采用数值分析方法对冲击压痕法测量残余应力的弹塑性变形过程进行了理论分析。
The indentation method of residue stress measurement depends on strain measurement around an indention caused by an impacting sphere.
采用数值分析方法分析了跨声速喷管无粘流动和超声速射流对挡流板的冲击流场。
Numerical analyses of the transonic nozzle inviscid flow and supersonic jet impingement on a jet TAB are presented.
本文采用数值分析方法研究井下掘进巷道内火灾所导致的继发性灾害发生的条件。
This paper numerically investigated the basic conditions and possibility of the secondary disaster in the coal mine caused by the mine fire in the laneway.
在耦合自催化反应系统中，采用数值分析方法研究了考虑时滞效应和流速扰动时子系统的动力学行为。
The dynamical behaviors of subsystem in coupling chemical reaction system with time delay as well as velocity perturbation were studied by numerical simulation.
再采用数值分析方法，包括线性特征值屈曲分析、几何非线性分析及几何、材料双重非线性分析，研究了不同加劲肋对钢筒仓仓壁稳定性能的影响。
The paper analyses the stability of rib slab on method of energy, the formula of longitudinal critical force is deduced, and rational arrangement of stiffening rib is discussed.
本文采用相似材料小比尺模型爆炸试验和相应的动力数值计算分析相结合的方法进行研究。
In this subject, the similar material model in small scale is used for the anti-explosion test, which is combined with the corresponding dynamic value calculation analyses.
采用数值分析与模型实验相结合的方法，对水轮机导水部件双列环列叶栅流场进行了分析研究。
The flow field of double-row annular cascades of hydraulic turbines is studied by means of digital analysis in combination with model tests.
本文采用理论分析、数值模拟与实验相结合的方法对合成射流流动机理及推力向量控制中的应用进行研究。
In this paper, the flow mechanism and the applications of thrust vectoring using synthetic jet are studied in theory, numerical simulation and experiment.
计算结果表明，对周期性变化的传热过程，采用这种数值分析方法是适宜的。
The result shows that the numerical analysis method used in our study is suitable for the periodic heat transfer process.
研究主要采用的是有限元数值分析的方法。
The research in this paper adopts the finite element numerical analysis method.
本文分别采用数值方法和解析方法，分析周期性电抗加载多层介质结构的电磁散射特性。
In this dissertation, both numerical method and analytical method are applied to analyze the EM scattering characteristics of periodically reactance-loaded multilayer dielectric structures.
本文介绍了目前地下工程结构设计采用的计算模型及相关的数值分析方法，并对各计算方法进行了评价。
This paper introduces the present method of numerical analysis and design model for structure calculation in underground construction. Then, these calculative methods were evaluated.
采用数值计算方法分析了高能激光在光束控制器内部传输所产生的热效应及其对激光远场光斑的影响。
The thermal effect of high-energy laser produced within the beam controller and its influence on laser far-field spot are analyzed with numerical calculation method.
采用非线性全过程数值分析方法，计算了钢筋混凝土不等肢T形、L形和十字形柱截面模型在多种工况下的截面曲率延性比。
The cross- section curvature ductility ratio for R. C inequiaxial T - shaped, L - shaped and cress - shaped columns is calculated by numerical method.
本文采用理论分析和数值仿真方法对大长径比固体火箭发动机点火瞬态过程进行了系统研究。
This dissertation integrates theoretical analysis and numerical simulation method to investigate the ignition transient process of large aspect ratio solid rocket motors.
采用数值方法，分析了不同生物传热模型条件下，采用热敏电阻探头加热时，生物组织中温度响应的动态特征。
The tissue temperature responses generated from heating by a spherical thermistor probe were calculated by using a numerical method, in which different bio-heat transfer models were adopted.
本文以涡流管内可压缩气体三维强旋转湍流流场为研究对象，采用数学分析和数值模拟方法对涡流管内流场结构进行研究。
This paper does research on the three dimensional turbulent flow fields of compressible air with highly rotation, using methods of mathematical analyze and CFD simulation.
这种方法采用数值方法分析结构和地基的应力和应变，通过应力场和应变场来评价其稳定性。
It's employs numerical method to analyze stresses and strain of structure and its foundation. Its evaluate stability according to stress and strain field.
采用的数值计算模型和方法适用于分析中心进气式固冲发动机反应流场。
Numerical calculation model and method are applicable to analyzing reacting flow field of the solid rocket ramjet with central air-inlet mode.
采用有限差分数值分析方法，应用温度逐次更新处理技术对不同扰流孔下的椭圆管矩形翅片的肋效率进行计算。
The FDM numerical analytic method is applied to calculate the fin efficiency of elliptic tube with rectangular fins on which the disturbing holes were dug by using additional source term technique.
采用实验研究和数值模拟的方法，分析了工件预加工孔径和孔型参数对厚壁筒体翻孔工艺的影响。
Influence of the workpieces pre-hole diameters and passes on thick-wall cylinders hole flanging is investigated by experiment and numerical simulation.
最后，采用数值模拟的方法分析了新建隧道的施工对邻近建筑物的时间相关性影响。
Finally, the time dependence influence of the new tunnel's construction to adjacent building was analyzed by numerical simulation method.
采用有限元数值模型与实验模态分析相结合的方法，寻求动力安全设计的基本方法。
Using the synthetic method of both finite element and modal analysis searches after a basic way of dynamic Safety design.
同时，采用数值模拟和有限元分析的方法获得了成形过程的力能参数和相关的场量信息。
Simultaneously, the forming process of claw-pole was studied with numerical simulation and FEA method, property parameters and relative field information during the forming process were also obtained.
数值分析时采用粘弹性材料等效处理方法模拟电流变材料，计算得到的结构振动特性与实验结果吻合较好。
By means of simulating er material with equivalent viscoelastic material, the numerical results of the structural characteristics match well with the experimental results.
采用模型实验结合数值模拟的方法分析了薄板坯连铸结晶器的电磁制动过程。
Electromagnetic braking on flow field of molten steel in the thin-slab continuous casting mold is analyzed by mathematical modeling and experiment.
适用于MATLAB的数值方法用来解动力分析采用的差分方程。
Numerical methods available in MATLAB for solving the ordinary differential equations are employed for the dynamic analysis.
采用理论推导，结合数值模拟的方法，分析了梯形成形算法的基本结构、幅频特性以及弹道亏损。
The basic structure, amplitude frequency response characteristics and ballistic deficit effect of the algorithm were studied with both theoretical analysis and computer simulation methods.
采用数值模拟方法分析了不同工艺因素对RH精炼中夹杂物去除过程的影响。
The numerical method was employed to study the effect of technological factors on the inclusion removal in RH degasser.
本文采用有限元数值分析方法计算多层圆管的温度场，并把解析解与有限元相结合，提出一种求解其热应力的计算方法。
This paper used the finite element method to compute the temperature field, and combined finite element with analytic solution to develop a calculation of thermal stresses.
应用推荐