缝曲线工件的三维模型。
The mathematic model of seam is built up based on the re-exploit of AUTOCAD.
在本论文中，运用有限元软件FEPG建立了带长矩形接管受压圆筒体的三维参数化有限元模型。
In this paper, a 3-d parametric finite element model for a pressurized cylinder with a long rectangular tube joint was established using the finite element software FEPG.
如何利用三维参数化人体模型和已有的微型车概念设计结果进行人机工程评价是另一个需要解决的重要问题。
Another key point is how to combine the human body model and car model organically, which is result of concept design, to carry out Man-Machine evaluation.
将亏格为零的三维模型进行球面参数化的方法大致可以分成3类：(1)基于累进网格的方法(2)球面松弛的方法(3)保角参数化方法。
These methods can be divided into three: (1) method based on progressive mesh (2) method based on sphere relaxation (3) conformal method. The three methods have their own advantages and shortcomings.
通过对ANSYS在钢筋混凝土T形梁优化设计中的应用研究，给出了建立钢筋混凝土结构T形梁参数化三维实体模型的方法。
Based on the application study of ANSYS in the optimization design of RC structure t beam, the building method of 3d parametric entity model to RC structure t beam is given.
运用弯道水流概化模型试验，利用先进的ADV进行了三维流速数据的采集，从中提取了纵向流速参数。
A generalized curved conduit flow experiment was employed to obtain the longitudinal velocity parameters by adopting the ADV to measure the 3d flow velocity data.
针对三维模型数据缺乏自然的频域分解算法，鲍虎军等人建立的三维模型平面参数化方法是将三维模型数据转化成二维数据进行处理，但是算法很复杂。
To overcome the difficult of 3D model's decomposing planar parameterization algorithm is proposed by Bao Hunjun, 3D data will be transformed to 2D data in this algorithm.
建立了参数化的三维模型，并用反转法绘制了摆动输出凸轮的轮廓曲线。
The parametrical 3-D model is built and the output cam profile is drawn.
我们帮您人工翻译，但要付费，有意加我扣扣。利用有限元软件ANSYS的命令流和参数化设计语言（APDL）建立渐开线标准斜齿圆柱齿轮啮合对的三维模型。
Using finite element software ANSYS command flow and parametric design language (APDL) to establish standard involute cylindrical bevel wheel of 3d model of meshing.
我们帮您人工翻译，但要付费，有意加我扣扣。利用有限元软件ANSYS的命令流和参数化设计语言（APDL）建立渐开线标准斜齿圆柱齿轮啮合对的三维模型。
Using finite element software ANSYS command flow and parametric design language (APDL) to establish standard involute cylindrical bevel wheel of 3d model of meshing.
应用推荐