已经注意到这些新的防腐措施。
Attention has been paid to the new measures to prevent corrosion.
木构架和金属底盘都没有采取防腐措施。
Neither the timber frame nor metal chassis were protected against rot.
为此提出了防腐措施。
如果你采用了好的防腐措施,这些套管就不会生窍。
If you take good measures to prevent corrosion, rust will not be formed on these casings.
分析了转化器腐蚀原因,并提出相应的防腐措施。
The article gives you the reason of convertor corrosion and anti - corrosion method.
主要介绍了肉制品的防腐措施与复合防腐剂的应用。
In this paper, meat preservative measures and application of complex preservative were introduced.
因此,必须要采取有效的防腐措施,确保建筑结构安全。
Therefore, we must adopt effective anti-corrosion measures to ensure the structural safety.
通过分析,确定腐蚀类型、机理、原因,并提出防腐措施。
The authors analyze and confirm the type, mechanism and reason of corrosion, and take some measures for anti-corrosion.
防腐措施主要是对原油深度脱盐并在塔顶注入中和剂和缓蚀剂。
The main anticorrosion measures are to intensively desalinate crude oil and inject neutralizer and corrosion inhibitor through the top of the column.
本文主要讲述甲醇装置主精馏塔侧壁腐蚀的修复方法和防腐措施。
This article gives an account of ways of mending and preventing erosion of methanol equipment main rectifying tower.
根据多年积累的数据,归纳出油罐的腐蚀规律及应采取的防腐措施。
The corrosion pattern of oil tanks and anticorrosion measures are summed up based on the data accumulated in past years.
本文分析了煤气横管终冷器的腐蚀原因,并提出了相应的防腐措施。
The corrosion causes on the Cross-tube gas final cooler were analyzed in the pa per and the anti-corrosion measures were proposed.
提出了设备产生腐蚀的原因和有效的防腐措施,装置达到了长周期运行。
The cause of corrosion was investigated and anti-corrosion measures have been used for obtaining long-term running.
介绍钢箱梁内部作为防腐措施之一的除湿系统的工作原理、设计和安装。
Working principle, design and installation of dehumidification system as one of preservation methods are introduced.
本文分析了B757飞机右主起落架后轮轴断裂原因、腐蚀状态及防腐措施。
This paper analyses the cracking cause, corrosion condition and anticorrosion measurements of the backaxle of aircraftB757 main landing gear.
阐述了凝汽器冷凝管腐蚀泄漏的原因,在防腐措施中主要讨论了选择管材的问题。
States the causes of corrosion and leakage of condensing tube in condenser. Mainly discusses the selection of tube material among the anticorrosion measures.
本文重点论述了混凝土中钢筋的化学腐蚀机理、腐蚀条件、腐蚀危害及防腐措施。
This paper mainly discusses the mechanics, conditions and harmfulness of chemical corrosion in concrete and puts forward some anticorrosive measures.
阐述了离子膜烧碱主要生产工序介质的腐蚀性及对主要设备、泵、阀所采取的防腐措施。
The corrosiveness of medium in the main process of ionic membrane caustic soda production, and anticorrosion measures of main equipment such as pumps and valves were explained.
目前,船舶上层建筑采用复合防腐系统,即防腐涂层和牺牲阳极系统相结合的防腐措施。
Nowadays, the complex anti-corrosion system is used for the ship superstructure, which is the combination of the anti-corrosion coat and the sacrificial anode system.
本文针对湿法脱硫中不锈钢脱硫塔的防腐失效原因进行了分析,并采取了相应的防腐措施。
This paper analyzed the reasons of the invalidation of the corrosion protection measurements in the stainless steel desulfurizer, and relevant anti-corrosion measurements were introduced.
湿法脱硫后烟气的特点和腐蚀性对脱硫烟囱的运行工况和脱硫烟囱防腐措施均有很大的影响。
The characteristics and corrosiveness of the flue gas after wet FGD significantly affect working conditions and anticorrosion measures of stacks.
根据货物特性,采取防潮,防霉,防锈,防锈,防腐措施确保货物在到达目的地时完好无损没有受到腐蚀。
According to their characteristics, adopt moisture, mould, rust and corrosion resisting measures to.
通过对管道承插口和预应力钢筋采取不同的防腐措施确保管道在海水环境中达到安全使用的目的。
Different corrosion prevention measures for the bell and spigot joints of the pipe and the prestressed steel bares are adopted to ensure the safety performance in Marine environment.
通过监测,摸清了生产工况下管柱腐蚀的机理、速率和位置,提出了针对性强的防腐措施和方向。
By monitoring, the erode mechanism, speed and position of stem in working procedure has been known and measures and direction to control erode has been suggested.
其次,聚合氯化铝适合所有的水处理设施,所以一定要做好防腐措施,延长设施的使用寿命。 。
Second, polyaluminium chloride is suitable for all water treatment facilities, so be sure to prepare anticorrosion measures, prolong the service life of facilities.
分析腐蚀原因,认为冲刷和碱性溶液对金属材质侵蚀性腐蚀是主要因素,进而制定相应的防腐措施。
Reasons for corrosion were analyzed. It is suggested that aqueous alkali and liquid brushing are the main factors for erosion of metal material. Aimed at...
介绍福建炼油化工有限公司加氢精制装置中RN-10催化剂器内稀释空气烧焦再生过程及防腐措施。
The in situ regeneration of RN-10 hydrofining catalyst by diluent air, and the corrosion prevention measures of the hydrofining unit in Fujian Refinery and Petrochemical Company were introduced.
文章最后,提出了通过运行控制弱化腐蚀环境烟囱防腐措施,介绍了目前常见的烟囱防腐涂料和内衬。
Finally, put forward measures to weaken the chimney corrosive environment by the operation of power plants, describes the current common anti-corrosion coating and lining in the chimney.
其中的防腐措施选择及施工至关重要,它能有力地保证建筑物及设备的使用,尽可能地发挥旧建筑物的作用。
Thereinto, the choice of antisepsis measure and construction is very important to emolliently promise the usage of building and equipments and possibly develop the function of old building.
其中的防腐措施选择及施工至关重要,它能有力地保证建筑物及设备的使用,尽可能地发挥旧建筑物的作用。
Thereinto, the choice of antisepsis measure and construction is very important to emolliently promise the usage of building and equipments and possibly develop the function of old building.
应用推荐