经三乙胺中和后得到稳定的自乳化体系。
Stable self emulsified system was obtained after neutralization by triethyl amine.
经三乙胺中和后可以得到稳定的自乳化体系。
A stable self emulsified system was obtained after neutralization of triethyl amine.
三乙胺法冷芯工艺是其中富有成效的工艺方法之一。
The Triethyl Amine Cold Core Process is one of the fruitful technique means among them.
在三乙胺浓度很低时，实验观察到明显的雪崩横向扩展现象。
At very low concentration in experiment, the phenomena of avalanche transverse expansion was observed obviously.
介绍了烷基酯法草甘膦生产中催化剂三乙胺回收的连续化工艺。
A technique for continuous recovery and recycling of triethyl amine catalyst during production of glyphosate from dimethyl phosphite is discussed.
选用三乙胺作为中和剂时，中和度为90%，树脂的水分散效果最佳；
Using triethylamine as the neutralizer, the neutralization degree of 90%, Water dispersion of the resin is the best;
利用三乙胺盐酸盐与酚醛环氧树脂进行开环反应合成了酚醛环氧树脂季铵盐。
The new polymer quaternary ammonium salt was synthesized from epoxy phenolic resin via ring-opening reaction with aqueous solution of triethylamine hydrochloride.
通过不溶的三乙胺盐的形成，用纤维素的邻苯二甲酸半酯可以观察到此现象。
This was observed with the phthalic half-ester of cellulose due to formation of an insoluble triethylamine salt.
对丙酮、四氢呋喃、三乙胺、水混合物的分离进行了工艺流程设计和实验研究。
The process flow was designed and experimentally studied for separation of acetone, tetrahydrofuran (THF), triethylamine and water mixture.
利用溶胶凝胶法添加适量三乙醇胺和三乙胺制备出锐钛矿纳米二氧化钛催化剂。
TiO_2 nanoparticles in anatase form were prepared by a sol-gel method with adding triethylamine and Triethanolamine.
UNI QUAC缔合溶液模型成功地描述了乙酸、苯和三乙胺的液液二相平衡。
The UNIQUAC associated -solution model successfully represented the liquid-liquid equilibria of acetic acid, benzene and triethylamine.
在立足于国产制芯原材料的基础上，研究了三乙胺冷芯盒工艺对砂芯性能的影响。
Based on domestic materials used in the Phenolic Urethane Cold Box Process (PUCB), the relationships between coremaking parameters and the properties of cores have been studied.
在立足于国产制芯原材料的基础上，研究了三乙胺冷芯盒工艺对砂芯性能的影响。
Based on domestic materials used in the Phenolic Urethane Cold Box Process (PUCB), the relationship between core making technique and the properties of core was analyzed.
详细研究了三乙胺的用量、表面活性剂、反应温度和时间对产物形貌及尺寸的影响。
The influences of triethylamine amount, surfactant, reaction temperature and time on the size and shape of lanthanum hydroxide nanorods were investigated in detail.
本文通过对无水氟化氢和三乙胺的混合溶液在一定条件下的电解氟化，制备全氟三乙胺。
Perfluorotriethylamine is fabricated through electrochemical fluorination of triethylamine in anhydrous hydrogen fluoride under a certain condition.
以异丁醛和甲醛为原料，三乙胺为催化剂，羟醛缩合法合成了2，2-二甲基-3-羟基丙醛。
The preparation of 2,2-dimethyl-3-hydroxy propanal from the condensation of formaldehyde and i-butyraldehyde by using triethylamine as catalyst was studied.
具有工艺先进、无副反应、产品质量高、能耗低，能同时生产—乙胺、 二乙胺、 三乙胺等的优点。
The whole process is advanced in technology, no other side reaction, high in product quality and low in material consumption.
设计合成了一系列基于咪唑、吡啶和三乙胺阳离子的离子液体，通过核磁共振氢谱和红外光谱对离子液体结构进行了表征。
A series of imidazolium, pyridinium and triethylamine cation-based ionic liquids were designed and synthesized as catalyst. The ionic liquids were characterized by 1h NMR and IR.
实验以盐酸三乙胺-三氯化铝离子液体（IL）为催化剂，催化水杨酰胺（SA）与乙酰氯进行傅克酰基化反应合成5乙酰水杨酰胺。
Friedel-Crafts acetylation of salicylamide(SA) with acetyl chloride to 5-acetylsalicylamide using triethylammonium chloroaluminate ionic liquid(IL) as both catalyst and solvent was investigated.
实验以盐酸三乙胺-三氯化铝离子液体（IL）为催化剂，催化水杨酰胺（SA）与乙酰氯进行傅克酰基化反应合成5乙酰水杨酰胺。
Friedel-Crafts acetylation of salicylamide(SA) with acetyl chloride to 5-acetylsalicylamide using triethylammonium chloroaluminate ionic liquid(IL) as both catalyst and solvent was investigated.
应用推荐