铸铁划线平台是用铸铁材料做成的平板。
Cast iron is cast iron material crossed platform made of flat.
介绍钒在铸铁中的作用及含钒铸铁材料。
The effect of vanadium in cast iron and V - containing cast irons was introduced.
介绍氮在灰铸铁中的作用及含氮灰铸铁材料。
The effect of nitrogen in gray irons and nitrogen- containing gray irons was introduced.
所用铸铁材料为细颗料的灰口铸铁或合金铸铁。
Cast iron material used for fine makings of gray iron or alloy cast iron.
因此,确定球墨铸铁材料对激光的吸收率十分必要。
So it is necessary to determine the laser absorptivity of ductile iron.
由于铸铁材料的特殊性,为金刚石工具的应用提供可能。
It is the specialty of cast iron that makes diamond tool application possible.
研究了激光表面强化对孕育铸铁材料组织和性能的影响。
This paper deals with the effect of laser surface strengthening on microstructure and properties of inoculated cast iron HT300.
系统地研究了铸铁材料在干滑动摩擦条件下的摩擦学特性。
The tribological characteristics of cast iron under dry sliding condition was systematically investigated.
文摘:系统地研究了铸铁材料在干滑动摩擦条件下的摩擦学特性。
Abstract: The tribological characteristics of cast iron under dry sliding condition was systematically investigated.
阐述了深冷处理对工具钢、其他钢铁材料及铸铁材料耐磨性的影响。
The effects of the cryogenic treatment on the wear resistance of tool steel, other steels and cast iron materials were discussed.
为激光处理球墨铸铁材料时工艺参量的选择和优化提供了一定参考。
It provides some reference for the selection and optimization of technical parameters during the laser material processing.
从铸铁材料和切削铸铁的刀具材料两个方面,综述了提高铸铁切削性能的研究状况。
The advances in the improvement of machinability of cast iron were reviewed from the views of both cast iron itself and the materials of its cutting tools.
利用钛的“双重性”,加入适当的质量分数,是提高铸铁材料质量的重要课题之一。
How to utilize the "dual nature" of titanium, by adopting proper addition of titanium, to increase the quality of cast iron will be a important subject to study.
在粗轧阶段选用了合金半钢材料轧辊,在精轧阶段选用了铬钼无限冷硬铸铁材料的轧辊。
In the process of rough rolling, the alloy semisteel was chosen, and the unlimited chrome and molybdenum chilled iron roll material was used in the process of fine rolling.
对要求高耐磨的大型工件常用的亚共晶白口铸铁材料进行了不同条件的激光表面强化处理。
The surface of the hypoeutectic white cast iron of great wearable work piece in common use was treated by laser hardening.
在普通高铬铸铁的基础上,研制了一种用于制造螺旋分级机小叶片的高合金耐磨铸铁材料。
Based on the ordinary high chromium cast iron foundation, designed one kind of high alloy abrasion-resisting cast iron material which is used to make the lining iron of the screw grader.
通过理论的分析,提出金刚石工具加工铸铁材料的可行性,并通过具体工具的应用证明论点的正确。
The theoretical analysis has proved the feasibility of processing cast iron with diamond tool and the actual application of the tool demonstrated the viewpoint was correct.
通常球墨铸铁与其他铸铁材料一样被认为属于脆性材料,断裂韧度应该用线弹性力学理论进行研究。
The ductile cast iron and the other cast iron usually belong to the brittleness material. It's the fracture toughness should studied by linear elastic mechanics.
具有良好的密封型,外壳采用高强度铸铁材料,轴承选用SKF轴承,确保电机在恶劣的环境下可靠运行。
It has good airproof, and the frame material is used with high strength cast iron, SKF bearing. These ensure the motor can reliably run under the tough condition.
本研究针对常用的灰铸铁及球墨铸铁材料分别进行激光处理、感应淬火和氨化处理,然后进行耐磨性对比试验。
This paper is the research of wear resistance for the specimen of grey cast iron and nodular iron by laser treating, induction hardening and nitrocarburizing.
选用具有典型细观结构特征的球墨铸铁材料进行试验,探讨这种金属材料在各种三轴应力状态下的细观损伤破坏。
Nodular cast iron specimens with typical mesostructure are tested to study the meso damage evolution and failure mechanism at different triaxial stress states.
除了厚实的铜锅之外,我们觉得最棒的万能材料是厚实的搪瓷铸铁。
With the exception of heavy copper, the best all-purpose material, in our opinion, is heavy, enameled cast iron.
由于生铁和废钢铁都便宜,又因为不需要昂贵的精炼过程,和钢相比铸铁是一种廉价材料。
Since pig iron and scrap are cheap, and because there is no expensive refinement process, cast iron is a low cost material compared with steel.
通过优化设计并进行了大量的试验,选择了综合性能优异的特种蠕墨铸铁作为制动盘材料。
By optimizing design and conducting a series of tests, a kind of special vermicular iron with excellent properties was chosen as the material for making the braking disc.
同时,由于采用普通铸铁作为模具主体材料,降低了成本。
Meanwhile, common cast iron was used as the main material of the die so that the manufacture cost was lowered.
黑色工具材料以铁为基材,包括工具钢,合金钢,碳钢,铸铁。
Ferrous tool materials have iron as a base metal and include tool steel, alloy steel, carbon steel, and cast iron.
成功研制了中速磨磨辊新材料——锰钼复合高铬铸铁。
The new material for medium speed grinding roll-MnMo compound high chromium cast iron has been developed successfully.
喷射泵可由各种各样的材料制成,例如铸铁、钢、不锈钢、哈氏合金、钛、搪瓷、玻璃、塑料和石墨,并可制成各种尺寸。
Jet pump may be all kinds of material, such as cast iron, steel, stainless steel, Hastelloy, titanium, ceramic, glass, plastics and graphite, and made of various sizes.
潜水电机壳体,包括机架,尾轴承架,法兰和罩盖总装,必须采用符合美国材料试验协会ASTM A - 48类别30标准的、密实的铸铁或更好的材料制造。
The submersible motor enclosure including frame, end brackets, flanges and cap assembly shall be constructed of close-grained cast iron, ASTM A-48, Class 30 or better.
潜水电机壳体,包括机架,尾轴承架,法兰和罩盖总装,必须采用符合美国材料试验协会ASTM A - 48类别30标准的、密实的铸铁或更好的材料制造。
The submersible motor enclosure including frame, end brackets, flanges and cap assembly shall be constructed of close-grained cast iron, ASTM A-48, Class 30 or better.
应用推荐