创建一个镜像的结合曲线。
本文提出一种基于凸性连通分支搜索结合曲线拟合的多椭圆检测算法。
In this paper, a new methodology was proposed based on the connected convex curve searching and ellipse fitting.
除了凹面镜，能量塔以外，还有第三种新的太阳能热技术。结合了曲线，盘状镜面和热发动机的装置。
In addition to parabolic troughs and power-towers there is also a third solar-thermal technology, which combines curved, dish-shaped mirrors with heat engines.
如果垂直分布曲线与已知灰羽范围相结合，火山灰浓度就可以计算出来。
If the vertical profile is combined with the known extent of the plume, a concentration can be calculated.
采用极化曲线测试结合扫描电子显微镜分析技术，研究了退火对铝合金阳极的活性的影响。
The effects of annealing on the activity of al alloy anode were studied by measurement of polarization curves and analysis of SEM.
面形检测采用边缘定位的方法，并且结合了曲线拟合的方法求解一维位移场来计算误差。
It USES edge localization and curve fitting to solve one dimension displacement field and calculate the error.
方法以紫外褶合光谱为基础，结合PLS法，利用计算机信息处理技术的褶合曲线分析法。
METHODS Based on UV convolution spectrum with PLS method, we used convolution spectrometry of computer information process technology.
结合具体的生长过程，对在位监测曲线进行合理的解释。
A reasonable explanation has been found to explain the reflectance transitions in the monitoring curves.
提出了一种将圆锥曲线拼接法与历表相结合，快速设计月球卫星地月转移轨道的方法。
A fast design method for the lunar satellite transfer trajectory is presented by combining patched conic technique and ephemeris.
结合微分几何的曲线论和分布荷载作用下索的受力模型，研究了索膜结构中边索、脊索和谷索的受力分析和形状分析。
Combined the curve theory of differential geometry and the cable model applied distributed load, form analysis and tension analysis of boundary cable, ridge cable and valley cable were performed.
文章结合代数曲线积分思想与活性边表技术，提出了一种新的任意多边形代数积分算法。
Based on the Curvilinear Integral and its sorted edge table, a new polygon fill algorithm is developed in the article.
提出一种新的轮廓特征点提取方法，它利用最小二乘法拟合轮廓曲线，结合斜率、曲率信息提取特征点。
A new feature-points extraction algorithm is proposed, which USES least square method fitting contour curve and combines slope, curvature information to extract feature-points.
在此基础上提出了用不稳定试井资料确定气井产能的新方法，即用压力恢复曲线法与压降曲线法相结合确定气井产能的新方法。
Based on these, the new method that pressure build-up curve associated with pressure fall-off curve to determining the productivity of gas well is proposed.
在经典算子的基础上，结合边界跟踪和曲线拟合的理论，得到了能较好处理一般质量图像边界的算法。
On the basis of classical edge operator theory and combined with edge tracking and curve fitting theory we developed an algorithm which can deal with the edge of ordinary quality image better.
结合我部现有铁路曲线地段的常见病害，进行全面分析其生成原因，提出相应的养护方法及达到的效果。
Combine with the common malady of our extant railway curve area sector to analyze the reason of it completely and raise relevant ways of maintaining and the attainable effect.
其次利用取心井的各项分析化验资料结合测井曲线，确定流动单元的划分数量和标志。
Is it fetch every analysis, sampling well test materials is it log well curve to combine to utilize secondly, confirm and flow the quantity of division and sign of the unit.
采用遗传算法与常规非线性优化方法相结合的途径，进行试并典型曲线的自动拟合研究。
Through a hybrid way to combine Genetic Algorithms (GA) with convention nonlinear optimization, a study of automated match typical curve of well test has been done by this paper.
本文结合工程实例，介绍了缓和曲线上桩位设计的计算方法，并编制了实用小程序。
This paper introduces the count method of pile location design on the relaxation curve, and the author compiles the small practical program.
根据实验渗流曲线的非线性特征，并结合微分原理，提出了一种广义的渗流描述法。
According to the non_linearity of the flow curve and the differential theory, a generalized description method for fluids flow was propose.
公路平面线形设计的通用模式是将传统的直线法和曲线法结合起来，兼有两者的优点。
A general model for highway plan alignment design was introduced in this paper, which has the advantages of both the line method and curve method.
提出将传统可靠性增长曲线模型结合正交缺陷分类属性缺陷类型，将不同种类的缺陷放在同一横坐标上进行比较，得出软件过程定性分析结论。
The reliability growth model combines with different defect type of odc and projecting them on a common abscissa to make qualitative inferences.
实验测量了断裂阈值曲线，并结合显微观察确定了三种断裂模式：热应力、热减薄和热击穿模式。
The threshold curve was measured and the fracture modes were identified through the observation of microscopy, they are thermal stressing, thermal thinning and thermal puncture.
其次，设计基于整数拆分与预计算相结合的椭圆曲线标量乘和多标量乘算法。
Secondly, the fast algorithms for scalar multiplication and multi-scalar multiplication on elliptic curves are designed based on integer splitting and precomputation technique.
曲线拟合是测量工程中经常遇到的问题。本文结合算例。讨论了在进行曲线拟合时应注意的一些问题。
Curve approximation is the question usual on surveying engineering. The paper has discussed some questions that must be noticed on curve approximation combining with calculation example.
给出了一种将曲线拟合和相关跟踪相结合的红外目标跟踪算法。
A novel IR object tracking method which combines curve fitting and correlation matching is presented.
将改进的支持向量回归机与B -样条网络相结合，提出了一种建立回归曲线模型的新算法。
A new algorithm for modeling regression curve is put forward in the paper, it combines B-spline network with improved support vector regression.
结合数据光滑、曲线自动拟合和历史拟合技术，编制了低渗非达西渗流的试井软件。
Combing with the technologies of data softness, automatic and history imitate, the well testing software for Non-Darcy percolation flow in low permeability reservoirs compiled.
采用分级淬火的方法测定了7055铝合金的温度—时间—性能(ttp)曲线，并结合合金实际淬火冷却曲线通过淬火因子分析方法预测了合金的硬度。
Combined with measured cooling curves, the TTP curve was used to predict the influence of quenching rate on the hardness of 7055 aluminum alloy by quench factor analysis method.
采用分级淬火的方法测定了7055铝合金的温度—时间—性能(ttp)曲线，并结合合金实际淬火冷却曲线通过淬火因子分析方法预测了合金的硬度。
Combined with measured cooling curves, the TTP curve was used to predict the influence of quenching rate on the hardness of 7055 aluminum alloy by quench factor analysis method.
应用推荐