本文介绍了可控硅脉冲等离子弧焊电源的研制成果。
The result of developing SCR power supply for pulse plasma arc welding is introduced in this paper.
等离子弧焊具有能量密度高,一次性可焊厚度大等优点。
The plasma arc welding have a high energy density, thick welding thickness that can weld for single time.
试验研究了钴铬合金口腔修复材料微束等离子弧焊的可行性。
The article discussed the feasibility of micro-plasma arc welding Co-Cr alloy for oral cavity repair.
基于等离子弧焊的直接金属成形方法是一种新型的快速成形工艺。
Direct metal forming based on plasma arc welding is a novel rapid prototyping process.
据此提出了实现等离子弧焊闭环质量控制的基本思想并设计了总体控制方案。
Based on just mentioned put forward a basic thought of realizing the automatic control system of keyhole plasma arc welding and designed ensemble control programme.
试验结果表明:该电源具有良好的动特性和静特性,能很好地满足脉冲等离子弧焊的要求。
The-test results show that the power supply exhibits good dynamic and static characteristics, and therefore can perfectly fulfil the requirements of pulse plasma arc welding.
本文根据脉冲等离子弧焊接的特点,研制了一种反馈控制系统,用以控制焊缝的焊透质量。
On the basis of the characteristics of pulse plasma arc welding, a feedback control system has been developed for controlling tne penetration of welds.
采用低成本电荷耦合器件制作了焊接过程视觉传感器,实现了一种等离子弧焊焊缝实时跟踪系统。
Using low cost charge coupled device (CCD), a vision sensing equipment in welding process was made, and a real time plasma arc welding (PAW) seam tracking system was implemented.
本课题在分析常规弧焊技术特点的基础上,选取熔透式低频直流等离子弧焊电源作为成形的热源。
In basis of analyzing the features of the conventional arc welding technology, a DC low-frequency plasma welding power with fusion penetration is selected as the heat source for metal forming.
将等离子云传感器应用于脉冲等离子弧焊穿孔熔池小孔状态检测,并对检测信号的波形特征做了深入研究。
The plasma cloud charge sensor was applied to detect the status of keyhole molten pool during pulsed plasma arc welding, furthermore, the detected signals were studied.
采用焊管作为管坯 ,焊管弯曲采用专用模具热弯 ,焊接采用等离子弧焊。超塑成形采用多层模结构 ,用模具来控制波形。
Welded pipe that bended by hot bending method with a set of specific die and welded by plasma arc welding method was used as tubular blank of SPF.
等离子喷焊电源是为等离子弧提供能量的电源,涉及到焊接工艺学、电力电子学、控制理论和计算机科学与技术等众多领域。
Plasma spray welding power source, which gives energy to plasma arc welding, involves welding technology, power electricals, control theory, computer science and technology, and so on.
针对螺旋埋弧焊钢管生产中空气等离子切割烟尘对环境污染的问题,设计了一种工作稳定可靠的烟尘净化系统。
Environment pollution problem generated by plasma cutting smoke and dust during SSAW pipe production process was analyzed; a kind of stable and reliable smoke and dust cleaning system was designed.
通过对13 -5型马氏体不锈钢焊接接头进行等离子弧清根及碳弧气刨清根的比较,证明等离子弧清根对全焊透焊缝实施背面清根是可行的。
By comparing backgouging of plasma arc with carbon arc to the welded joint of 13-5 martensitic stainless steel, the backgouging of plasma arc is proved feasible for the full penetration weld.
然后主要从双丝或多丝电弧焊工艺和双焊炬组合焊接工艺两个大的方面着重介绍了纵列式熔化极气体保护焊、等离子弧-熔化极气体保护焊和双电极熔化极气体保护焊等高速弧焊工艺。
Then, high-speed arc welding processes are introduced, such as tandem GMAW, PAW-GMAW and DE-GMAW, based on two categories:twin or more wires arc welding process and two-torch combined welding process.
本文介绍了等离子弧喷焊的工艺过程及采用PC控制的硬件接口和软件编程。
The technique process of plasma spray and its PC hardware interface and software program are introduced in this paper.
本文介绍了等离子弧喷焊的工艺过程及采用PC控制的硬件接口和软件编程。
The technique process of plasma spray and its PC hardware interface and software program are introduced in this paper.
应用推荐