其它蒸发材料将简单加以讨论。
水和自然的解决方案创建一个模式中的半导体材料作为水的蒸发浓度。
The water and solution naturally create a concentration of semiconducting material in the pattern as the water evaporates.
泡沫材料可以使液体燃料流经油管，减少由于凝结和蒸发造成的汽油损失。
The foam allows the liquid fuel to pass through the gas lines, and conserves gasoline lost due to condensation and evaporation.
一个真空干燥通常用于分离其他潮湿的材料一挥发性液体的蒸发从粉，蛋糕，浆，或。
A vacuum dryer is typically used for separating a volatile liquid by vaporization from a powder, cake, slurry, or other moist material.
因而钻石化学蒸发沉淀的应用受到材料限制，要求材料在此温度下不软化例如硬质合金。
Thus, the application of diamond CVD is limited to materials which will not soften at this temperature such as cemented carbides.
可光调的贴片电容由多层的金属电容组成，用激光蒸发掉顶层的材料而减少电级面积从而使减少电容的容量。
Trimmable chip capacitors are build up as multilayer plate capacitors. Vaporizing the top layer with a laser decreases the capacitance by reducing the area of the top electrode.
针对有机半导体材料的蒸发温度低的特点，设计并制作了低温辐射式加热器和衬底加热器。
A low-temperature radiation heater and substrate heater are designed and made aiming at the low evaporating temperature of organic semiconductor materials.
当金属浇入时，泡沫材料蒸发，金属取代其位置。
As the metal is poured, the foam vaporizes, and the metal takes its place.
以高纯度大豆卵磷脂为包封材料，用反相蒸发法制备出果酸脂质体。
The alpha hydroxy acid containing liposome was made by reverse phase evaporation method with high purity soya lecithin as synthetic material.
这产生使烧蚀装置(50)的材料蒸发的等离子弧。
This generates a plasma arc that evaporates material from the ablative device (50).
以大豆卵磷脂为包封材料，用反相蒸发法制备脂质体，同时用不同浓度的聚乙烯醇（PVA）进行包覆。
The liposome was made by reverse-phase evaporation method from soya lecithin and coated with different concentration of polyvinyl alcohol (PVA).
热蒸发工艺也能在喷气发动机零件上覆盖很厚（1mm）的耐热材料涂层，例如MCrAIY—一种金属、铬、铝和钇合金。
The thermal evaporation process can also coat a very thick, 1mm, layer of heat-resistant materials, such as MCrAIY—a metal, chromium, aluminum, and yttrium alloys, on jet engine parts.
这是一种管壳式换热器，可用于蒸发、加热、冷凝、冷却等工艺，由介质的物理、化学和腐蚀等性能来选择适宜的材料制作。
It is of pipe type used for evaporation, heating, condensing, cooling operations, Materials for this unit are optional as per the physical, chemical and corrosive properties.
吸收式制冷机主要由四个交换设备组成，即发生器、冷凝器、蒸发器和吸收器，外墙保温材料它们组成两个循环环路：制冷剂循环与吸收剂循环。
Absorption chiller mainly by the four exchange equipment composition, namely generator, condenser, evaporator and absorber, they formed two cycle loop: refrigerants circulation and absorber cycle.
熔融性比较差的镀膜材料在蒸发过程中以直接气化为主，挖坑效应比较明显。
Materials without good melting property will not be melted and digging effect will exhibit evidently when electronic beam irradiating on it.
非织造材料是农业上用作覆盖物的一种重要材料，水分经这一材料蒸发时，涉及到复杂的热质同时传递现象。
Nonwoven material is one of important covers in agricultural application. Evaporation of water through the material involves mechanism of complex thermo-mass transport.
非织造纤维材料是农业上用作覆盖物的一种重要材料，水分经这一材料蒸发时，涉及到复杂的热质同时传递现象。
Nonwoven material is one of important covers in agricultural appli cation. Evaporation of water through the material involves mechanism of complex thermo-mass transport.
正常使用时本产品不会侵蚀任何材料，蒸发快速且不留任何残渣。
The product does not attack any material in common use, and evaporates quickly without leaving any residue.
正常使用下，SPRAYWASH不会侵蚀任何材料，并可以在瞬间完全蒸发，且不留任何残渣。
SPRAYWASH does not attack any material in common use, and evaporates completely after a short time without leaving any residue.
实验结果表明利用我们设计的扫描控制器，通过改变扫描形状设计参数，可以对上述材料获得均匀的蒸发和良好的预熔。
The sweeping experimental results show that using the designed sweep controller can make good performance on evaporation and pre-melting for the above materials.
通过在希拉穆仁草原典型地带进行不同材料覆盖的土壤蒸发实验，并以恢复生态学为指导思想，研究了不同材料覆盖对土壤水分的影响。
With restoration ecology as a guide, a soil evaporation experiment was conducted to analyze the effects of different material covers on soil moisture in the typical steppe zone.
我们提供与标准蒸发许多材料在产量，工艺稳定，性能和光学性能的优势。
We offer many advantages in yield, process stability, and optical performance compared with standard evaporation materials.
蒸发速率取决于材料及诸如温度、发面积、风量和施加在此蒸发面上的压力等因素。
The rate of evaporation depends on the material and such factors as the temperature, the surface area, amount of ventilation, and the pressure exerted on the surface.
本文讨论了渗透蒸发多层复合膜的膜材料的选择及其制作方法，并对渗透蒸发膜的发展趋势作了予测。
The selection and preparation of pervaporation multi-layer composite membrane are discussed in this paper, and the prediction of the development of the pervaporation membrane is made.
当火床的热量散发出来，这些水份就会蒸发出来，因为这个原因，把垫身的材料烘干再用就最好了。
When heat from the coals rises up through this, a sauna of sorts is made. For this reason the dryer the insulating materials the better.
物理蒸发沉淀涂层涉及到在真空装置内各种各样的材料原子紧靠原子、分子紧靠分子或离子沉淀于固态基体上。
PVD coatings involve atom-by-atom, molecule-by-molecule, or ion deposition of various materials on solid substrates in vacuum systems.
本文提出了一种试验方法和计算途径，对几种非织造纤维材料在水分蒸发状态下，可获得其表面的传质系数和传热系数。
A method of test and calculation is proposed for mass and thermal migration coefficients on the surfaces of several nonwoven materials.
设计的扫描控制器为保证自动扫描材料时材料均匀的蒸发，考虑了材料蒸发时材料沉降过程对蒸发性能的影响。
For the purpose of even evaporation during auto-sweep, the influence of the depth of material surface in the crucible on the evaporation characteristic is considered.
本论文通过CVD、热蒸发等方法，制备了有序化自组装纳米硅丝阵列、不同直径纳米硅丝、纳米硅管等一维纳米材料。
In this paper, we synthesized some one-dimensional nano-materials including the silicon nanowires with orderly array, different diameters and silicon nanotubes via methods of CVD,.
针对有机半导体材料的蒸发温度低的特点，设计并制作了低温辐射式加热器。
Based on the low evaporation temperature of organic semiconductors, a radioactive heater-crucible assembly was developed for vacuum evaporation coating and sputtering coating systems.
应用推荐