介绍了一种金属粉末样品的金相制样方法。
In this article a method of sample preparation of metal powder is introduced.
实验结果表明，光声谱术可对粉末样品作出快速的定量分析。
The experimental results shown that the quantitative analysis of the powder sample can be quickly made by photoacoustic spectroscopy.
混合粉末样品的力学性能几乎达到美国ASTM粉末冶金的标准。
The mechanical properties of mixed powder specimens were nearly equivalent to the ASTM for the PM compacts.
结果粉末样品在光激发下都发射光激发光信号且与辐射成线性关系。
Results the OSL signals were observed while the samples were exposed to blue light or infrared light, and the signal is linear to the absorbed dose.
粉末烧结：各种粉末样品的配料、制粉、混料、压制、真空或非真空烧结等。
Powder sintering: mixture, powder manufacturing, blending, pressing and vacuum or anti-vacuum sintering for all kinds of samples.
在它所携带的10台科学仪器中，有两台仪器可以吸收并分析探测器机械臂所收集的岩石粉末样品。
Its 10 science instruments include two for ingesting and analyzing samples of powdered rock that the rover's robotic arm collects.
采用粉末样品直接压片法，通过基体校正等手段，建立了优质镁砂X射线荧光分析方法。
By pressing the magnesia powder into disks directly and correcting the matrix effect, a method for X-ray fluorescence analysis of magnesia was established.
方法取常用的塑封集成电路芯片制成粉末样品，测量其光激发光信号对辐射剂量的响应。
Methods IC chips powder samples were prepared, and the OSL curves and their dose response and stability were measured.
用沉淀法合成的粉末样品具有较大的比表面积，并且在甲基橙溶液中表现出了显著的吸附特性。
The results of TEM and SBET showed that the powder samples possessed higher specific surface area, and it expressed remarkable adsorption properties in methyl orange solution.
用X射线衍射和扫描电镜对不同温度下合成的粉末样品进行了表征，并研究了材料的电化学性能。
The o-LiMnO2 powder materials prepared in different temperatures were characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM).
使用统计的方法，应用傅里叶变换红外光谱法对肺癌及癌旁正常组织粉末样品的红外光谱进行了统计分析。
Using statistics method, Fourier transform infrared (FTIR) spectroscopy was applied to the study of the spectrum of the powder of cancerous tissues and normal tissues near the cancer of the lung.
本工作使用改进的尝试法成功的指标化了未知晶系粉末样品邻羟基苯基二丙基磷酸酯的粉末X射线衍射数据。
In this paper, the X-ray powder diffraction data of unknown Crystal Systems of dipropyl-(2-hydroxy phenyl) phosphate have been indexed Successfully by the improved trail-and-error method.
本文第一部分以玉米粉末样品，用漫反射法测定玉米粗蛋白含量，研究了近红外仪器能量变化对分析模型预测效果的影响。
In the first part of this thesis, the effect of NIR instrument's energy level on the model predictive power was studied with maize sample.
应用傅里叶变换红外光谱法对人体粒细胞白血病(H L - 60)裸鼠异种移植模型癌变及癌旁正常组织粉末样品进行了分析研究。
Fourier transform infrared spectroscopy (FTIR) was applied to the study of normal and malignant tissues of human myelocytic leukemia (HL-60) xenografted in nude mice.
然后，将切片泡入去离子化的蒸馏水中，其中水的量与样品中的粉末等重。再测混合溶液的导电性。
Then, the slice was mixed with a quantity of deionized, distilled water equal in mass to the powder in the sample, and the electric conductivity was measured.
新技术通过在软氮化粉末渗扩介质与被渗样品间施加合适参数的直流电场来实现。
The new technology is based mainly on applying direct current field (DCF) with proper parameter between the treated sample and the powder agents.
同时硬脂酸钠加量的不同也影响着合成样品热行为的差异，这对于下一步研究超细粉末微粒的制备有很大的帮助。
Different sodium stearate weights had effect on phase and thermal decomposition of samples, it would greatly help to in-depth study of preparation of nanometer powders.
采用粉末压片、X射线荧光光谱法测定土壤及底泥样品中铜、铅、铬、锌、镍等多种元素。
This article determined variety elements in soil and mud sample, such as Copper, Lead, Chromium, Zinc, Nickel with the powder sheeting and X-ray fluorescence spectrographic methods determination.
结果表明，延长烧结时间或用湿化学法制得的粉末制备样品，其均匀性好，仅表现出体的超导电性。
The results indicated that the samples fabricated by wet -chemical method or by longer sintering time had better homogeneity and showed bulk superconductivity.
本文在蓖麻油型聚氨酯网络聚合物的基础上加入不同比例的珍珠岩或蛭石的粉末合成了系列样品。
A series of samples is synthesized by polymer networks materials based on castor oil urethane and acrylate with different ratio pearlite or vermiculite.
使用阿斯匹林粉末药品的近红外漫反射一阶导数光谱数据建立人工神经网络模型，预测未知样品。
A real data set from near infrared reflectance spectra of aspirin used to build up artificial network to predict unknown samples.
碳化硅粉末经压制成型后，在高温常压下固相烧结制成多孔碳化硅样品。
Sample of porous SiC polycrystals are prepared by solid sintering process under high temperature and normal pressure using moulding SiC powder.
上述实验结果说明，多孔硅的高效可见光发射是来源于样品制备过程中在其表面层中形成的粉末状荧光物质。
All the results above-mentioned suggest that the efficient visible light of porous silicon is from the powder-like fluorescent material produced in the process of anodization.
方法应用粉末X射线衍射方法，对取自我国主要滑石产区的药用滑石粉样品进行衍射研究（衍射图谱分析及特征标记峰鉴别）。
METHODS The powder X ray diffraction analysis was used by spectrum X ray diffraction analysis. The characteristic marked peaks of talcum was found for identification.
电镀薄片可以用来制备光学显微镜、扫描电镜及透射电镜的观察样品，而且可以用来进行粉末的热片进及业余末的显微维氏硬度测试等实验。
The plated sheet can be used to prepare the specimen for optical microscopy, SEM and TEM, it can also be used for the heat-treatment and the microhardness test of the powders.
使用安体舒通粉末药品的近红外漫反射光谱数据建立人工神经网络模型，预测未知样品。
A real data set from near -infrared diffuse reflectance spectra of spironolactone pharmaceutical powder was used to built up an artificial neural network model to predict unknown samples.
微细粒级的样品(2毫米)在玛瑙研钵中呈细粉末状。
The finer fraction (2 mm) of the samples was finely powdered in an agate mortar.
并介绍了在制备某些脆硬材料样品和粉末颗粒薄膜样品时所取得的效果。
Some results of sample making for some bittle hard materials and powder particles are also described.
该方法最突出的优点是烟草样品不需灰化处理，烟草样品粉末与悬浮剂作用直接进样测试，节约了前处理时间和试剂。
The main advantage of this method is that the tobacco powder can be directly injected as suspended sample, and has no need for cineration in advance.
该方法最突出的优点是烟草样品不需灰化处理，烟草样品粉末与悬浮剂作用直接进样测试，节约了前处理时间和试剂。
The main advantage of this method is that the tobacco powder can be directly injected as suspended sample, and has no need for cineration in advance.
应用推荐