本实用新型涉及一种电弧炉导电横臂与电极升降立柱的绝缘连接结构。
The utility model relates to an insulation connection structure between a conductive cross arm of an electric arc furnace and an electrode lifting column.
文中着重介绍了国外现行管道绝缘连接的几种标准形式，及对其绝缘性能的检测。
The paper basically introduces the several standard forms of present pipeline insulation connecting technology in foreign countries and some monitoring methods of insulation property.
这位资深工程师所知道的就是两个音响部件之间的连接，两段铜线和一些绝缘介质之间的接收器、混音器、放大器和扬声器。
What the senior engineer knew was the connection between two sound components — such as receiver, mixer, amplifier, and speakers — went beyond two copper wires and some insulation.
将连接回路零件的电气配线依适当的方法在绝缘物上以电气导体再现。
By using appropriate method on the electrical wiring of circuit connecting parts, to show the electrical conductor on insulating material.
无论对哪种现象，选择很好的绝缘材料，并使连接结构尽可能地牢固都是很重要的。
Regardless of the phenomenon involved, it's important to choose good insulating materials and make connecting structures as rigid as possible.
在该图中，我们测量一个多管脚的连接器中某个管脚与其它所有管脚之间的绝缘电阻。
This diagram shows measuring the insulation resistance between any one pin and all other pins on a multipin connector.
特别在外部环境中，太阳能连接软管的绝缘层可有效地降低水循环时的能量和热量的损失。
Especially in external environments, preferring hoses with insulating prevents energy and heat losses which are exteremely important for the whole system.
太阳能连接软管可以简便地从温度传感器连接到控制器，他除了软管和绝缘层外，还附加了一个电缆。
Also to ease making the connection from collector temperature sensor to control unit, a double-tipped silicon cable is attached besides the hose and insulation.
使用拼接工具，相关电气设备和工具接头，焊接和绝缘导线和相关的接线工，从而连接到输配电网络。
Splice, solder and insulate conductors and related wiring to connect power distribution and transmission networks using splicing tools, related electrical equipment and tools.
由一根绝缘杆同时开动的三个移动触点断开和连接电路。
Three movable contacts, actuated simultaneously by an insulated rod, open and close the circuit.
这些要求也适用于连接到绝缘电源的LED光源，这些绝缘的电源有干电池，燃料电池，和诸如此类的电源。
These requirements also apply to LED light sources connected to isolated (non-utility connected) power sources such as batteries, fuel cells, and the like.
所以在构建测试夹具和进行弱电流及高阻抗连接时，尽量减少绝缘体之间及导体之间的接触也是很重要的。
Therefore, it's important to minimize contact between insulators as well as conductors in constructing test fixtures and connections for low current and high impedance.
过高的湿度会降低印制电路板和测试连接绝缘子的绝缘电阻。
Excess humidity can reduce insulation resistance on PC boards and in test connection insulators.
绝缘电阻、介质耐压和接触电阻检验是保证电连接器正常可靠地工作的最基本的常规检验项目。
The testing of insulation resistance, dielectrics voltage-resistance and contact resistance is essential for the connector to reliably operate.
氯丁橡胶绝缘垫圈和全部环氧树脂密封，提供真正的无芯电缆连接。不需要另外配置绝缘电缆盒。
Neoprene grommet and complete epoxy encapsulation provide for a true non-wicking cable entry. An isolating cable chamber is not needed.
绝缘接头与管线连接后，不许在接头5米内起吊管线。
It is forbidden to lift pipe within 5 meters closed to the joint after insulation joint is connected to the pipe.
在新、旧管子连接处安装绝缘法兰，破坏了长管道的原电池，即：阳极(新管子)和阴极(旧管子)间电断路。
By insulating flange at the junction between the new and old pipe, the long line galvanic cell is "broken up" - the anode (new pipe) is electrically separated from the cathode (old pipe).
优化了连接区域导电漆与绝缘塑粉层衔接的处理工艺。
How to deal with the juncture between the electric-lacquer of connected area and the layer of insulating-plastic has been optimized.
如果无法找到三同轴的真空接头，那么可以在绝缘的BNC连接处构建金属安全屏蔽(图4 - 18)。
If a triaxial vacuum feedthrough is unavailable, a metal safety shield should be built around the isolated BNC connection (Figure 4-18).
为确保定位精度，将周围的针脚用绝缘胶带封住，留出连接的针脚。
To facilitate precision, tape over the surrounding 'pins' except the ones you are trying to connect.
这些引线通过按压连接器（10）连接到电门和接受器引线，并通过乙烯基管（11）绝缘。
These lead wires are mated to the switch and receiver lead wires by press-on connectors (10) and are insulated by vinyl tubing (11).
气缸和帽子，油管的连接一般需要电气绝缘。
The connections of cylinders and caps and tubing generally need to be electrically insulated.
应采用双重绝缘或加强绝缘将由保护阻抗连接的各个部件隔开。
Parts connected by protective impedance shall be separated by double insulation or reinforced insulation.
该动保险片，它连接绝缘系统，而且，它受控制杆顶抵并常闭连 接该定接触片。
The movable safety piece is connected with the insulating system, is supported against by the control rod, and is in normally closed connection with the fixed contact piece.
为了安全，务必用电工胶带绝缘任何未连接的电线。
Be sure to insulate any loose unconnected wires with electrical tape for safety.
ID连接即绝缘位移连接。
避免焊机内进水或受潮，否则及时吹干，用兆欧表测量绝缘情况(包括连接节点之间及连接点与机壳之间)。
Aviod water and moisture penetration, otherwise blow it dry in time and start a megger insulation test which should include the insulation between connection joints as well as joints and cabinet.
避免焊机内进水或受潮，否则及时吹干，用兆欧表测量绝缘情况(包括连接节点之间及连接点与机壳之间)。
Aviod water and moisture penetration, otherwise blow it dry in time and start a megger insulation test which should include the insulation between connection joints as well as joints and cabinet.
应用推荐