工程实例的计算表明，计算结果反映了水电站厂房的实际工作状态。
The calculation of project example indicates that the rate and the precision of calculation is satisfactory, the calculation result reflects the actual working state of powerhouse.
在IEEE - 14测试系统的计算结果表明，算法反映了安全因素和经济因素的关系，有助于建立电力市场中合理的用户电价体系。
Numerical result from IEEE-14 test system shows that the presented algorithm reflects the relationship of security and economy and is helpful to construct reasonable pricing system in power market.
将各甲板结构离散成板梁组合结构模型能真实的反映实际结构的特点，固有特性的计算结果更准确。
It can well reflect the characteristic of the structure to disperse deck structure to stiffened plates model, and the calculate result of the inherent specialty will be close to the real.
计算结果表明，大跨度桥梁结构的动力分析必须建立详尽的分析模型，以反映结构的实际动力特性。
The results show that long-span continuous rigid frame bridges should be modeled as precisely as possible to reflect their actual dynamic characteristics.
求解过程中各参数的设置合理，可以较好地反映尾水管中的主要流动现象，同时也说明了流场计算结果的正确性。
Defined parameters were appropriate, which can reflect main flow in draft tube. It also instructed that the calculation was correct.
计算结果表明采用有限差分数值方法能较好地预测多组分动态穿透曲线，同时能较好地反映多组分气体的竞争吸附特性。
The results show that the finite difference method can preferably predict break through curves of multicomponent competitive adsorption systems, and reflect the adsorption characteristics.
稳定性计算结果，客观反映了边坡实际状态，可以为边坡的加固处理提供依据。
The stability_calculated results reflect the real state of a slope, which can be used as the basis of the slope reinforced.
这种计算模型不能真实地反映弹条安装过程中的受力情况，导致计算结果偏差很大。
But this calculation model in fact does not specify the force condition of the elastic bar, which leads to great deviation.
在受激喇曼散射、波长与透射率关系方面反映了我们的初步计算结果。
In the SRS and the transmissivity for various wavelengthes, some computational results are given.
货物 体积重量是一种反映了包裹密度的计算结果。
The volumetric weight of a shipment is a calculation that reflects the density of a package.
同时，采用模拟与实测两种不平顺样本的计算结果表明，本文采用功率谱密度函数的模拟方法可以基本反映轨道的实际不平顺情况。
The calculation results using simulated and measured irregularity indicate that the power spectral density function and the simulated method used here can reflect true condition of rail.
计算结果较好地反映了竖井周围岩体不稳定关键块在爆破振动作用下沿断层破坏、崩落的动力学过程。
The result of blasting simulation clearly shows the movement of the silo is due to the unsteadiness jointing rock mass under applied blasting vibration load.
文中给出了数据融合算法，并提出把数据融合方法应用于火电机组的在线性能计算中，使计算结果能更完善、准确地反映机组的运行状况。
A new data fusion method for on-line performance calculation of turbo-generator is presented in this paper and the data fusion algorithm is put forward.
千岛湖区NDVI等级斑块的景观指数计算结果较好地反映了其上分布植物群落状态。
The results of landscape index of NDVI patch grades in Thousand Island Lake area reflect the status of the plant communities on them well.
示例计算结果表明，确定系统的增量增益不但可以方便地判断饱和非线性系统的稳定性，而且在一定程度上也反映了系统的鲁棒性。
And the results show that the nonlinear system incremental-gain can be, in some degree, used not only to judge system stability but also to reflect system's robust.
分析结果表明，模拟计算结果与实际生产零件的成型状态基本吻合，可反映零件的成型规律。
The results show that the simulation result is consistent with the actual part's molding state.
同时，计算结果直观反映了聚合物驱重要的“油墙”形成机理。
Also, the important polymer flooding mechanism "oil block" is illustrated in the results of calculation.
模型试验表明本方法可以比较准确地反映这种窄缝挑坎的水力特性，试验结果与计算结果基本一致。
Hydraulic model tests have showed that the devised method describes the hydraulic characteristics of the bucket well, and the computational results agree with those measured.
计算结果正确反映了此类结构的受力特点并与设计初衷相符合。
The static analysis results accorded with the design original intention and reflected the mechanical quality.
计算结果表明：在断裂损伤数值计算中考虑锚杆对裂隙的增韧止裂作用可以更好地反映锚杆的加固效果。
The results show that considering the effect of fracture toughness increment and retardation of crack of anchorage, better effect of anchorage is reflected in numerical fracture and damage simulation.
计算结果表明所选的湍流模型能够很好的反映离心风机气固两相流的情况。
The computational predictions of the centrifugal fan flow indicated that the turbulence model under-predicted gas-solid two-phase flows.
数值计算结果表明，利用本文提出的方法计算台风涌浪能够很好地反映涌浪传播的物理特征，并具有一定的实用价值。
The results of computation show that the method could describe the main characteristics of swell propagation, and may be used in operation.
应用边界点元可以更客观地反映角点处边界量的实际状况，从而大大改善了计算结果的精度。
Using boundary point elements can simulate the actual situation of boundary quantities more objectively and improve the accurate of results greatly.
计算结果表明，用分段回归方法计算孔隙结构的分形维数能更好地反映孔隙结构的实际情况。
The results obtained by the subsection regression method can really reflect the pore structure in reservoir.
模型的计算结果与实验结果对比，表明该模型可以反映轮胎非线性侧偏特性，可以用于汽车操纵动力学研究。
The non-linear non-steady lateral force and aligning moment are compared with test data, showing the feasibility of application for the studies of vehicle dynamics.
计算结果表明，用常规的有限元计算模型、计算参数和计算方法，在量化的数值上与试验结果有较大差异，计算结果还不能完全反映工程的实际情况。
The results show that using the routine numerical model, parameters and the computational method, the results are different from the test, cannot reflect the engineering practice completely.
进而采用电算法求出砌块的热阻，使得计算结果能精确地反映墙体砌块的热工性能。
Moreover, with simulation circuit method the thermal resistance of block is formulated, which can accurately state the thermal characteristics of building blocks.
计算结果符合企业实践，较好地反映了模型的可行性和鲁棒性。
Computational results are in line with the industrial practice, which verifies the feasibility and robustness of the models.
计算结果符合企业实践，较好地反映了模型的可行性和鲁棒性。
Computational results are in line with the industrial practice, which verifies the feasibility and robustness of the models.
应用推荐