研究了稀土对低合金耐磨钢组织和性能的影响。
The effects of rare earths on properties and microstructure of low-alloy wear resistance steel were studied.
主要用于低碳钢、合金钢、不绣钢、耐磨钢及金属材料的焊接。
Mainly used in welding low carbon steel, alloy steel, stainless steel, wear-resisting steel and cast iron.
研究了新型碳化物贝氏体耐磨钢不同回火温度下的组织与力学性能。
The authors researched on the microstructure of a new non-carbide bainite abrasion resisting steel under the different tempering temperatures and its dynamic performance.
对所研制的高碳低合金耐磨钢的强韧化、耐磨性及磨损行为进行了研究。
Experiments were carried out upon the hardening and toughening, wear resistance and abrasive behaviour of the low alloyed high carbon wear resistant cast steel.
耐磨钢因其具有优良的抗磨损性能而被广泛地应用于工业生产的各个领域。
Wear-resistant steel, with good wear-resistant properties, is wide ly used in every field of Indus - trial production.
研制用于球磨机栅格板的低合金耐磨钢,它的韧性好,硬度和耐磨性较高。
A kind of low-alloyed wear resistant cast steel used for exit grill plates of ball mill is developed. It has good toughness, higher hardness and wear resistance.
这种低合金耐磨钢的合金加入量较少,成本低廉,具有明显的经济与社会效益。
Due to the few alloy addition and its low cost, this low-alloy wear-resistant steel has obvious economic and social benefit.
中国最大口径不锈、耐热、耐磨钢、高温、精密、耐蚀合金高压无缝管制造公司。
The largest diameter stainless, heat-resistant, wear-resistant steel, high temperature, precision, high-pressure corrosion resistant alloy seamless tubes manufacturing company.
概述了耐磨钢的主要技术要求、生产工艺以及国内外现状,并介绍了耐磨钢的研究进展。
This paper summarizes the main technical requirements, productive technologies and the present situation of wear-resistant steel and presents progress in wear-resistant steel research.
现在它已能生产高强度结构钢、弹簧钢、工具钢、可热处理钢、耐磨钢、硅钢和不锈钢。
It is currently used to produce high strength structural steel, spring steel, tool steel, heat treat steel, abrasion steel, silicon steel and stainless steel.
选用三种不同碳、铬含量的耐磨钢,通过热处理获得不同数量的二次碳化物和马氏体基体。
The effects of varying the amount of secondary carbide on the character of matrix under three-body abrasion of wear resistant steel have been investigated.
结果表明,在中、低冲击磨料磨损条件下,试验钢的耐磨性优于中碳低合金耐磨钢和高锰钢。
Under lower and medium impact energy, the abrasive wear resistant performance of the steel metioned is higher than that of low alloyed medium carbon wear resistant steel and high manganese cast steel.
在动载三体磨粒磨损条件下,试验研究了冲击载荷的变化对铸态复相耐磨钢动载磨粒磨损特性的影响。
The influence of varying impact energy on wear resistance of dual phase cast steel has been investigated under impact three body abrasion.
针对传统的高锰钢作为履带板材料在实际应用中的不足,试验采用了一种新型的铸造低合金高强度耐磨钢替代。
A kind of new low-alloy steel with strength was studied to overcome the deficiency of traditional high-manganese steel used in making creeper truck.
针对传统上高锰钢作为履带板材料在实际应用中的不足,研究了一种新型的铸造m - B低合金高强度耐磨钢。
A kind of new M-B low-alloy wear resistance steel with high strength has been studied to overcome the deficiency of traditional high-manganese steel used in making grippad.
作为合金元素加入钢中可使钢合金化,增加钢的强度、硬度、延展性、韧性和耐磨性等。
As an alloy element, silicon manganese can alloy the steel, strengthen the intensity, hardness, malleability toughness and wearability of the steel.
选择性使用和布局调质结构钢获得了极优的耐磨性和强度。
Selective use and placement of quench and tempered construction steels provide excellent wear and strength properties.
钢齿牙轮钻头增强了工作的平稳性,降低了牙齿的冲击载荷,使牙轮钻头的耐磨性能得到提高;
Steel tooth bit can increase the bit's stability and lower the tooth impact load, and enhance its wear resistance.
重型、铸造304或316不锈钢阀体具有很强的耐腐蚀耐磨损性能,能够经受最恶劣的液体泥浆和干燥物体介质的处理应用场合。
The heavy duty, cast 304, 316 stainless steel body provides corrosion and abrasion resistance on the toughest liquid slurry and dry material handling applications.
采用镶铸工艺制备了硬质合金-45钢双金属复合耐磨材料。
The wear resisting composite of cemented carbide-steel 45 is fabricated by using casting-in process.
试验结果表明,钢表面强化层具有良好的耐磨、耐蚀性能。
The experimental results show that the surface strengthened layers of steel possess better wear and corrosion resistance.
钨能进步钢的红硬性和热强性,并能进步钢的耐磨性。
Tungsten can improve the hardness and thermal strength of steel, and can improve the wear resistance of steel.
铝合金链轨,磨擦系数小,拉片平顺,外加不锈钢耐磨边框。
The aluminum alloy caterpillar track, the friction factor is small, pulls the piece to be smooth, sur - stainless steel wear-resisting frame.
本试验结果还说明,在一些磨损条件下,高速钢中一次碳化物对耐磨性的影响不是主要的,基体性能可以起到更大的作用。
It may also be inferred that under certain wear conditions, it is not primary carbides but matrix properties which play major role in the wear resistance of HSS.
耐磨、耐蚀。铜合金氩弧焊及钢的堆焊用。
Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel.
含锰11- 14%的钢有极高的耐磨性,用于挖土机铲斗,球磨机衬板等。
Wear resistance high manganese steel 11-14%, for the excavator bucket, ball mill liner.
良好的热稳定性、高强度、高弹性、高耐磨及高耐蚀性等性能,使得由不锈钢微细丝加工的产品得到了广泛应用。
The products made with stainless steel fine wire are applied extensively due to their good heat stableness, high strength, high elasticity, high abradability and stain resistance.
实验结果表明,GDL-4钢具有优异的耐磨性。
Experiment effect prove that GDL-4 steel has better wear resistance.
第二相强化奥氏体不锈钢在腐蚀性较强、耐磨性较弱的环境中耐腐蚀磨损性能较好。
On the other hand, when the environment was strong erode and faint abrasion, the second phrase strengthening austenite stainless steel have well corrosion wear characteristics.
第二相强化奥氏体不锈钢在腐蚀性较强、耐磨性较弱的环境中耐腐蚀磨损性能较好。
On the other hand, when the environment was strong erode and faint abrasion, the second phrase strengthening austenite stainless steel have well corrosion wear characteristics.
应用推荐