表明这些新型粘结金属具有广阔的工程应用前景。
It has shown that these new metal binders have wide prospects for engineering applications.
粘结剂粘结金属具有很高的精度,可达到1毫米的精度,足以产生清晰可见的细节。
Binder jetted metals are highly accurate, up to 1 mm is enough to create clearly visible details.
本文重点研究了碳化钨与粘结金属的配合比例、碳化物颗粒的粒度、粘结金属的组织成分及其硬度等因素对喷焊层耐磨性的影响,并初步得出某些因素对喷焊层耐磨性的影响规律。
The mixing proportion of WC and matrix metal, the grain size of WC, the composition and hardness of the matrix and other factors on wearability of the spray welding coating are discussed in the paper.
介绍2,3-二氯丁二烯一甲基丙烯酸甲酯共聚物的合成,以及以该共聚物为主体材料的橡胶同金属热硫化粘结的胶粘剂。
The synthesis of 2,3- DCB /MMA Copolymer and preparation of the adhesive for bonding rubber to metal with the copolymer above as the main material are introduced.
利用环氧树脂胶粘剂粘结软质聚氯乙烯作为金属板材的内衬,通过电化学阻抗测试分析了聚氯乙烯内衬耐酸耐碱性能。
Soft PVC cemented with epoxy adhesives was used as the inside lining of the metal plate and its anti-corrosion performance was analyzed through the electrochemistry impedance test in this article.
通过对钢筋与金属套筒之间采用植筋胶粘结的拉伸抗剪试验,探讨了植筋胶的粘结机理和拉伸抗剪破坏模式。
Through pullout tests for shear resistance of the adhesive steel bar in the metal tube, the bond principals and failure modes of adhesives are studied.
广泛适用于粘结各类金属、陶瓷、玻璃、橡胶、耐热塑料和许多其它材料。
The product is suitable for bonding a wide variety of metals, ceramics, glass, rubber, temperature resistant plastics and many other materials.
在LLDPE的大分子上没有极性基团,它与很多基材如金属、塑料、玻璃和低的粘结力很差。
There is no polar radical on the macromolecules of LLDPE. It has poor adhesion to many substrates such as metal, plastics, glass and paper.
用这种方式向红热表面上喷涂导致得到的陶瓷与金属基底的粘结显著改善。
Spraying onto a red-hot surface in this fashion leads to a very marked improvement in adhesion of the resulting ceramic to the metal substrate.
在通用公司的设计中,使用了可以完全粘结到热塑性阻挡层的碳纤维增强热塑性复合压力外壳来代替常规金属压力外壳。
In the GE design, the conventional metallic pressure armor is replaced with a carbon fiber reinforced thermoplastic composite pressure armor which is fully bonded to the thermoplastic barrier layer.
本文讨论了与界面粘结有关的这些表面现象以及改善液态金属与增强物界面粘结的工程措施。
This paper deals with above phenomena concerning interface adhesion and the engineering measures for improvement of adhesion of metal to enforcements.
我们将电极粘结于人的头皮上,电能便借助金属线的传导从大脑到达EEG,被制成图表。
By placing electrodes on someone's scalp, you can get the electricity from their brain to travel across the wire and into the EEG, where it is charted on a graph.
涂层中片状铝粉基本上是层层盈加,锌粉不均匀地夹杂在铝粉中,金属粉之间通过粘结剂粘结在一起。
In coat flake form aluminium powder basically is layer upon layer overlay, zinc powder did not distribute evenly in aluminium powder, glue knoted together between metal powder.
用电子扫描电镜分析和探讨了铁矿粉在还原流化床中的粘结行为与金属铁析出形态的关系。
The relation of the sticking behaviour of fine iron ore with the separating morphology of metallic iron during reduction in a fluidized bed had been analyzed with scanning electron microscopy.
聚乙烯醋酸乙烯酯(EVA)为主体聚合物的石蜡基粘结剂在金属注射成形技术中得到了广泛的应用。
Paraffin-based binders in which EVA is the main polymer are broadly applied to the technology of Metal Injection Molding.
应用于易粘结的片式元器件和微薄细小金属件的批量电镀。
The mass production of chip component tended to bond together each other and micro metal parts.
实验表明,渗覆金属处理可以使粘结合金或金属对金刚石的粘结力大大增强。
Experimental results showed that the bonding strength of metal-coated diamonds with alloy or metals was improved markedly.
金属注射成形是一种用来制造形状复杂金属零部件的新型近净成形技术,其物料组成为金属粉末和粘结剂。
Metal injection molding is a new net shape technology applied to produce complex-shaped metal parts, in which materials are metal powder and binder.
粘结层是在陶瓷层与金属基体之间的一层改善陶瓷层与基体粘结性的过渡层。
Bond coat is a kind of coating that improved the interface conjunction between the bond coat and the top coat.
金属注射成形(MIM)是一项高效率生产小型复杂形状精密零件的先进近净成形技术,其核心是粘结剂技术。
Metal injection molding (MIM) is an advanced near net shape process in efficiently producing complex parts and its key technique is binder design.
同时,公司还销售各种优质雕刻板材、金属托座、扣针、粘结剂、木托、可雕刻礼品、机器配件、磨刀机和各类刀具等等。
At the same time, our company also sells various excellent engraving materials, metal supports, pins, Gravofix, wooden splints, engravable gifts, accessories, grinding machines and cutters.
依据玻璃成型的特点,从金属学和热力学角度,分析了金属与玻璃之间的粘结及金属在高温下氧化对玻璃模具选材的制约。
According to the characteristic of glass molding, such as metallography and thermodynamic, paper analyzes the conglutination between metal and glass at high temperature.
金属粘结层与陶瓷涂层均呈层状结构,陶瓷涂层致密性较差、易出现微裂纹,金属粘结层相对致密、一般无裂纹。
Both the metal bond coat and the ceramic coat display a laminar structure. The ceramic coat shows less density and there exists some cracks frequently, whereas the bond coat denser and no cracks.
通过与硅酸乙酯水解液粘结剂的比较表明,以硅溶胶作为透气性金属陶瓷材料的粘结剂,其材料的制造工艺简单、强度较高、透气性较好。
The results of the test have shown that the operating technology for colloidal silicate binding is comparatively simple and the strength and gas permeability of the mold are comparatively good.
超微氧化镍粉作为一种纳米金属材料,在很多领域都有广泛的应用,可以作为催化剂、电池材料、硬质合金粘结剂等。
Ultrafine nickel oxide powder, a nano-metallic material, has been used in many areas, such as catalysts, battery materials, adhesives and other hard alloy.
常规的无粘结柔性管采用的是多层构造,主要为金属材料增强的热塑性管道衬里。
Conventional unbonded flexible pipe designs are a multi-layer construction based upon a thermoplastic pipe liner reinforced with metallic materials.
本实用新型提供一种金属塑料复合型材,包括塑料型材、金属板,所述金 属板通过粘结剂粘合在塑料型材的装饰面上。
The utility model provides a metal plastic composite profile, which comprises a plastic profile and a metal plate which is adhered on the decorative surface of the plastic profile by adhesive.
对幕墙基材包括镀膜陶瓷、反光玻璃、 阳极氧化和喷涂铝材以及不锈钢等金属材料均具有卓越的粘结性。
With excellent adhesion to all types of coated ceramic, glass, priming aluminum and stainless steel and so on.
对幕墙基材包括镀膜陶瓷、反光玻璃、 阳极氧化和喷涂铝材以及不锈钢等金属材料均具有卓越的粘结性。
With excellent adhesion to all types of coated ceramic, glass, priming aluminum and stainless steel and so on.
应用推荐