本文旨在探讨三聚氰胺对聚苯硫醚树脂的交联机理。
This paper approaches the effect of melamine on the cross-linking mechanism of polyphenylene sulfide resin.
可固化的组合物包含官能化的聚亚芳基醚树脂、丙烯酰基单体和磷阻燃剂。
A curable composition includes a functionalized poly (arylene ether) resin, an acryloyl monomer, and a phosphorus flame retardant.
采用氯醚树脂为基料，复合导电石墨、溶剂和助剂所制备的导电涂料，体积电阻率可达0。
The title conductive coatings based on chlorinated polyether resin as binder and mixed with compound conductive graphite, solvents and additives shows its volume resistivity 0.
研究了由二丙二醇单烯丙基醚制得的不饱和聚酯树脂的风干性能。
The air drying property of unsaturated polyester resin prepared from dipropylene glycol monoallyl ether was studied.
研究了苯磺酸型树脂催化的异戊烯和甲醇的醚化，考查了温度、醇烯比和空速对反应的影响。
The etherification of isoamylenes and methanol to form tert all methyl ether (TAME) by benz-sulfonic acid cation exchange resin as catalyst, was studied.
本文研究了磺酸化的聚苯乙烯树脂在酯化、酯交换、缩醛或缩酮的合成、醚的合成及(口片)呐重排反应中的应用。
This paper reports the study on the sulfonated polystyrene resin used in esterification, transesterification, synthesis of acetals or ketals, synthesis of ether and rearrangement reaction of pinacol.
本文合成了烯丙基醚化酚醛树脂，并与双马来酰亚胺共聚，通过FTIR和DTA进行了性能表征。
Allyl ether phenolic resin was synthesised, then it was copolymerized with bismaleimide. Its properties were characterized by FTIR and DTA.
研究了两种增塑剂对氯乙烯-乙烯异丁基醚共聚物树脂涂层力学性能的影响。
The influence of two kinds of plasticizers on the mechanical properties of the vinyl chloride-vinyl isobutyl ether copolymer resin coating has been investigated.
合成了以羟基封端的脂肪族聚碳酸酯-聚乙基醚碳酸酯二醇（PEECD），并用于环氧（EP）树脂的增韧。
One kind of hydroxyl - terminated aliphatic polycarbonate, i. e. poly(ethylene ether carbonate) diol(PEECD) was synthesized and used to toughen epoxy resin (EP) .
本文在实验室条件下分别以JSH-01、JSH-02树脂为催化剂摸索出醇烯法合成异丙醚的适宜反应条件。
Through experiments, the optimal conditions of reaction using JSH-01 and JSH-02 resin catalysts were gained, respectively.
以催化裂化轻汽油为原料对开发的RZE 3沸石型醚化催化剂的反应性能进行了研究，并与树脂型催化剂进行对比。
Reaction properties of RZE-3 zeolite catalyst for etherification of FCC light gasoline were studied in comparison with resin catalysts.
本文首次报道一种新的高分子固载季铵树脂的合成及其在水解、成醚反应中的应用，此树脂是一种有效的三相催化剂。
This paper first reports the synthesis and applications in hydrolysis and etherification of a new polymer supported quaternary ammonium resin, which is an effective triphase catalyst.
催化裂化轻汽油醚化工艺适应了生产清洁汽油的要求，轻汽油中含有的少量碱性氮化物中和阳离子交换树脂催化剂的酸性，造成催化剂失活。
The etherification process of FCC light gasoline meets the requirement of producing clean gasoline, while the basic nitrogen compounds can deactivate the etherification catalyst-sulfonic acid resin.
本文探讨了异丁醇醚化三聚氰胺树脂的工艺条件，并列举了异丁醇醚化三聚氰胺树脂漆膜性能。
This paper discussed the manufacturing process of isobutanol etherified melamine and the performance of the paint film based on the title resin.
醚化过程中树脂催化剂低温时活性选择性好，但耐热性能不好；
Under low temperature, the activity and selectivity of resin are excellent, but stability is a little bad;
用一缩二丙二醇单烯丙基醚所制备的不饱和聚酯树脂的气干性能，并对有关影响因素作了研究。
The air drying property of unsaturated polyester resin prepared from dipropylene glycol monoallyl ether was studied, the related influential effects were discussed.
