本文介绍了用微机控制的电气设备绝缘参数测试仪的设计。
In this paper the design of the insulating parameter tester for electric devices controlled by computer is intro-duced.
通过对绝缘参数的在线检测可及时发现设备缺陷，预防事故的发生。
By measuring the insulation parameters, the defects can be discovered and the accidents can be prevented in time.
提出了利用模糊逻辑-神经网络分析高压电气设备绝缘参数变化趋势的方法。
The fuzzy logic-neural network is used to analyze the tendency of insulation parameter change of HV(High Voltage) electric equipment.
我国城市轨道交通成套开关装置绝缘参数至今没有可依据的国家、行业标准。
In China, there haven t yet any national standard or industrial standard for the insulation parameters of the switchgear assembly of railways.
该测量方法的提出彻底解决了传统绝缘参数间接测量法只能测量电网对地阻抗近似代替对地电容的缺陷。
This presented method thoroughly gets over a gap that foregone indirect methods can only measure insulation impedance to substitute distributing capacitance.
本文对便携式绝缘参数在线测试仪的研制进行了说明，叙述了测试原理及电路的组成，对软件的设计也进行了简述并给出了测试仪的主要参数。
This paper presents a portable on - line insulation parameter tester. The measurement principle, configurations of hardware and software, main specifications and testing results are described.
对于较高电压等级的电缆，本文通过对绝缘参数的估算得出结论：几种已有的针对较低电压等级电缆的在线监测方法，难以有效地用于110KV的XLPE电缆绝缘在线监测。
For those of high voltage level, after the estimate of their insulation parameters we draw the conclusion that those above methods cannot apply to on-line insulation monitoring of 110kv XLPE cable.
该仪器体积小、重量轻，能对电气设备绝缘性能的诸参数实现快速准确的测量。
The tester which is small in volume and light in weight can measure the insulating parameters of electric de-vices rapidly and accurately.
高压并联电容器极对壳绝缘水平是保证其在电网安全运行的重要参数。
The Insulation level between poles and enclosure is important for high voltage shunt capacitors to increase the operation reliability.
大电机绝缘寿命预测的困难在于如何根据各种测得的参数及其变化趋势预测残余击穿电压。
The difficulty to estimate insulation life of large electrical machin es lies in how to estimate residual breakdown voltage according to various parameters measured.
确定模块式结构的直流屏电源监控装置，分为主监控单元、绝缘检测单元、系统参数监控单元、电池巡检单元。
The DC power system is determined to be composed of the main monitoring system , the DC insulation monitoring system and the parameter monitoring system with a blocking structure.
局部放电是评定高压电器设备绝缘老化程度的重要参数。
Partial discharge is important parameter for evaluating insulation ageing of high voltage electric appliance and equipment.
介绍了ZFN13-40．5（Z）气体绝缘金属封闭开关设备的使用环境、技术参数、结构布置、产品特点和主要型式试验等内容。
The paper introduces suitable environmental conditions, technical parameters, general layout structure and main type tests of ZFN13-40.5(Z) gas insulated metal-enclosed switchgear (GIS).
只要合理地确定结构和参数，绝缘拼接式磁性槽楔不但能提高电机效率，还能提高电机负载能力。
It is shown that the spliced insulation magnet slot wedge can raise the efficiency and load bearing capacity of electric machine if the structure and parameters are reasonably defined.
这些参数主要包括：外观、干燥度、离子污染、助焊剂残留、表面绝缘电阻和电迁移等。
It 'mainly concludes these characteristic parameters, such as visual, dryness, ion contamination, welding flux residual, surface insulation resistance and electric migration et al.
系统还可以实时自动存储放电数据，查询放电参数的变化趋势，进行绝缘状态评估。
The history data can be stored automatically and real time. Moreover, the developing trend of discharge parameters can be queried and analyzed for the condition evaluation of insulation.
论述了绝缘抽真空过程，确定了低温真空干燥工艺参数。
The rarefying process of insulation is expounded, and the technological parameters for vacuum drying at low temperature are determined.
主要内容包括：工频暂时过电压，潜供电流，操作过电压，金属氧化物避雷器主要参数，特高压电气设备的绝缘水平等。
Paper covers temporary overvoltages, second arc current, switching overvoltage, major parameters of MOA and insulation level of UHV AC apparatus.
考察了阻燃剂磷酸脒基脲浓度、浸渍处理时间对阻燃效果的影响，并研究了绝缘纸经阻燃处理后热降解参数、剩炭率、击穿电压的变化情况。
Probed the effect of the content of guanylurea phosphate and the soaking time on flame retardation, at the same time the treated insulated paper was studied by thermal analysis.
通过实验得到了绝缘树脂的热老化性能参数，如温度指数等，验证了绝缘树脂耐热等级的可靠性。
Then the properties parameters, such as temperature index, are gotten by experiment. The reliability of insulation resin with heat-resistant class is verified.
地下管道涂层表面绝缘电阻是直接关系到阴极保护效果的一项重要参数。
The insulating resistance on the coating surface of buried pipelines is a very important parameter which is directly concerned with the cathode protection effect.
结合近年来国内外相关文献阐述发电机绝缘老化机理，并提出用统计过电压参数与运行记录相结合的方法，推定绝缘剩余寿命。
Based on the insulation aging theories in recent years, the method combining statistic overvoltage parameters with operational records is proposed to estimate the residual life of insulation.
研究了工艺参数对铝微弧氧化陶瓷层电绝缘性能的影响规律。
The effect of process parameters on the electric insulance of micro arc oxidated ceramic coat on aluminium plate is studied.
介绍了母线参数的测量方法，提出了一种简单、实用的测量母线对地绝缘电阻值的方法；
It has introduced the survey method for bus parameter, advances a simple and practical survey method of insulating resistor to the ground for DC bus;
通过制定这三个参数与绝缘子污秽程度间的模糊规则，采用模糊判警的方法，提高报警的准确性。
By designing the fuzzy rules between the three parameters and the extent of insulator contamination, the fuzzy alarming method is used to improve the accuracy of alarm.
阐述了数控包带机平包主绝缘技术操作原理及工艺参数的设定。
The flat coilling major insulation with numerical control coilling machine is introduced.
因此，必须从线圈的绝缘强度、机械强度、耐热性能、转换效率等方面综合考虑，进行线圈结构参数优化。
Therefore it must be taken into account from the coil strength, mechanical strength, heat resistance and conversion efficiency etc, for the optimization of the coils 'structure and parameters.
通过对初级绕组的计算分析及考虑体积、绝缘的基础上，确定了ST的相关参数。
With consideration of ST's insulation and volume, the parameter of ST was determined by the theory analysis and computation of the primary winding.
在装置“S- 300”上，通过测量真空磁绝缘传输线中电极间电子流轫致辐射和负载上的电流、电压等参数，研究了磁绝缘传输线中的电流损失特性。
The current loss in magnetically insulated transmission line (MITL) on pulsed power installation "S-300" is studied by measuring bremsstrahlung between the electrodes, current and voltage in the load.
研究了硅衬底导电率变化对金属绝缘半导体传输线的分布电阻和分布电感参数的影响。
Examples are given to illustrate that the change of silicon substrate conductivity affects distributed parameters of MIS transmission line.
应用推荐