本文对自动控制原理课程教学进行了探讨。
This paper develops discussions on the teaching for principle of automatic control course.
了解基本的工艺自动控制原理。熟悉dcs系统。
Know basic automatic process control theory. Familiar with DCS (Distributed control System).
《自动控制原理》是相关专业的一门重要专业基础课程。
Automatic Control Principle is an important basic course of correlative specialty.
自动控制原理是控制以及相关学科的一门重要的专业基础课程。
Theory of Automatic Control is an important basic specialty course in the subject of control.
探讨了《自动控制原理》课程的体系结构、内容组织和教学方法。
The architecture, content organization and teaching method for the course of automatic control principle are discussed.
应用自动控制原理来设计这种恒流源，可以获得必要的幅度稳定性。
The application of automatic control principle to the design of such a source makes the required amplitude stability possible.
介绍一种新的基于LABVIEW的《自动控制原理》CAI研究方法。
A novel CAI method for Control Theory based on LABVIE is discussed in this paper.
将虚拟仪器技术应用于高校实验室，实现了基于虚拟仪器的自动控制原理实验系统。
Virtual instrument technology is applied to the laboratory of university, and the experiment system of the principle of automatic control was implemented based on virtual instruments.
该课程的先行课是电路、模拟电子技术、数字电子技术、自动控制原理、电气测试技术。
Its advance courses are circuit theory, simulated electronic technology, digital electronic technology, and electrical testing technology.
本系统的建立和使用可以规范“自动控制原理”的教学考核环节，适应教学改革的要求。
The establishment and usage of this system standardize the teaching check of the automatic control principle courses and adapt demands of teaching reform.
“电路基础”、“信号与系统”和“自动控制原理”是我校电子专业的重要专业基础课。
Basic Circuit Theory ", "Signals and Systems" and "Automatic Control Principles" are important basic courses for electronics specialty in our university."
自动控制原理是学习自动控制技术的一门重要专业基础课程，实验教学是必不可少的环节。
The course of automation control principle is one of the most important basic courses, in which experiment teaching is very important part also.
球杆系统这样一个非线性不稳定系统是为自动控制原理等基础控制课程教学实验设计的实验设备。
Ball and beam system is a nonlinear and unstable system, which is designed for experiments of basic control curriculum such as feedback control.
应用自动控制原理对同步电动机晶闸管励磁系统进行扰动后的动态分析，提出了相应的性能指标。
Applying automatic control principle to analyze dynamic operating modes of in - Phase Electromotor Transistor Excitation System, we have brought out relevant characters.
本文介绍一种稳幅式双极性电流源，它是根据自动控制原理设计而成的，用于连续铸造熔渣的检测。
This paper introduces a stable amplitude bipolar current source. It was designed basing on the principle of automatic control. This circuit is suitable for continuous casting slag detection.
根据矢量控制理论和自动控制原理，建立了转子磁链定向的双馈异步电动机电流模型矢量控制系统。
Based on the theory of vector control and automatic control system, the vector control system of current model for doubly-fed asynchronous machine with field-oriented rotor was established.
介绍液压式径锻操作机旋转驱动的机械结构和液压结构，描述操作机旋转、旋转补偿以及旋转补偿同步的自动控制原理。
The article introduces the mechanical and hydraulic configuration of rotation drive system and describes the control concepts on the rotation, compensation and synchronization of the manipulator.
本文针对目前“自动控制原理”课程教学中存在的问题，探讨了将探究性教学方法应用于教学实践的必要性和实施步骤。
By probing into the exploratory chemistry teaching in junior middle school, this paper suggests the approach to exploratory teaching as well as the pattern of exploratory teaching.
电路理论系列课程、计算机技术系列课程、信息理论知识、信号与系统、数字信号处理、电磁场理论、自动控制原理、感测技术等；
Circuit theory courses, computer technology courses, information theory, signal and systems, digital signal processing, electromagnetic theory, control theory, sensor technology;
该软件是从自动控制原理教学实际出发，以MATLAB为平台，实现了线性系统分析、线性系统串联校正补偿器设计和PID参数整定。
Using MATLAB as a flat roof, this software implements linear-system analyses, linear-system corrector in series design and PID tuning.
通过对包钢给水厂澄清水处理系统的自动控制原理分析，论述了以原水流量为前馈、以SCD为反馈的自动优化投药系统的可行性和优越性。
It discusses the feasibility and advantages of the automatic optimization dosing system, which regards the original water flow as the feedforward and the SCD as the feedback.
因此，应用当前最先进的MCAI理论技术研制一个MCAI软件，以帮助大幅提高《自动控制原理》课程的教、学质量具有重大的现实意义。
So it is meaningful to develop a MCAI software utilize the most advanced theory and technique currently to improve the teaching and learning quality of automation principle course.
以自动控制原理(经典控制理论)和现代控制理论等为理论基础，加热炉控制采用了改进型双交叉限幅、模糊控制、脉冲控制和换向控制等最为常用的控制技术。
Based on classical control theory and modern control theory, many control philosophies such as modified DCL, fuzzy control, digital pulse and cycling regenerative time control have been developed.
介绍了磁力脱水槽自动控制装置的结构、工作原理和特点。
The structure, working mechanism and characteristics of the automatic control device of magnetic dewatering tank are described.
介绍了机电一体化新产品——多功能自动控制保健床的基本结构和工作原理。
This paper introduces the basic structure and the work principle of the multi-purpose auto-control health care bed.
本文介绍了高速物料提升机自动控制系统原理，软、硬件结构，并对系统的特色部分作了进一步的分析。
This paper introduces the principle, software and hardware structure of automatic control system for high -speed material hoist, and analysis feature of the system.
采用模糊控制原理，水分在线检测及终水自动控制系统。
Fuzzy control, on-line water monitoring and final dryness auto control system.
详细介绍一种新型皮带输送机张力自动控制装置的原理。
The principle of a new automatic equipment for belt conveyor tension controller is described.
详细介绍一种新型皮带输送机张力自动控制装置的原理。
The principle of a new automatic equipment for belt conveyor tension controller is described.
应用推荐