在之前的文献中,链路级和系统级仿真器之间一般使用平均值和真实值接口的方法,但是由于这两种方法的不精确性和复杂性。
Previously, Average Value Interface and Actual Value Interface have usually been used. Due to both inaccuracy and complexity, probably they are not effective in OFDM/multi-carrier network evaluation.
设计嵌入式仿真平台,可以大大缩短开发嵌入式软硬件的周期,使得调试操作系统级的代码更加方便。
Designing embedded simulation platform can shorten embedded software and hardware development cycle greatly and make debugging codes of operating system level more conveniently.
在完成该单元的RTL级设计的基础上,进一步构建了该单元及整个系统的功能仿真平台,在该平台上验证了设计的正确性。
This paper constructs the function simulation platform for buffer manager and the whole system, and validates the design on the platform after the RTL design.
本文在大系统分解-协调原理的基础上提出了一种离散事件动态系统仿真的两级递阶算法。
This Paper develops a two-level hierarchical algorithm for discrete event dynamic system simulation based on decomposition coordination Principle for large scale systems.
通过仿真验证并与常规串级PID控制系统进行比较,表明自适应PS D控制系统具有更好的控制效果。
Through simulation verification and comparison with conventional cascade PID control system, the results show the self-adaptive PSD control system has better control effectiveness.
最后从实验数据出发,通过实验与仿真的对比,对系统级模型的重要参数进行修改,从而建立基于实验数据的数字仿真模型。
With the help of experimental data and compare with the simulation result, this paper corrects some important parameters of system model and gives out the digital simulation model.
提出了一种弧焊机器人任务级离线编程系统的结构,包括建模器、任务编程器、任务规划器和机器人运动仿真器等四个基本模块。
A structure of task level OLP system is presented for arc welding robot, which consists of a modeler, a task programmer, a task planner and a robot motion simulator.
CTCS 3级列控系统仿真测试平台到现在为止已经基本搭建起来,为今后的系统完善以及测试功能的实现提供了基础。
The CTCS3 simulation and test platform is established thus far and provides foundations for perfection of system and realization of test functions.
本文通过MATLAB编程实现正交频分复用(OFDM)的系统仿真,系统采用卷积码和交织码级连的差错控制编码。
This test realized emulational system of OFDM through MATLAB programming, adopted error control coding of concatenation of convolutional codes and interlaced codes.
通过仿真及与PID控制的比较表明,采用PF C - PID串级控制策略能够改善交流伺服系统的控制特性。
The simulation results and the comparison with PID cascade control show that the PFC-PID cascade control strategy can improve the controlled performance of AC servo-system.
仿真结果表明,较之传统的过热汽温串级调节系统,采用该模型预测控制策略的过热汽温控制系统的控制性能有很大的提高。
The simulative results show that the control performance of the model predictive control system is superior to that of the traditional cascade control system.
针对火炮控制系统电气元件类型多、维修难度大的特点,提出了火炮控制系统板级仿真的思路。
Aimed at features of that electrical element of gun control system includes many types and maintenance is very difficult, the idea of IC simulation of gun control system is proposed.
在空调电控板测试诊断系统中采用了软件信号仿真和硬件信号模拟相结合的设计方法,最后采用多线程、多优先级的编程技术进行实现。
This system is designed by employing the method of combining signal emulation with signal simulation in addition to multithreading and multi-priority programming technology.
对MCS—51单片机进行正向设计,包括系统划分、编写代码、RTL级仿真与综合、门级仿真等。
The design of MCS-51 Microcontroller is followed the Top-Down design way, including system partition coding (VHDL) RTL simulation synthesis, gate level simulation ect.
本文以一级倒立摆系统为实验对象,仿真实验结果表明:所提出的控制方法具有非常好的控制效果和稳定精度,抗干扰能力强。
The paper experimental object is a single inverted pendulum. It is shown from the simulation results that this method has good control effect, good steady accuracy and good interference rejection.
多端口组件网络方法是一种新的系统级统一建模方法,通过该方法形成的多端口三维组建库可以实现MEMS器件的快速设计与仿真。
The multi-port-element network method is a new unitive modeling of system-level. The fast design and simulation of MEMS devices can be achieved by 3D multi-port-elements library.
本文对于这三个去隔行系统的关键模块都给出了RTL级设计和模块的功能仿真,并在最后一章中给出了去隔行系统的FPGA设计。
The three key modules are all presented as RTL level design and module functional simulation. The deinterlacing system's FPGA design is in the last chapter.
对改进型最大功率跟踪策略进行了仿真,结果表明,该控制策略在本系统设计的前级BOOST电路中可以有效地跟踪太阳能最大功率点。
Simulation about MPPT is also carried out and its results explain that the control strategy designed for the former BOOST circuits of this system can track the max power point effectively.
本课题主要完成倒立摆伺服系统运动控制模块的设计和实现,对倒立摆系统进行建模和仿真,在此基础上完成了对单级倒立摆的稳定平衡控制。
The contents of this paper consists of the design and realization of motion control model for the inverted pendulum servo system, modeling and emulating of the inverted pendulum.
本文认真分析洗衣粉生产过程的系统特性,给出串级控制的总体控制方案,并对控制算法进行了数字仿真。
The system performance of a detergent manufacturing process is carefully analyzed. An overall scheme of cascade control is given and the control algorithm is simulated.
它作为引战系统的集成仿真平台,可进行多方案选优和系统级的评估,快速验证引战系统总体性能是否达到设计要求。
As a kind of integral simulation platform, it can be used to implemented system evaluation and multi-scheme selection to validate the performance of fuse-warhead system.
最后,本文利用光伏模拟器代替传统的光伏电池,建立了单级式光伏并网发电系统,在RT-LAB仿真平台中搭建实时仿真模型,对系统进行了仿真研究。
The Real-time simulation model based on the RT-LAB software platform has been built. It can overcome the limits of real conditions of the PV experiment in the laboratory.
本文对B3G/4G系统中的分组调度算法做了较为深入的研究,在第二章中介绍了本文所使用的基于LTE系统级需求的仿真平台。
This paper discusses in depth the scheduling algorithms in B3G/4G system and in chapter 2 introduces the LTE system level simulation platform used in this paper.
本文对B3G/4G系统中的分组调度算法做了较为深入的研究,在第二章中介绍了本文所使用的基于LTE系统级需求的仿真平台。
This paper discusses in depth the scheduling algorithms in B3G/4G system and in chapter 2 introduces the LTE system level simulation platform used in this paper.
应用推荐