本去核机设计为粘核和离核桃自动进料、去核，速度达每分钟320个。
It is expressly designed to automatically feed and align both freestone and clingstone peaches at a maximum rate of 320 fruits per minute.
负极集流体自动焊接机由自动进料器、进料盘、焊接盘与卸料系统等组成。
This automatic machine consisted of parts supplying feeder, feeding disk, welding disk and discharge disk.
配套系列龙门下料机自动进料，可一次完成进料、冲裁、退料等工作程序。
Equipped with series of gantry laying off machines automatic feeder to finish feeding, punching and cutting, material return, and other procedures at one time.
全自动进料结构，精度高，只要变换送料机构零件，各种规格均可进行加工。
It has automatic feeder with good precision. It is only to change the feeder parts, all kinds of specifications can be processed.
本文给出了自动进料系统中动态称重的基本原理，分析了称重中的主要干扰来源和特性。
The principle of dynamic weigh is given, and the source of noises and its characteristic in dynamic weigh is found out.
原料通过自动进料装置进入到下料管，下料管是透过分离器的侧面或中间进入到磨机内部的。
The raw material goes into the tremie pipe through the automatic feeder. The tremie pipe extends into the inside of the mill through the concentrator' s side or center.
可任意调节送料长度，具备自动进料计数功能，工效高、噪音低、体积小、重量轻、操作方便等特点。
Feeding can arbitrarily adjust the length of the counting function with automatic feed, higher efficiency. low noise, small size and light weight, easy to operate and so on.
设备基本结构：一、自动进料成型冲孔切断卸下机构。二、调直部份采用能：上、下、左、右调动保正滑轨质量标准，方便技术人员的调动。
Equipment basic structure: 1, automatic feed, forming, punching, cutting, unloading. 2, transfer straight over to the right part of the mobilization of slide quality standards.
CTR980全自动四测位测编一体机1。尺寸：宽×深×高： 1100×1100×1920毫米2。添料方式：料管自动进料3。测试位：4个并联金手指或测试座 4。视觉检查：字体、方向；
CTR 980 Fully auto quad sites test Reel handler 1. Dimension: width*depth*height: 1100*1100*1920(mm) 2. Material loading: tube auto loading 3. Test site: 4 in parallel finger or PTB(socket) 4.
粉碎机侧面进料，为充分发挥粉碎效率，应选用喂料量均匀、能自动控制的喂料器与之相配套。
Side feeding is adopted in order to give full play to grinding efficiency, should choose feeder which can feed evenly and automatic control to cooperate with.
GWF 410标准进料机导丝进给系统，导线可自动装卸，提供圆锥或桶式研磨，速率高达2.25秒交换时间。
The Accu-Feed GWF 410 Guidewire Feed System provides automatic handling of wires for taper or barrel grinding into centerless grinder at rates up to 2.25 seconds exchange time.
通过蒸发塔底泵和护进料泵两系统采用变频调速器的数据分析表明，它是提高白土精制装置自动化水平的有效途径。
Applying frequency governor to bottom pump of evaporation tower and feed pump of furnace, the result showed that it is the effective way to improve the automatic level in clay unit.
可换向进料导向机构和通过行程开关自动改变电机的转向，从而实现转子正反向工作，大大延长易损件的使用寿命；
Reversible rotor extends a much longer service life of wearing parts due to the reversible feed guiding mechanism and the automatic changing of motor rotation direction by dint of limited switches.
自动控制变频调速、调节进料、分级。可达320目，细度均匀；
Control frequency conversion and speed adjustment automatically, adjust feeding and grading. The fineness can reach 320 mesh which is even;
控制系统通过对钢材长度的实时检。计算钢材运动的减速、停车位置，完成加热炉上料系统的进料、停车、推钢等自动操作。
In the system, the position of deceleration and stop for the steels transport is calculated by the measuring of steels length. The process automation is accomplished.
大型松紧调节臂不断从进料加工过程中反向弯曲的材料速度与管张力通过计算机自动调整。
Large dancer arm keeps material from being reverse-bent during the feed process Speed and tube tension are auto-adjusted by computer.
能在全速运转下自动实现进料、分离、洗涤、脱水、排液、卸料、洗网 等工序。
This machine can feed, separate , wash, dewater, discharge, and wash screen repeatedly as it is running at a full speed.
能自动在不同转速下循环完成进料、分离、洗涤、卸料等工序，可实现远、近距离控制。
The machine can feed, separate, wash and discharge repeatedly at different rotating speeds. They can be controlled nearby or in the distance.
高速压力机工作时不用人工进料，而将原材料或半成品自动送进模具进行加工，具有高效自动、高精度的特点，因而得到了越来越广泛的应用。
High-speed presses work without artificial feeding, while raw materials or semi-automatically sent to die for processing, with high automatic, high-precision features, and have been more widely used.
可连续进料，切完的蔬果自动落到下方的食物箱内；
Continuous feed, cut product drops on the container by gravity. ;
并可配微电脑自动控制系统，能自动调节进料量和进汽量，使压制机始终处于最佳状态。
It can also be equipped with automatic system to automatically adjust the feed flow to keep the mill in an optimum operating condition.
并可配微电脑自动控制系统，能自动调节进料量和进汽量，使压制机始终处于最佳状态。
It can also be equipped with automatic system to automatically adjust the feed flow to keep the mill in an optimum operating condition.
应用推荐