go top

plastic flow

  • 塑性流动:在持续力的作用下,固体物体发生永久性变形或形状改变而不发生断裂的现象。

网络释义专业释义

  塑性流动

... plastic deformation 塑性变形 plastic-flow 塑性流动,粘(滞)流(动) plastic Kivar 聚丙烯合成纸(美国Scott Paper产品,商业名称) ...

基于40个网页-相关网页

短语

Plastic flow 塑性流动 ; 塑性流 ; 塑性流变

Bingham plastic flow 宾厄姆塑性流

Plastic Flow Of Steel 钢的塑流

free plastic flow 自由塑性怜

pseudo-plastic flow 假塑性流动

plastic flow rule 塑性怜规则

plastic flow persistence 塑性后效

pseudo plastic flow 伪塑性流 ; 伪一级反应

complex plastic flow 复数塑性流动 ; 复合塑性流

 更多收起网络短语
  • 塑性流动 - 引用次数:24

    An adaptive EFG-FE coupling method based on the rigid-visco plastic flow theory was proposed. Key techniques and algorithms in the numerical analysis were developed.

    在现有耦合方法的基础上,根据工件变形情况实现有限元与无网格计算区域的动态转换与耦合,提出基于刚(粘)塑性流动理论的自适应耦合无网格-有限元方法,发展了数值模拟中的关键技术与算法。

    参考来源 - 金属成形过程自适应耦合无网格—有限元法数值模拟技术研究
  • 塑性流动 - 引用次数:13

    The results show that liquefied sand-gravel specimens reloading behavior is distinctly different from those without dynamic loading. The reloading stress-strain curve is composed of three parts approximately, which is stiffness-recovering part, stiffness-stabilising part and plastic flow part.

    结果表明:饱和砂砾料液化后静力再加载时其应力~应变关系与未经振动荷载作用的试样明显不同,可分为三个阶段:模量恢复段、模量稳定段和塑性流动变形阶段。

    参考来源 - 饱和砂砾料液化及液化后变形与强度特性试验研究
    塑性流
    塑性怜
  • 塑料流动 - 引用次数:4

    Plastic flow in thermal-stress field is simulated by ANSYS software.

    采用ANSYS软件对温度压力耦合场下塑料流动进行了仿真。

    参考来源 - 温度压力作用下塑料流动对微通道成形影响的研究
    塑性怜
  • 塑流 - 引用次数:5

    With respect to the anti-slide resistance measures of embankment on soft clay ground, loading berm method and decrease the slope of the embankment are compared using plastic flow theory.

    针对软基堤坝的抗滑稳定措施,应用塑流理论分析、比较了反压平台和放缓边坡的稳定效果。

    参考来源 - 软基堤坝原位监测及稳定性研究
  • 塑性流
    塑性流动
  • 塑性怜
  • 塑性怜

·2,447,543篇论文数据,部分数据来源于NoteExpress

双语例句权威例句

  • So this whole portion here is plastic flow.

    部分塑性流动

    youdao

  • Silicone rubber insulation compounds are inherently soft and pliable and resists the plastic flow that characterizes many insulation systems.

    硅橡胶绝缘化合物性质柔软圆滑可抵抗具有许多绝缘系统塑性流动

    youdao

  • Special instances of plastic flow are cold flow, which occurs in vulcanized rubber after low stress has been continuously applied for a long time, and creep of metals.

    塑性流动特殊情况变形发生硫化橡胶时间连续承受应力以及金属蠕变时。

    youdao

更多双语例句
$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定