用截管器尾部的铰刀清除毛边。
Use the reaming blade on the end of the tube cutter to remove any burrs.
阐述了合理使用与重磨铰刀的方法。
This paper explains the method of reasonably use and regrinding of reamer.
铰刀的精度是以胎具的制造精度为基础。
规格：麻花钻、三刃钻、铰刀、立铣刀。
Specification: twist drill, three-blade drill, reamer, end-milling cutter.
铰削铁链时铰刀不能歪斜。
把螺旋铰刀给我拿过来。
利用内镀方法制造金刚石铰刀是一种精密铰刀制造方法。
Inside-holding electroplating process is a precise technique in producing diamond reamer.
入口推力器，磨米室，大米筛，大米铰刀，米辊，出口等。
It is consisted of entry thruster, rice grinding room, rice griddle, rice reamer, rice roller, exit etc.
产品特性表。第86部分：钻，埋头钻和带分度镶齿的铰刀。
Tabular layout of article characteristics - part 86: drills, counter sinking and reaming tools with indexable inserts.
现有气门铰刀是固定的，一套铰刀的刀头(刀盘)多达十多只。
The existing valve reamer is stationary, and more than ten bits (cutter heads) of one set of reamers are arranged.
主要用于刃磨铣刀、铰刀、拉刀、盘形车刀、插齿刀及扩孔钻等。
Mainly Renmo milling cutter, reamer, pulling knives, plate-shaped lathe tool, knife inserted teeth and bore drilling.
采用金刚石铰刀加工阀孔，生产率高，刀具寿命长，表面粗糙度低。
The machining of valve bore with diamond reamer features high productivity, long service life of reamer and lower surface roughness.
主要介绍的工具有：钻咀(头)、磨盘、铰刀、磨头、磨轮、磨轴。
The tools introduced include drill, millstones, reamer, grinding head, grinding wheel, grinding shaft.
本产品可使用于铣刀，钻头，铰刀，丝攻及可夹任何直式的刀具及工具。
The product can be applied for end mills, drill bits, drill reamers, taps, and can clamp any straight cutters and tools.
介绍了金刚石铰刀加工精密孔时容易出现的问题，并分析了其产生的原因。
This paper introduces the common problems in processing precision holes with MBD, and analyses on the reasons of their occurrence.
并提供了大量的实践数据供使用者参考，为镗铰刀的设计和使用提供方便。
A great deal of experimental data was provided for users so that the design and use would be easy.
尾架主要用来安装后顶尖，以支撑较长工件，也可安装钻头、铰刀等进行孔加工。
The frame is mainly used to after installation, to support a top attractions, also can install a bit, reamer hole processing, etc.
针对钻铰刀在刃磨过程中出现的摆差偏大的问题，进行了分析，并提出解决方案。
In view of the great pendulum difference in the process of grinding, an analysis is made and a solution is put forward.
通常使用的是基孔 制，因为这会减少所需要的钻头、铰刀、拉刀和计量工具的种类。
Usually the hole-based system is used, as the results in a reduction in the variety of drill, reamer, broach and gauge tooling required.
轴向赛车已经发布这一新的阶梯铰刀与三维标志，这使得决策洞聚碳酸酯比以往更容易。
Axial Racing have released this new stepped reamer with dimension marks, which makes making holes in lexan easier than ever.
丝锥、铰刀、钻头、锯片、铣切刀具、磨光工具以及其它等等，所有这些方面的片镀都是很成功的。
Taps, reamers, drills, saws, milling cutters, burnishing tools, and so on, have all been successfully plated.
台式万能刀具刃磨床主要用于刃磨普通刀具， 如各类型铣刀、铰刀、车刀、刨刀、丝攻、锪钻等。
LW—2 bench style universal cutter grinder is used for grinding normal cutter such as various kingds of milling cutters, reamers, lathe tools, planning tools, screw tap and shaving drill ect.
公司产品包括：直柄、锥柄铣刀、丝锥、中心钻、倒角刀、扩孔钻、铰刀、锥钻、直钻及各类高速钢刀具。
Our products including End Mills, Machine Taps, Reamers, Center drills, Counterbore, Countersinks, Core drills, HSS tool bits and milling cutters.
本文从分析预应力混凝土空心板单体成形挤压机铰刀的服役条件出发，选择了低铬钼白口铸铁做为饺刀材质。
In this paper. Service Condition of an auto-Cutting apart extrusion machine reamer for making prestressed hollow-cored concrete articles is analysised.
金刚石铰刀具有加工精度高、表面粗糙度小、加工效率高、寿命长等优点，能很好满足高精度内孔加工的要求。
The diamond reamer has such advantages as higher machining precision, minimum surface roughness, higher efficiency and longer service life.
LW-2 台式万能刀具刃磨床主要用于刃磨普通刀具，如各类型铣刀、铰刀、车刀、刨刀、丝攻、锪钻等。
LW—2 bench style universal cutter grinder is used for grinding normal cutter such as various kingds of milling cutters, reamers, lathe tools, planning tools, screw tap and shaving drill ect.
硬质合金铰刀的高效性在机械加工中已得到广泛认同，但由于硬质合金材料本身的脆性，使其不适合用于断续切削。
Everybody knows the high efficiency of the carbide reamer, but the carbide blade is very brittle and not suit to interrupt cutting.
硬质合金铰刀的高效性在机械加工中已得到广泛认同，但由于硬质合金材料本身的脆性，使其不适合用于断续切削。
Everybody knows the high efficiency of the carbide reamer, but the carbide blade is very brittle and not suit to interrupt cutting.
应用推荐