采用热压注工艺成型氧化硅基陶瓷型芯。
Abstract :The silica based ceramic cores were formed by hot pressure molding method.
针对压电陶瓷型换能器，进行了补偿设计。
The compensation techniques are used for piezoelectricity transducer.
利用水溶型芯和陶瓷型芯，我们可以铸出更深的孔。
Deeper holes can be casted by using soluble cores and ceramic cores.
通过烧结实验，验证了硅溶胶在陶瓷型中的粘结作用；
Through(sintering) experiment, the adhesive effect of silicon gel in ceramic mould is verified.
详细介绍了一种根治陶瓷型铸件表面脱碳的方法并分析其原理。
The technique by which surface decarbonization of Shaw process castings can be completely eradicated was introduced in detail, and the theory is discussed.
利用水溶型芯和陶瓷型芯，我们可以铸出更深和更复杂的孔和槽。
Deeper and more complicated holes and slots can be casted by using soluble wax cores and ceramic cores.
该陶瓷型用于制作金属工艺品，尺寸精度和表面粗糙度均达到技术要求。
Both dimensional accuracy and surface roughness of the metal handicraft in ceramic mold meet technological requirement.
通过试验研究表明，附加物能阻止陶瓷型烧结，使其清砂效率显著提高。
Experiments and studies show that the carbon-base or the resin-base additives can impede or reduce sintering.
其中一个方法是将原型转换成陶瓷型，再利用铸造的方法转换成金属型。
A method among them is to change the prototype into a pottery type, utilize the method to cast to change into a metal type.
用陶瓷型芯可铸造出更深的孔，但会额外增加费用，只适宜于大批量生产。
The scope can be enlarged by the use of pre-formed ceramic cores at additional cost, only economical for large quantities.
采用熔模、陶瓷型铸造工艺来制造小型水轮机叶片和水斗是一种最佳的选择。
Investment cast and ceram cast are best technology for the fabrication blade and bucket of small turbine.
利用挤压成型的方法，制备了应用于钛合金高尔夫球杆头精密铸件的陶瓷型芯。
The ceramics core was prepared by extrusion moulding applied in the titanium alloy golf club head.
本文叙述了采用金属面层陶瓷型壳工艺，研制大型薄壁壳体类钛合金精密铸件。
This paper describes the research and manufacture of titanium investment casting for large sized housing type structure of thin wall using the ceramic shell with metal face layer.
快速原形制造技术与陶瓷型精密铸造相结合是目前金属模具快速制造的有效方法。
Combining rapid Prototyping with Manufacturing Technology for Ceramic Mould in Investment Casting is an effective method for rapidly making metal die.
另外还用此类后处理件进行石膏型和陶瓷型精密铸造型腔的开发，均取得了较大进展。
In addition, these kind of post-treatment patterns have been used to develop the plaster mould and ceramic mould and both have made great progress.
通过普通硅溶胶和快干硅溶胶的结构与稳定性比较分析快干硅溶胶陶瓷型的胶凝快干机理。
Coagulation quick drying mechanism for quick-dry silica sol ceramic shell was analyzed by comparison between the stability and structure on common silica sol and quick-dry silica sol.
介绍了陶瓷型铸造制模的工艺过程和工艺特点，并指出了陶瓷型铸件常见缺陷及防止方法。
Introduced molding process and characteristics of ceramic die-casting technology, and pointed out prevention for the ceramic die-casting common defects.
讨论了磷酸铝粘结剂的制备工艺及粘结机理，陶瓷型过滤片的原料组成和配比，烘干和烧结工艺。
The preparation and mechanism of bonding for aluminum phosphate as binder, raw materials and its ingredient, drying and sintering for the flat ceramic filter have been discussed.
另外，对于陶瓷型芯与型壳定位的精确度、性能匹配性对高温合金空心叶片质量影响进行了评述。
In addition, the important influence of positioning accuracy and the consistency of ceramic cores and shells on the quality of superalloy hollow blade was evaluated.
直接利用激光快速成型的原型树脂模，结合陶瓷型精密铸造技术，制得了高精度、低表面粗糙度、高使用寿命的钢模具。
The steel dies with high dimensional accuracy, low surface roughness and long service life have been quickly produced by using prototyping resin molds as patterns of ceramic investment casting.
对陶瓷型芯的基体和辅助材料、陶瓷型芯的制备与性能要求、常用的陶瓷型芯及新开发的纳米复合陶瓷型芯进行了阐述。
The material, preparation and property requirements of ceramic core and conventional ceramic core as well as newly developed nano-compound ceramic core were expounded.
结果表明，氧化锆陶瓷型芯的物理性能能够满足钛合金高尔夫球杆头铸造要求，该陶瓷型芯与钛合金液不发生明显的界面反应。
It is shown that the ceramics core is excellent in the physical characteristics. And it is not obvious in the interface reaction with liquid of titanium.
以上述思想为基础，本论文研究了以快速原形技术和陶瓷型精密铸造为基础的快速模具制造工艺，并将该工艺用于汽车发动机进气歧管铸造模具的快速制造。
Basing on the foregoing, we explored a rapid mould process consisting of RP and precision casting and used it to manufacture a casting mould for Changan auto-engine inhaust tube.
被称为多尔·切斯特2 (DorchesterLevel 2)的陶瓷装甲，在英国挑战者2型(British Challenger 2)坦克使用，据报道说至少可承受比相同重量钢铁能承受压力的三倍。
A ceramic armour called Dorchester Level 2, used on British Challenger 2 tanks, is reportedly at least three times as resistant to some strikes as the same weight of steel.
本文采用粉末冶金法研制了PZT系独石型梯度功能压电陶瓷驱动器。
A monolithic piezoelectric actuator based on functionally gradient PZT ceramics was prepared by powder metallurgical process.
采用溶胶-水热法，在较低的温度下已成功地合成了多种结晶良好的纳米或亚微米钛基钙钛矿型陶瓷粉体。
Many kinds of well-crystallized nanometer or submicron Ti -based perovskite ceramic powders were already synthesized successfully by sol-hydrothermal method at lower temperatures.
陶瓷托槽抵抗转矩力的强度高于被检测的两种迷你型金属托槽，低于其他金属托槽。
The degree of strength of the ceramic bracket was higher than that of the mini metal bracket.
研究了五种不同水泥基体及三种不同陶瓷功能体对0 - 3型水泥基压电复合材料压电、介电、铁电性能的影响。
Influences of different cement matrix and ceramic on the piezoelectric properties, dielectric properties and ferroelectric properties of the 0-3 cement-based piezoelectric composites are studied.
应用钙钛矿型氧化物高温质子导电陶瓷，已经制备了几种质子导电器件，虽然尚处于实验室规模但已证明具有肯定的技术功能。
Using high temperature proton conducting ceramics based on perovskite type oxides, some of the devices were made on a laboratory scale, and have been positively verified to work.
介绍了在CARDC等离子体风洞中开展的非烧蚀型防热材料超高温陶瓷（UHTC）的试验研究结果。
The test results of non-ablative ultra-high temperature ceramic materials(UHTC) in one of the plasma wind tunnels of CARDC are introduced in this paper.
应用推荐