对染色织物树脂整理前后的表观色泽浓度等各项参数进行了测定与分析。
The apparent colour intensity of dyed fabrics were estimated before and after the darkening finishing.
第一，碳织物进入模具时是干的，而非事先饱含树脂。
First, the carbon cloth goes into the mould dry, rather than pre-impregnated with resin.
热定型树脂给织物添加永久性定型或洗穿性能，并改进防护剂的牢固性。
Thermosetting resins impart durable press or wash-and-wear properties to the fabric and improve the fastness of the repellent .
而不是树脂涂布纸，树脂浸泡织物用。
Instead of resin coated paper, resin soaked fabric was used.
本文研究了织物编织类型及树脂含量对碳织物复合材料力学性能的影响。
The effect of resin content and weaving type of the fabrics on mechanical properties of carbon fabric reinforced composites was studied.
采用聚氨酯(PU)树脂溶液添加到适量的壳聚糖溶液中，同时调整粘度至所需涂布的粘度，经转移涂层工艺加工成PU涂层织物。
The coating agent was prepared by adding PU solution to the appropriate amount of chitosan solution while adjusting the viscosity and then applied to fabrics through transfer coating technique.
本文中报告了关于催化剂种类和用量、树脂浓度、焙烘温度和时间的变化对织物的防皱性及强力的影响。
The effect of variations in kinds and concentrations of catalysts, resin concentrations, curing-temperature and-time on the wrinkle recovery and tensile strength is given.
文章研究了槐米色素的树脂精制工艺，采用几种不同的树脂对槐米色素进行了吸附和解吸，比较了精制槐米与非精制槐米染料对羊毛织物染色效果的影响。
A method of absorbing and separating sophora flowerbud pigment with macroporous resin was studied. The effect of the refined pigment dyed to wool fabric was approached, too.
前处理后再进行染色和树脂整理，产品前后色差可达到4级，基本达到仿毛织物的染整效果。
Pretreatment followed by dyeing and resin finishing impart the blended fabric 4-level color difference and wool-like effects.
在假定该材料宏观上是均匀与连续的条件下，选取了织物的一个完全组织及所包含的树脂作为一个代表性体元来建立分析模型。
Assuming that the composites are homogeneous and continuous on macrostructure, a representative volume element (RVU) including a stitch repeat and resin was taken to setup analysis model.
将碳纤维织物浸渍-涂层酚醛-缩醛粘结剂树脂，加压固化后制备出碳纤维织物复合材料。
The carbon fabric composites were prepared by dip-coating of the carbon fabric in a phenolic resin and solidified under pressure.
根据市场要求，对棉织物后焙烘加工工艺，包括树脂和催化剂的选择，整烫和焙烘条件(整烫温度、蒸汽湿度等)等方面进行工艺分析。
Aiming at the market demands, post curing process of cotton fabric was carried out, the influences, of selections of resin and the catalyst, curing conditions of temperature and time were analyzed.
运用树脂整理的方法，使棉织物具有防钻绒效果。
The down proof cotton fabric was obtained through the resin finishing.
为了改善苎麻织物手感，提高弹性及悬垂性，合成了树脂整理添加剂e- 4和优良的有机硅柔软剂WF - 92。
Resin additive E-4 and silicone softener WF-92 were developed to improve the hand of ramie fabric. and to enhance its elasticity and drapability.
敝公司提供水性压克力乳化浆及美耐明树脂二种织物处理剂。其对于棉及人造纤维均能提供优异之定型，防缩防皱处理效果。
We provide acrylic emulsion resin and melamine resin, both are water soluble, is effective for wrinkle and shrink-resistant finish for cotton and cellulosic fiber.
合成了一种季铵化反应性树脂无醛固色剂het，测定了该固色剂对羊毛织物经酸性红g染色后的固色效果。
Quaternized reactive formaldehyde-free color-fixing agent HET was synthesized, and its color fixation effect was tested for wool dyed with acid dye red g.
交联固色的结果表明，环氧树脂交联剂在棉织物和丝绸上的交联固色率达到了97%和99%。
The results of dye fixations demonstrated that the fixation of the epoxy resin crosslinkers reached 97% and 99% on cotton and silk respectively.
再以预处理后的新酚树脂为基体、乙炔炭黑为导电填料、玻璃纤维织物为增强材料制备了导电复合材料；
The modified xylok resin was subsequently blended with glass cloth and acetylene black to generate a new conductive composite.
研究等离子体处理对用丝素与乙二醛联合整理及树脂整理后棉织物防皱效果的影响。
Effects of plasma treatment on the crease resistant cotton fabric finished with fibroin and glyoxal, or with resin are studied.
根据本发明，滚筒基体(11)由酚醛树脂浸透的织物纤维或者硬纸板形成。
According to the invention, the roller basal body (11) is made of textile fabric or hardboard soaked by phenolic resin.
采用有机硅树脂对精纺纯毛织物进行防毡缩整理，整理后的织物面积毡缩率、经向和纬向收缩率都达到“机可洗”标准，其他各项性能指标都较好。
After finished with silicone resin, the anti felt shrinkage and warp and wept shrinkage of 100% wool worsted fabric could be kept in "machine washable" standards with other feature index excellent.
本文将改性的苎麻与树脂混纺或混织的织物在热压机上压制成苎麻纤维与树脂的复合板材。
The composite sheets were fabricated from cospinning or blend-weaving textiles of modified ramie fibers and polymer in hot-pressing.
研究了树脂用量、催化剂用量对整理织物折痕回复角、甲醛释放量和缓释性能的影响。
Effects of content of 2d resin and catalyst on the crease recovery Angle, and formaldehyde releasing were investigated.
研究了树脂用量、催化剂用量对整理织物折痕回复角、甲醛释放量和缓释性能的影响。
Effects of content of 2d resin and catalyst on the crease recovery Angle, and formaldehyde releasing were investigated.
应用推荐