实验表明，催化剂用量、反应温度和环氧树脂的种类对环氧醚的性能有较大的影响。
The experiment showed the the mass of catalyst , the temperature and the type of epoxy resin affected properties of epoxy ether resin.
催化裂化汽油醚化工艺是使汽油中异构烯烃与甲醇，在树脂型催化剂作用下醚化生成甲基叔烷基醚类，使汽油辛烷值提高。
The etherification process for FCC gasoline is to react methanol with the isoolefines in FCC gasoline to form methyl tert-alkyl ethers on a resin type catalyst, so as to enhance the octane number.
结果表明热固性酚醛树脂的固化过程，首先是羟甲基发生缩合反应，缩合反应形成醚键是主要的。
It was shown that the curing process of resoles, at first, proceeded by condensation reaction of methylol groups, and the formation of dimethylene ether linkage was predominant.
用国产NKC-29型强酸性阳离子交换树脂为催化剂，在常压液相条件下用乙醇和叔戊醇为原料合成了乙基叔戊基醚。
Ethanol and tert-amyl alcohol were employed to synthesize tert-amyl ethyl ether in the liquid phase at atmospheric pressure. The strong acid cation exchange resin, NKC-29, was used as catalyst.
采用异丁醇醚化三聚氰胺树脂，可开辟原料来源和降低产品成本。
The use of isobutanol etherified melamine has widened the source of raw material and reduced the cost.
采用苯甲酸改性的醇酸树脂和混合醚化的三聚氰胺甲醛树脂为基料，配以适量的锤纹助剂制成高固体分低温快干型氨基锤纹漆。
The high-solid fast drying amino hammer paint is prepared with benzoic acid modified alkyd resin and etherified melamine-formaldehyde resin as binder, hammering agent and other components.
三聚氰胺、尿素与甲醛经羟甲基化、醚化反应，生成甲醚化六羟甲基三聚氰胺和甲醚化羟甲基脲复合树脂胶。
Melamine, urea and formaldehyde underwent hydroxymethylation and etherification to yield a composed resin glue of methyl-etherified hexahydroxy methylmelamine and methyl-etherified hydroxymethylurea.
目的：研究大孔吸附树脂分离纯化川西獐牙菜中环烯醚萜苷类和酮类成分的工艺。
Objective:To study the separation and purification technology of secoiridoid glycosides and xanthones from Swertia mussotii Franch.
含有缩水甘油醚基团的烷氧基硅烷的部分缩合物，硅烷改性树脂，它们的组合物和制备它们的方法。
Glycidyl ether group-contg. partial alkoxysilane condensate, silane-modified resin, compsns. of these, and processes for producing these.
研究了在高纯聚苯硫醚(PPS)树脂合成中，水量的变化对产品质量的影响。
The influence of water content on the quality of the product in the synthesis of Poly (phenylene sulfide) (PPS) with high purity was studied.
丙烯酸松香与乙二醇二缩水甘油醚酯化合成环氧树脂预聚体。
Prepolymer from acrylic acid rosin and ethylene diglycidyl ether was prepared by esterification between acrylic acid rosin and ethylene diglycidyl ether.
结果表明酚醛树脂的热稳定性与二亚甲基醚键的存在很有关系，随着醚键的增多而热稳定性降低。
The results indicated that the thermal stability of phenol-formaldehyde resin was related to the presence of dimethylene ether linkage. The thermal stability decreased as the ether linkage increased.
论述了以烯丙基(缩水)甘油醚改善不饱和聚酯树脂的气干性，确定了气干性单体的最佳用量及树脂的稳定性酸值。
The airdry ability of unsaturated polyester may be improved by using glycidyl allyl ether. The optimum amount of airdry monomer to be used, the stability and acid value of the resin are determined.
一种含磷酸酯叔氟水分散体树脂，按树脂的单体总重量计，其包括：1） 30.0％的乙二醇独丁醚；
A phosphate ester tert-fluorine water dispersion resin(resin monomer total weight% )comprises:1)30.0% ethylene glycol monobutyl ether;
应用推荐