管道极限压力的确定能为管道设计提供优化参数和安全运行保障，节约建设成本，降低危险系数。
Limit pressure can provide pipeline design parameters and the guarantee of safely operating, thus saving the construction cost and reducing danger of burst accidents.
我们相信，更加重视在卫生服务设计中一个经常被忽视的参数(病人负荷和流量)%将加速实现可靠，安全，高效的护理。
We believe that greater attention to a frequently overlooked parameter in health service design-patient load and flow - would accelerate progress toward reliable, safe, efficient care.
岩土工程勘察的目的是为设计、施工提供地质勘察成果及各项岩土工程参数，其成果质量将直接影响建设项目的工程安全和工程造价。
The aim of geotechnical survey is to provide survey results of geology for engineering design and construction, and the quality of survey result influence project′s safety and cost directly.
在结构设计时，TAT的数据接力、参数合理选取和输出信息的正确分析、判断，是保证工程结构设计安全的关键。
In structure design, data relay, parameters selection of TAT and the correct analysis of output information, so guarantee the security of the project structure design.
走马岭隧道岩体结构特征和围岩稳定性研究，为优化设计参数，提高施工质量提供理论指导，对保证施工安全以及优化设计具有重要工程实践意义。
Study on the characters of rock mass condition and the stability of surrounding rock has great practical significance to optimize design parameter and to advance construction quality.
卖方的设备设计、技术参数、安全措施和标准应满足中国有关规定和要求。
The design of the switchgear, technical data, safety measurement should be applicable in China.
文中还介绍了爆破参数的选择、切口尺寸的确定、安全措施等，并总结了设计和施工中的经验。
In addition, the selection of blasting parameters, the determination of blasting cut size, safety precautions and the others are introduced, and some experience from the design...
通过正确地选择波纹管制作材料和结构、合理设计波形参数和疲劳寿命、保证安装质量等措施，可提高波纹管补偿器的安全可靠性。
This paper sates that selecting bellows material correctly, designing waveform parameter and fatigue life, ensuring installation quality can improve the safety and reliability of bellows compensator.
文中介绍了爆高和爆破参数的选择、预处理、起爆破网路设计和安全防护措施。
In this paper, selection of blasting cut height and parameters, pre-treatment, design of priming circuit and safety precaution measures were introduced.
本文给出了一种基于消息驱动的智能小区门警控制系统设计，该系统解决了输入参数复杂、实时性和安全要求高的矛盾。
This paper introduces an intelligent district gate guard control system based on message drive. This system has resolved the problems of complex input parameters, high real-time and security demands.
通过柔性阀瓣与刚性阀瓣各项性能参数的对比研究，对安全阀阀瓣的改造和设计具有重要的意义。
The research on comparing the performance parameters of flexible disc and rigid disc is of great significance for the reconstruction and design of safety valve disc.
性能化消防设计方法是运用消防安全工程学的原理和方法对火灾本身规律进行分析，并找出相关的设计参数的方法。
The performance based approach is applied the principle and method to analyze the development of fire, and it can find out the relation parameters to design the fire safety system.
介绍了孔间、孔内和孔间微差爆破的原理、参数、设计施工要点及在降低爆破震动、保护平硐溜井使用安全方面的应用结果。
The results of shot-delay blasting application in aspects of decreasingblasting-shake and ensuring safety of tunnel &drop shaft are discussed.
岩体特性研究是工程设计和研究的前提和基础，岩体力学参数取值合理与否，直接关系到工程的安全性和经济性。
Study on rock features is premise and basis for mining project design and research. Selection of rational mechanical parameters of rock is very important for safety and economy of engineering.
线路平纵断面设计参数直接影响到线路等级以及行车的安全性和舒适性。
The plane and vertical section design parameters of railway line directly affect the line grade and the running safety and comfortableness.
在确保安全的基础上，选取合理的矿块结构参数，对矿山设计和建设尤为重要。
On the basis of safety production, selecting appropriate parameters of ore block structure is particularly important for the design and construction of the mine.
试验求得的方程和参数对岩石基础工程的设计和运行安全评估具有实际应用价值。
The test parameters and the equations acquired form this test would have practical value for the assessment of the design and safe operation in the rocks base engineering.
随后对填土性质参数进行了敏感性分析，并运用该法对挡土墙结构进行了深层抗滑稳定安全验算，可为重力式挡土墙结构安全设计提供可靠依据和技术支撑。
Then the effect of different soil parameter on the stability of gravity retaining wall is analyzed in this paper. Finally an example of the deep sliding stability of integral construction is given.
本文简述了余度技术中的模型监控，介绍了籍助于模拟技术确定模型监控中各参数的方法，所得的参数——安全门限值和延迟电路的时间常数可作设计比较器的依据。
This paper gives an explicit description of the model monitoring in redundance technique It brings forth a method of determining parameters in model monitoring by using simulation technique.
本文简述了余度技术中的模型监控，介绍了籍助于模拟技术确定模型监控中各参数的方法，所得的参数——安全门限值和延迟电路的时间常数可作设计比较器的依据。
This paper gives an explicit description of the model monitoring in redundance technique It brings forth a method of determining parameters in model monitoring by using simulation technique.
应用推荐