冲击喷雾中大量固体成核剂的产生导致精细的等轴微结构。
The generation of a large population of solid nucleants in the impacting spray leads to a fine equiaxed microstructure.
显微结构由细小柱晶和等轴晶构成。
The microstructure consists of fine-scale columnar and equiaxed grains.
加热速度仅影响到等轴晶粒的均匀性；
The heating rate only has influence on the uniformity of the crystal dimension.
产于侵入岩中的辉石一般呈等轴的粒状。
Tou Huishi). Pyroxene in intrusive rock is generally equiaxed grain.
在柱状晶与等轴晶过渡区中存在着偏聚物。
Segregated solutes and inclusions are distributed at the transition boundary of the column crystal and the equiaxial crystal.
病毒颗粒呈等轴多面体，直径为33毫微米。
焊核区发生动态再结晶，生成细小的等轴晶粒。
Dynamic recrystallization takes place in the weld nugget zone and fine grains are achieved.
退火后，孪晶逐渐消失，形成等轴的再结晶晶粒。
The twins disappeared gradually and recrystallized grains formed after annealing.
退火后，孪晶逐渐消失，形成等轴的再结晶晶粒。
The twinning disappeared gradually and recrystallized grains formed after annealing.
金属铸态组织细化的关键是获得大量细小等轴晶。
The key to fining the structure of ingot casting lies in the formation of a number of fine equiaxed crystal grains.
等轴非枝晶的形成机制被认为是“包晶反应机制”。
The Equiaxed non-dendrites are considered to form through a peritectic reaction mechanism.
其中，焊核为明显的再结晶等轴晶粒，晶粒明显细化；
The weld nugget had a dynamic recrystallized, fine isometric crystal structure.
对于热障涂层而言，等轴组织对提高涂层隔热能力有利。
The equal-axis structure is profitable to thermal insulate ability of zirconia coatings.
解决这一问题的关键是扩大铸坯等轴晶区比例，细化晶粒。
The key to solve these problems is enlarging equiaxed grain zone and fining grain size.
焊缝区组织主要为等轴晶和树枝柱状晶，熔合区组织主要为柱状晶。
The crystallizing morphology on the weld seam was equiaxed grains and dendrites and that on the fusion area were columnar crystals.
主要矿物是自然铂矿、铁铂合金、钌铱锇矿、等轴锇铱矿和铱锇矿。
The trace element Rh exists mainly in native platinum, platinum-iron alloy and Pt-containing osmiridium.
图9e是图9a的线性阵列的一些声学驱动器的设置的放大等轴测图。
FIG. 9e is an enlarged isometric view of the arrangement of some of the acoustic drivers of the line array of FIG. 9a.
过滤后铸棒组织中的柱状晶区缩小，中心等轴晶区扩大、晶粒度降低。
The area of columnar structures decreased, and that of equiaxed crystals enlarged. The grain size reduced.
根据等轴枝晶生长过程的物理机制，改进了等轴枝晶生长的溶质扩散模型。
In the light of physical mechanism of equiaxed dendrite growth, solute diffusion models for equiaxed growth was improved.
核化温度升高后，样品边界定向生长的柱状晶组织减少甚至被等轴晶取代。
When the nuclear temperature increases, less columnar crystals at the border of the sample are observed and equiaxed crystals form.
本文研究了TC_6钛合金片状、网篮、等轴和双态组织的振动疲劳性能。
The vibration fatigue characteristics of TC6 titanium alloy with Widmanstatten, basket-weave, equiaxed and duplex microstructures have been studied.
采用形变热处理工艺，使工业用LF 6合金板材得到细小、等轴的晶粒组织。
A kind of fine and equiaxed crystal structure of LF6 aluminum alloy plate material is obtained by means of the technique of deformation heat treatment.
当磁感应强度和频率匹配合适时，焊缝成形良好，焊缝组织几乎为细小的等轴晶。
With optimum magnetic intensity and frequency, the weld microstructures were almost fine equiaxed grains and the weld shape was.
非典型等轴细晶材料超塑变形中复杂多变的显微组织易于产生晶粒群的运动形式。
Grain group movement is easy found in superplastic deformation of the materials with complex microstructure.
通过比较，可以利用等轴双曲线表征发散曲线，从而得出求解发散速压的简便公式。
The divergence curve may be characterized by isometric hyperbola through comparison of the drawn curve.
通过对注水井压降曲线形态的分析，提出了压降曲线的等轴双曲函数的数学表达式。
The axisymmertyical hyperbola function mathematical formulation of pressure fall-off curves is given by analysing the pattern of the generous pressure fall-off curves of the injection wells.
柱状晶向等轴晶转变（CET）是在一定的凝固过程中必须控制的一种显微组织转变。
The columnar to equiaxed transition (CET) is a kind of microstructural transformation in certain solidification, which should be controlled.
研究了凝固潜热对过冷合金熔液中的等轴枝晶生长以及溶质场和温度场的分布的影响。
The effects of solidification latent heat on the growth of equiaxed dendrite, distribution of solute field and temperature field in undercooled liquid alloy were analyzed.
研究了凝固潜热对过冷合金熔液中的等轴枝晶生长以及溶质场和温度场的分布的影响。
The effects of solidification latent heat on the growth of equiaxed dendrite, distribution of solute field and temperature field in undercooled liquid alloy were analyzed.
应用推荐