《钢结构设计规范》编写组。
荷载是高耸结构设计规范中的一个重要部分。
Load is an important part for code of high rising structure.
简要比较轻钢结构与钢结构设计规范的差异；
The author briefly introduces the differences between the design codes for light steel structure and structure design.
上述主要概念也反映在我国混凝土结构设计规范中。
The above mentioned concepts is also reflected in the new Chines…
所得结论可供修订混凝土结构设计规范及工程设计参考。
The results may serve a reference for the re- vision of design specifications of concrete structure and i…
目前各国钢结构设计规范对空间失稳计算的规定出入比较大。
The provisions for checking these kinds of instability differ quite a lot in Various specifications of steel structures design.
该方法适应了我国现行混凝土结构设计规范，便于工程设计人员掌握。
This method is in line with the current standard of concrete structure design of our country and is easy to grasp for engineering designer.
生产的产品均符合GB50005—2003木结构设计规范的标准。
Our manufacture is qualified for the gb50005-2003 timberwork design specifications.
推荐公式可供《钢结构设计规范》(GBJ1 7- 88)作补充参考。
The recommended formula can be a supplementary reference to "The Design Code of Steel Structure" (GBJ17-88).
本文结合我国现行钢结构设计规范，提出了一套钢梁抗火计算和设计的实用方法。
A practical approach, based on the up-to-date Chinese Code for the design of steel Structures, is proposed in this paper for fire-resistant calculation and design of steel beams.
希望本次试验研究的结论能对制定碎石rpc材料的结构设计规范提供一定的参考。
We hope this pilot study's conclusions can formulate the structural design of gravel RPC materials specification to provide some reference.
计算结果符合结构设计规范的要求，可以为半硬式平流层飞艇的结构设计提供参考。
The simulation result comply with the specifications of structure design well, and a reference for semi-rigid structure of the stratospheric airship was provided.
我国混凝土结构设计规范的安全设置水准与国际通用标准之间存在着相当大的差距。
As compared to design codes of practice in developed countries, the safety margin of structural members set in the Chinese Building Code for Concrete Structures is rather low.
本文主要介绍新修订的《混凝土结构设计规范》(报批稿)中叠合构件的设计方法。
This paper introduces design methods for composite members in the newly revised "Code for design of Concrete Structures" (GBJ 10-88).
所得结论可为《钢结构设计规范》(GB 50017- 2003)修订提供参考。
Conclusions may be a reference for the modification of "Code for Design of Steel Structure" (GB 50017-2003).
文摘：现行《高耸结构设计规范》中风振系数的计算没有考虑局部质量、面积变化的影响。
Abstract: The aberrance of the vibration coefficient of steel tower under wind load cuased by aberrance of local mass and outline is not considered in recent applied eerie.
混凝土受压状态下栓钉抗剪承载力约为现行钢结构设计规范规定值的1.5 ~ 2.2倍。
The push-out test results of shear bearing capacity is about 1.5-2.2 times of the value of current design specifications.
《砌体结构设计规范》GB50003 2001关于梁端有效支承长度采用了简化计算公式。
The simplified calculation formula for effective support length of end beam is determined by the code (GB50003-2001) for design of masonry structure.
可用《混凝土结构设计规范》（GB50010-2002）的公式估计其裂缝宽度，安全性高。
The formula in Code for design of concrete structures (GB50010-2002) can used to estimate the width of crack.
我国钢筋混凝土结构设计规范(TJ10—74)中未列出偏心受压构件刚度和裂缝的计算方法。
In our national Design Code of Reinforced Concrete Structures TJ10-74, there are no recommended methods for computing stiffness and crack of eccentrically loaded members.
当前的工程结构设计，在国内的结构设计规范中，多已采用以概率理论为基础的极限状态设计法。
Most of recent domestic design codes of engineering structures have adopted the Probability-Based Limit State design Method.
现行钢结构设计规范(GB50017- 2003)规定梁的支承加劲肋计算长度取腹板高度。
Effective length of bearing stiffeners of steel girders has been taken as the web depth in the current Code for design of steel structures (GB50017-2003).
“套箍强化理论”导出的钢筋混凝土承压强度计算公式，被我国各行业混凝土结构设计规范普遍采用。
The calculating equation for bearing strength of reinforced concrete, which is educed by the Theory of Hooping Strengthening, has been adopted in Design Code of concrete Structure.
本文参考民船结构直接计算的方法，结合舰艇结构设计规范，研究舰船结构直接计算方法和解决方案。
This paper study on naval ship structure direct design methods by reference the commercial direct calculation methods and naval ship structure design rules.
我国钢筋混凝土结构设计规范中，钢筋混凝土受弯构件的刚度公式是在半理论半实验的基础上建立起来的。
In our national Design Code of Reinforced Concrete Structures, the stiffness formulas of Reinforced Concrete Flexural members were based on half theoretical analysis and half test result.
《钢结构设计规范》（GB50017—2003）提出对单轴对称截面钢压杆的弯扭屈曲需做单独验算。
Struts of singly symmetric section need to be checked on flexural torsional buckling, according to the current code for steel structure (GB50017—2003).
基于现行硅结构设计规范，提出了组合梁从开裂到极限阶段抗扭刚度的计算公式，可供组合梁受扭设计参考。
Based on current concrete design criterion, a torsion stiffness formula for composite beams from the cracking stage to the limit stage was proposed for design reference.
但由于各种原因，轻型木结构在我国仍处于起步阶段，新的木结构设计规范第一次将齿板连接木桁架收录进来。
But for various reasons, in our country light wood frame construction is still in its infancy, the metal plate joint first appears in the new code for design of timber structures.
但由于各种原因，轻型木结构在我国仍处于起步阶段，新的木结构设计规范第一次将齿板连接木桁架收录进来。
But for various reasons, in our country light wood frame construction is still in its infancy, the metal plate joint first appears in the new code for design of timber structures.
应用推荐