一进气压力,双缸端口提供的压力,双作用气缸或执行器和一个或多个渠道从排气汽缸压力。
One pressure inlet, two cylinder ports providing pressure to the double acting cylinder or actuator and one or two outlets to exhaust pressure from the cylinders.
这个问题是加剧了少量的空气泄漏进入气缸的进气阀旋转。
This problem is made worse by the small amount of air that leaks into the cylinders around the rotary intake valve.
在二行程发动机中,活塞起到阀门的作用,当活塞接近下止点时,使气缸壁上的进排气口打开。
In the two-cycle engine, the piston ACTS as a valve, clearing valve ports in the cylinder wall as it nears BDC.
从气动系统设计的原理着手,分析气缸缸径的计算方法及进(排)气回路中气动元件的选型依据;
Firstly, based on the theory of pneumatic system design, the arithmetic of cylinder's diameter and the basis of components selection in charging (discharging) circuit are analyzed.
研究发现,在进气过程的初始阶段,缸内始终存在一对旋涡,并且沿气缸轴线向下缸内流体出现逐步融合的趋势;
The results show that there are a couple of vortexes trending blend along the axes in the cylinder at the initial phase of intake process.
在摄入或中风入院,活塞动作,作为燃料和空气中可燃负责向下是进入气缸通过公开承认,进气阀。
During the intake or admission stroke, the piston moves downward as a charge of combustible fuel and air is admitted into the cylinder through the open intake valve.
当活塞到达进气行程的下止点时,随着空气燃油的混合气进入气缸,进气门关闭。
When the piston reaches the bottom of the intake stroke, the intake valve closes, trapping the air-fuel mixture in the cylinder.
本实用新型涉及一种加工机械用增压缸,特别是关于串联气缸的进排气及吹气装置。
The utility model relates to a pressurizing cylinder used for processing machines, particularly an air entering and expelling and blowing device for air cylinders connected in series.
对新的柴油机在气缸盖侧壁、中隔板、进排气道以及气门方面的改进进行了介绍。
The improvements of new diesel engines in terms of cylinder head side walls, middle walls, inlet and exhaust passages and valves were presented.
采用穗流试验的方法测定492汽油机进排气系统的阻力(包括进排气管和气缸盖进排气道)。
The inlet and exhaust systems (including inlet and exhaust manifolds and ports of cylinder head) resistance of model 492 gasoline engine have been measured by the steady flow tests.
研究认为,柴油机气缸盖进、排气道脉纹的产生主要是由硅砂高温发生相变膨胀导致砂芯开裂引起的。
Research has believed that veining in admission and exhaust passage of diesel engine cylinder head may mainly be caused by crack of sand core occurring in high temperature phase change expansion.
这种串联气缸的进排气及吹气装置,它结构简单,重量轻。
The air entering and expelling and blowing device for air cylinders connected in series has the advantages of simple structure and light weight.
一进气压力,双缸端口提供双作用气缸压力或驱动器,和一个或多个渠道从排气汽缸压力。
One pressure inlet, two cylinder ports providing pressure to double acting cylinder or actuator, and one or two outlets to exhaust pressure from the cylinders.
利用排气管温度加热汽化乙醇并通过进气管道供入气缸,与原机进行了性能对比试验。
Diesel engine, which was mixed with ethanol boiled by the preheated exhaust gas pipe and supplied into cylinder via air intake, was compared with the engine fueled only with diesel in this paper.
建立进排气阀模型以确定配气相位; 建立气缸内湍流燃烧、传热、气体流动模型;
The models of combustion, heat transfer and air-flow were established and the model of mechanical efficiency was established as there are frictions between engine parts.
采用进口西门子电机气缸进给合油压稳速器减速、稳速、进倒平稳。
Adopt the entrance Siemens electric motor air cylinder to move forward to closing the steady fast oil pressure implement reducing the speed, stabilizing speed, moving forward upside down stable.
应用动网格技术,对某柴油机在进气和压缩过程中气道-气门-气缸内的瞬态流场进行了数值模拟。
Dynamic simulation is carried out to study the transient intake and in-cylinder flow generated during intakecompression processes using CFD code Fire.
进气管(40)连接在气缸盖(20)的上表面和空气滤清器(22)的上表面之间。
An intake pipe (40) connects between the upper surface of the cylinder head (20) and an upper surface of the air cleaner (22).
从事汽车进气歧管、气缸罩盖设计经验五年以上;
At least 5 years experience on intake manifold and cylinder cover; 4.
设计独特的进气控制系统,伺服气缸调节进气量从0~100%,是节省能源的有效措施。
The uniquely designed intel control system has a servo cylinder that can regulate the inlet volume between 0~100% and is an effective way to save energy.
进气冲程在活塞位与气缸顶部(进气门开启,排气门关闭)时开始,在活塞到达其行程的底部时结束。
The intake stroke starts with the pistonat the top of the cylinder (intake valve open and exhaust valve closed) and stops with the pistonat the bottom of its travel.
进气冲程在活塞位与气缸顶部(进气门开启,排气门关闭)时开始,在活塞到达其行程的底部时结束。
The intake stroke starts with the pistonat the top of the cylinder (intake valve open and exhaust valve closed) and stops with the pistonat the bottom of its travel.
应用推荐