试验是在大展弦比机翼颤振模型上进行的。
The tests are conducted on a wing model with large aspect ratio.
传统的飞机风洞颤振模型不能反映飞机的结构特性。
The structure of the aircraft can not be reflected in the conventional wind tunnel flutter model.
本文探讨了飞机低速颤振模型刚度模拟计算的一种方法。
In this paper a stiffness simulation calculation method of low speed flutter models of an aeroplane is studied.
本文介绍了带外挂风洞颤振模型模态试验与参数识别方法。
Modal test and parameter identification of a wind tunnel flutter model simulating a wing with external missiles are presented in this paper.
本文介绍了带外挂风洞颤振模型模态试验与参数识别方法。
Modal test and parameter identification of a wind tunnel flutter model, similar to a wing with external missiles, are presented in this paper.
根据实际问题的物理模型,并通过对机翼颤振模型设计原理的分析,建立了优化设计的数学模型;
The math model, based on real physical one, was modeled according the essential theory and design course of the flutter wing model designing.
金属飞机结构到复合材料结构的颤振模型设计,要求采用刚度等代法来完成,然而一般的设计方法通常需要消耗大量时间。
Design of flutter model from aircraft metal structure to composite structure can be achieved by equation of stiffness, yet it may cost much time for general design method.
在此基础上建立了完整的机翼颤振模型工程优化设计方法,使该方法能够应用在模型设计的很多方面,为工程设计提供了一种有效的手段。
An optimization method of flutter wing model was developed and was used in many aspects of model designing, providing an efficient design method in engineering.
对跨声速飞机机翼作了跨声速非定常气动力计算,对跨声速民航机机翼的颤振模型作了颤振计算,与TDLM的比较表明,两者结果有较好的一致性。
The unsteady aerodynamic results of the transonic wing are presented, and flutter calculation is made. The comparison with TDLM shows that the agreement is very good.
提出了直升机模型桨叶颤振试验技术及试验方法。
An experimental technique and method for flutter research of helicopter blade model are proposed.
通过所建理论模型及铣削试验讨论了铣削过程中强迫振动、颤振的产生条件及特点。
Through the theoretical model and milling experiment they discuss the condition of producing forced vibration and chatter in milling process and the chatter characteristics.
建立了金属切削过程的二维颤振数学模型;
This Paper present a two-dimensional non-linear dynamic cutting model.
第四个模型可用来进行颤振试验。
根据动态铣削模型,设计颤振可重复试验和可控试验。
According to Altinats's milling system vibration model, the repeatable experiment and controllable experiment were made.
存得到切削力模型和机床结构振动模型的基础上,着重研究了再生型颤振对铣削加工过程稳定性的影响。
On the basis of cutting force model and vibration model of machine tools structure, the effect of the regenerative chatter on the stability of end milling is focused.
本文对于现有的叶片失速颤振计算模型进行了一些改进,以期使其更接近于真实物理图画。
Some improvements in previous computation models of blade stall flutter in axial-flow compressors have been made on both aerodynamics and structural dynamics so as to make the models more practical.
本文简要地阐述了具有后缘控制面的二元机翼模型主动颤振抑制低速风洞试验的全过程。
This paper gives a brief description of the whole process of the low-speed wind tunnel test for active flutter suppression of a two-dimensional wing model with trailing edge control surface.
针对规避切削颤振问题,应用相对切削速度概念,提出了速度型动态切削力表达式以及车削或镗削的振动力学模型。
Applying the concept of relative cutting velocity, the expression of velocity type dynamic cutting force and the mechanics model of chatter vibration in turning or boring process were advanced.
结合某大型飞机机翼颤振吹风模型的动力设计,本文给出了工程应用的具体数值例子。
Combining dynamic design of wing flutter model for a giant transport aircraft, a numerical example of engineering application is presented.
针对数控强力切削中颤振问题,建立了包含切削过程颤振环节的数控强力切削伺服系统数学模型。
Faced with chatter during CNC heavy cutting, we constructed the mathematical model of CNC heavy cutting servo system which contains chatter in the process of cutting.
为了验证非线性颤振边界的求解方法,还利用ONERA气动力模型中的线性部分建立了夹芯翼的线性颤振方程。
In order to validate the presented method, the linear flutter equations of the sandwich wing are established using the linear part of the ONERA model.
建立固有振动频率和颤振阻尼对结构参数的敏度公式,设计两种不同优化问题的数学模型。
The sensitivity formulas about natural frequency and flutter damp to structure parameters were discussed, and the math models about optimization design were established.
一种新的颤振分析方法——鲁棒颤振裕度法被介绍,它利用结构奇异值理论将系统模型和试飞数据有机结合起来进行颤振边界预测。
Pass to incorporate organically the flight test data and the system model, make use of the structured singular value theories proceed the flutter boundary estimate.
本文对主梁的颤振导数识别,采用与主梁颤振分析试验相同的节段模型和测量装置,以自由振动法进行试验。
This paper makes use of free vibration method, using the same model and measuring device to identify the flutter derivatives of the girder.
利用结构奇异值理论将颤振理论模型和试飞数据有机结合起来,进行了颤振边界预测。
It incorporates organically the flight test data and the flutter theory model by the structured singular value theories, to process the flutter boundary estimate.
随后,根据速度反馈和位移延时反馈的颤振原理,建立了深孔钻削加工两自由度颤振动力学模型。
Secondly, dynamic model of deep-hole drilling system with the two degrees of freedom are established in the light of principles of machining chatter in cutting processes.
基于结构的有限元全物理模型,提出了一种双参数全模态颤振分析方法,并在ANSYS中实现。
A new approach of full-mode flutter analysis with double parameters is proposed, which is realized in ANSYS, based on the full-order discretized physical model of structure.
论文使用了现代参数辨识技术的ARMAX模型递推法和状态子空间辨识法,对飞行颤振试验数据进行处理,辨识飞机的颤振模态参数。
ARMAX model method and subspace-based state space method were used to process the flight flutter test data, and identify the flutter modal parameters of aircraft.
论文使用了现代参数辨识技术的ARMAX模型递推法和状态子空间辨识法,对飞行颤振试验数据进行处理,辨识飞机的颤振模态参数。
ARMAX model method and subspace-based state space method were used to process the flight flutter test data, and identify the flutter modal parameters of aircraft.
应用推荐