介绍了铝热焊修复钢锭模的工艺过程。
The procedure of thermit welding for repair of the ingot die is presented in the paper.
因钢锭模表面生成气体而形成的表面针孔。
探讨了链条清理圆柱钢锭模和矩形钢锭模的机理。
This paper researches into the mechanisms of chain cleaning machine for both cylindrical and rectangular steel ingot model.
由于这是融化我跑去找完成沉重的角铁焊大型钢锭模。
As it was melting away I hurried off to finish welding a large ingot mold from heavy Angle iron.
指出钢锭馍焊补技术是提高钢锭模使用寿命的重要措施之一。
The ingot repairing welding technology being one of important measures improving ingot mould service life is put forward.
因此，在进行钢锭模设计时，应综合考虑钢锭的质量和成材率。
Therefore, both quality of steel ingot and yield are considered synthetically.
为了防止浮在钢液表面上的熔渣进入钢锭模，钢液从盛钢桶底部放出。
In order to prevent the molten slag on the top of the steel from entering the ingot moulds, the steel is poured from the bottom of the ladle.
本发明提供了一种解决圆钢锭浇铸过程中产生裂纹的钢锭模及其浇铸方法。
The invention provides the ingot mould and the casting method which solve a problem that crackles are produced during a process of casting the round steel ingots.
试验结果表明：铸渗硼灰铸铁钢锭模比同类灰铸铁钢锭模的使用寿命提高43％。
The service life of the boron surface alloying grey cast iron ingot mold is 43% longer than that of high Mn low si grey cast iron ingot mold.
主要的铸锭设备有盛钢桶和钢锭模。盛钢桶是用来盛装从炼钢炉放出的钢液的容器。
The major equipments are the ladle and the mould. a ladle is a container to hold the molten steel tapped from the steel making furnace.
主要的铸锭设备有盛钢桶和钢锭模。盛钢桶是用来盛装从炼钢炉放出的钢液的容器。
The major equipments are the ladle and the mould. a ladle is. a container to hold the molten steel tapped from the steel making furnace.
以石墨、膨润土和高炉渣为原料，以水玻璃溶液为结合剂，制成一种新型钢锭模涂料。
A new kind of coating of ingot mould was made by using graphite, bentonite and blastfurnace slags as raw materials and solution of water glass sa bonding agent.
应用该程序计算了包钢B114钢锭模内冷却的温度分布和凝固率随时间的变化规律。
Using the program, the relation between ingot temperature, solidfying rate and solidfying time of B114 ingot are obtained.
分析了传统设计在大型钢锭模上的局限性，为采用计算机设计大型钢锭模提出新的思路。
The limitation of the conventional design of the heavy duty ingot mold has been analyzed in this article.
本文提出以钢锭模一个使用周期的温度场和应力场的数值模拟结果为依据优化设计钢锭模的方法。
In this paper, the optimum designing method for dimension of ingot mould based on numerical simulation of temperature and thermal stress field in a cycle of use is proposed.
所以，在钢锭模内析出的气体没有沸腾钢多，但又在钢锭头产形成足够的气泡抵消大部分钢的收缩。
So less gas is. given off in the mould than with rimming steel, but enough bubbles form at the top of the ingot to counteract most of the shrinkage.
根据对比铝热焊与手弧焊修复工艺，阐明了用铝热焊修复钢锭模是一种高效、节能、焊接质量好的新方法。
By comparison with manual arc welding, it is found that the thermit welding is a efficiency, energy saving and high quality process for repair welding of steel ingot die.
研究了可膨胀石墨含量和温度对复合保护渣导热系数的影响规律。研究结果可用于：计算钢锭模帽口散热及帽口内钢水凝固时间；
The effect of expanding graphite content and temperature on the thermal conductivity of compound mold flux is studied through laboratorial measures.
为了提高钢锭锻压比，借鉴钢锭模设计的传统经验，对原有钢锭模结构进行了重新设计，尝试优化钢锭模结构来改善钢锭的整体质量。
Traditional experiments of ingot mould design is drawn on . The existing ingot mould structure has been redesigned and optimized to raise forging rate and improve quality of ingot.
因此，利用我国丰富的钒钛生铁资源，开展钒钛蠕墨铸铁在钢锭模、玻璃模具以及汽车刹车鼓和列车制动盘等方面的应用研究很有必要。
Therefore, it is necessary to study the application of vanadium-titanium vermicular cast iron in ingot mould, glass mold, auto brake drum and brake disc using abundant V-Ti iron in China.
使用膨胀型复合模铸保护渣保护浇注钢锭，普遍存在的一个问题是容易使钢锭产生头部积渣这一表面缺陷。
A general problem in protecting the casting ingots by using expanded complex mould casting mold powder is the surface defect that slag deposition can be evolved easily in ingots head.
钢锭 模是用铸铁做的。
采取等效模冷法，分别模拟了冷送和热送过程钢锭表面和心部温度场的演化。
Through proposed equivalent mould cooling method, the temperature evolution of cold feeding ingot and hot feeding ingot process were simulated and investigated, separately.
采取等效模冷法，分别模拟了冷送和热送过程钢锭表面和心部温度场的演化。
Through proposed equivalent mould cooling method, the temperature evolution of cold feeding ingot and hot feeding ingot process were simulated and investigated, separately.
应用推荐