这款机械使用标准的安全限位开关。
The machine is standard with a complete set of safety limit switches.
限位开关同时连接在计数电路上。
The limit switch is also connected with the scaling circuit.
这个限位开关装在什么地方？
上限位开关断路性损坏。
KXK和GXK分别为行程开向、关向限位开关。
KXK, GXK designate respectively limit switches in open and close direction.
舵角限位开关。
限位开关被用来检测是否所有镙钉被安装在产品上。
The limit switches are used for detecting whether all screws are attached to a product.
对触点信号动作和限位开关的工作状态进行了说明。
Valve contact output action and work status of limit switch are illustrated.
还以软件限位开关为例对软件机械概念作了进一步阐述。
The software limited switch is introduced as an example of software machinery in this article.
采用限位开关、按钮、数码管、直流电机等器件实际制作。
The elevator model was made by using devices such as limit switch, nixie tube, direct current motor.
压下限位开关，切断电路停车，再合闸时，吊钩只能下降。
Pressure limit switch circuit is cut off, stop, and then closing, the hook can only decrease.
辅助限位开关可能用来完成其他功能如启动或停止泵的运行。
Auxiliary limit switches may be used to perform other functions such as starting or stopping a pump.
阿鲁- M型有一个限位开关，并可以检查行动中，由监测。
The ARU-M type has a limit switch and can check the operation by monitoring.
在电动执行器里，主要限位开关用来控制阀门的开启和关闭位置。
In Electric actuators, the primary limit switches are used to control the open and closed position of the valve.
由接触器与限位开关组成的控制电路可完成对堆垛机的半自动控制。
The operator's cabin can move up and down along the mast. Semiautomatic control of stacker crane is realised by a control circuitry composed of contactors and limit switches.
XYZ轴方向均设置了行程限位开关，避免了运转过程中超程的烦恼。
The XYZ axis is arranged trel limit switch, to oid the operation process of the trouble.
限位开关多数情况下是机械式，并靠控制杆或压杆进行物理接触激发的。
Limit switches are most often mechanical and are activated by physical contact with either a lever or plunger.
本实用新型可对限位开关进行精确的定位，保 证塑胶模具的生产质量。
The adjustable limit switch of plastic moulds can precisely position limit switches, and guarantee the production quality of plastic moulds.
基本设置：选择板子类型，温度传感器类型，轴比率，及限位开关设置。
BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration.
在溜板一侧装有限位碰铁，与限位开关感应，实现机床的拉削与返回功能。
In one side of the slide carriage, there is limit cam, response to the limit switch, to realize the broaching and returning function of the machine tool.
力矩开关可提供过载保护。限位开关可用来方便调整阀门的极限开度位置。
Torque switch offers over loading protection. Limit switch manipulate the utmost open position.
这些模块可提供两个选择限位开关，显示，平方根提取和标准化的输出信号。
The modules are selectively available with two limit switches, display, square root extraction and standardised output signals.
吹灰器按钮盒，限位开关等及电机都应在工厂就把电线全部连接到电机启动器上。
Sootblower pushbuttons, limit switches, etc., and motor shall be completely factory wired to the motor starter.
起升电机，减速器、卷筒和起升限位开关的一体化紧凑型设计节约了用户的使用空间。
The integrated and compact design of hoisting motor, reducer, reel and limit switch saves space for the user.
最初的设计采用了六角扳手连接到限位开关轻轻敲击在打印床上的自校准不同的位置。
The original design uses an allen key connected to a limit switch to gently tap on different location on the print bed to self calibrate.
压杆抬起，即停机； 盖子没有盖好，机器不能启动； 多重限位开关，保证安全生产；
One interlock stops the machine when the lever is lifted, A second interlock prevents the machine from starting if cover is not in place;
行程通过两端限位开关控制，同时辅以两侧的弹性缓冲垫，有效地保证了机床运动的安全性；
Trip ends by limit switch control, at the same time, with both sides of the elastic cushion, effectively guarantee the safety of the machine tool movement;
三相电源的接入必须按照图示的相序关系，相序错位将导之限位开关不能正确限位的严重后果。
Three-phase power supply phase sequence access must follow the relationship shown, phase sequence dislocation will guide the limit switch not properly limit the serious consequences.
三相电源的接入必须按照图示的相序关系，相序错位将导之限位开关不能正确限位的严重后果。
Three-phase power supply phase sequence access must follow the relationship shown, phase sequence dislocation will guide the limit switch not properly limit the serious consequences.
应用推荐