硬度检测是否在去除了氧化皮的表面上进行？
Is hardness tested on a surface that has been ground to remove decarburization?
运行结果表明小麦硬度检测系统能实时性好、稳定性高。
The result shows that wheat hardness test system is Good real-time and high stability.
方法仪器由介入超声硬度检测导管、生理信号单元和主机组成。
Methods the equipment was composed of intervention ultrasound stiffness detection catheter, physiological signal unit and mainframe.
通过对焊接接头的硬度检测，发现熔合区硬度下降，焊缝区略有上升。
The hardness tests on welding joints prove this by showing that the hardness reduces in fusion area, and increases slightly in weld zone.
我们可以提供给我们的客户硬度检测报告，材料合格证、尺寸报告等等。
We can provide our customers with hardness inspection report, material certificate, dimension report and so on.
该种检测方法与现今采用的各种硬度检测法的负荷大小及金刚石压头均有所不同。
It is different from the various methods adopted now in the number of weight and the diamond cone.
对淬火开裂的S45 C钢零件进行了化学成分、金相组织、断口分析及硬度检测。
The chemical composition, microstructure, fracture morphology and hardness of cracked S45C steel parts were tested and analyzed.
根据显微组织和硬度检测结果，适当调整热处理工艺，可进一步提高弹簧的疲劳寿命。
According to microstructure and the results of hardness test, appropriate adjustment of heat treatment could promote fatigue lift of spring steel.
通过断口宏微观观察、金相组织检查、化学成分及硬度检测等手段确定了叶片断裂性质和原因。
The fracture mode and cause were analyzed and determined by fracture surface observation, metallurgical structure examination, chemical analysis and hardness testing.
如果要检测硬度，陨石的标本就太小，它只能显示出这种物质无疑比一般钻石硬。
The sample from the meteorite was far too small to test for hardness, except to show that it is certainly harder than regular diamonds.
公司建立了集高低温、拉伸压缩、燃烧、硬度、色差等多项实验和检测的多功能实验室。
The company has established a multi-functional laboratory, where many experiment and test can be carried on, such as, low temperature, stretch, combustion, hardness and color difference, etc.
对已开裂断线钳钳头的显微组织、化学成分和硬度进行了检测和分析。
The microstructure, chemical composition and hardness of cracked jaws of wire clippers were detected and analyzed.
对断裂起重机吊具zg270- 500铸钢的化学成分、硬度、显微组织、断口形貌等进行了检测和分析。
The chemical composition, hardness, microstructure and fracture morphology of ZG270-500 cast-steel of cracked lifting instrument were detected and analyzed.
对断裂的金属接骨螺钉进行了化学成分、硬度、显微组织分析及表面加工质量的检测。
The analysis of chemical composition, hardness and microstructure and quality inspection of surface processing have been done to metal bone screw which was fractured in human body.
因此，对于高硬度，布氏硬度计和维氏硬度计或洛氏硬度计的检测值之间的关系就会受到所采用的球体的影响。
At high hardness, therefore, the relationship between Brinell and Vickers or Rockwell scales is affected by the type of ball used.
拥有超声波测厚仪、硬度计、红外线测温仪、扭力板手等先进的检测设备及多台套大中型阀门压力试验台等成品性能测试设备，确保产品交付合格率100%。
Ultrasonic Thickness Gauge, hardness tester, infrared thermometer, and torque wrench and many finished product test equipment etc. Those attribute to conformance rate of delivered products is 100%.
考察了复合材料的组织形貌，检测了复合材料的硬度和耐磨性，分析了复合材料的断裂模式。
The structure morphology the hardness and wear resistance of composite have been investigated, and fracture model of the composites has been analyzed.
通过对金属在洛氏硬度实验检测中的不确定度的分析与计算，介绍不确定度的评定在洛氏硬度实验检测中的作用。
The effect of uncertainty evaluation in Rockwell hardness test is described by analyzing and calculating the uncertainty of metal in Rockwell hardness test.
得出硬度和电导率可作为钛合金烧伤的检测参数的结论。
It was concluded that hardness and electric conductivity could be the parameters for burn detection of titanium alloy.
同时配备完善的硬度、金相等检测仪器。
At the same time, equipped with perfect hardness, gold equivalent testing equipment.
通过现场试验，以硬度计检测复检确认了金属材料分选仪的可靠性，并进行靶场退壳试验。
Through field test, the reliability of metal material separation is affirmed by sclerometer testing repetition measurement. Moreover, ejection experiments are made in shooting range.
对材料硬度、硬化层深度、晶粒大小、极限强度等主要采用电磁检测和超声检测。
Electromagnetic testing and ultrasonic testing are the main points for materials hardness, hardness depth, crystallite size, limiting intensity etc.
为确保品质，公司还引进日本美能达，电脑色差分光仪，膜厚机，光泽度计，铝笔硬度计，水喷雾机等一批专业检测设备。
We have introduced Japanese Minolta, computerized color spectrometer, coating thickness tester, nanometer, pencil hardometer, water spraying machines and the like professional inspection equipment.
电磁无损检测钢轨踏面硬度中，检测信号对提离效应极其敏感，所以必须对提离效应加以抑制。
Testing signal is very sensitive to the lift off effect in the hardness nondestructive testing of rail surface by electromagnetic method, so lift off effect must be restrained.
是科研机构、企业及质检部门进行研究和检测的理想的硬度测试仪器。
Scientific research institutions, enterprises and research and quality inspection departments to detect the ideal hardness testing equipment.
通过对高碳钢丝上的能量加载情况进行分析，并利用扫描电镜、维氏硬度仪等检测手段对涂层进行研究。
The energy loading processes on the high-carbon steel wires were analyzed, while the coating properties were tested by SEM, Vickers hardness instrument and other detection means.
通过对高碳钢丝上的能量加载情况进行分析，并利用扫描电镜、维氏硬度仪等检测手段对涂层进行研究。
The energy loading processes on the high-carbon steel wires were analyzed, while the coating properties were tested by SEM, Vickers hardness instrument and other detection means.
应用推荐