对直线电动机的推动力和悬浮力也做了具体分析和计算。
Furthermore, the driving force and magnetic levitation force of linear motor are figured out.
最后对一台圆筒型直线电动机进行了温升测试，效果良好。
In the end, the temperature rising of a cylindrical linear motor is tested, the results are good.
设计了一种基于自抗扰控制原理的永磁直线电动机调速系统。
A speed regulation method with auto disturbance rejection controller (ADRC) for a linear direct-drive AC servo system is presented.
提出了一种基于滑模控制的永磁同步直线电动机位置伺服控制器。
A position servo controller based on sliding mode control for permanent magnet linear synchronous motors was proposed.
实验证明该方式对于减小直线电动机推力脉动，降低噪音是有效的。
The experiment proves that the mode is effective to reduce the pulsation and the noise of linear motor.
例如直流电动机与传感器的组合，X方向与Y方向直线电动机的组合等。
Such as DC motor with a combination of sensors, X direction and Y direction, such as a combination of linear motor.
为满足进给机构控制系统实时性要求，设计了基于DSP的直线电动机控制器。
To satisfy the feed mechanism's real-time performance, the linear motor controller is designed based on Digital Signal Processor (DSP).
行波磁场与次级相互作用便产生电磁推力，这就是直线电动机运行的基本原理。
Traveling-wave interaction and secondary magnetic field is generated electromagnetic force, which is a straight line to run the basic principles of electric motors.
所谓直线电动机就是利用电磁作用原理，将电能直接转换直线运动动能的设备。
The so-called linear motor is the use of electromagnetic theory, electrical energy direct conversion of kinetic energy linear motion equipment.
为满足超高速加工的要求，近年来出现了一种新型的直线电动机伺服驱动进给方式。
A new servo feed mode driven by linear motor comes out in recent years in order to meet the requirement of high speed machining.
实验结果表明系统能够按所设计的轨迹运行，实现直线电动机无超调、快速、精确定位。
The experimental results show that the system runs in accordance with the designed orbit and realize the quick, accurate and non-overshoot positioning.
介绍了直线电动机在高速机床伺服进给中的应用，分析了直线电动机用于进给驱动的特点。
This paper introduces the use of the linear motor in high speed servo feed unit directly and analyzes the characteristic.
介绍了超导磁悬浮式直线电动机车的原理及优点，并探讨了运用该运输方式需要解决的问题。
The principles and advantages of superconduction magnetic levitation type linear motor cars are described. And problems needing to be solved in making the transport are discussed.
运用电磁场有限元方法对动磁式直线电动机电磁场模型求解，磁通分布揭示了电磁力产生机理；
The finite element method was used to optimize the electromagnetic field and reveal the mechanism of motion of moving part.
介绍了超导磁悬浮式直线电动机车的原理及优点 ，并探讨了运用该运输方式需要解决的问题。
The characteristic and design method of passive magnetic bearing were introduced in the article, then its important application in magnetic suspension system is introduced.
介绍了一种微小型永磁直流直线电动机的结构，优化了结构参数，加工出样机并进行了试验分析。
A structure of miniature permanent magnet linear DC motor was presented in this paper. Structural parameters were optimized and prototype were manufactured to make some experiments for analysis.
为了解决永磁直线电动机伺服系统中负载扰动及参数变化对系统性能影响较大的问题，采用了鲁棒控制方法。
The large influence of load disturbances and parameter changes on PMLSM servo system was resolved by robust control strategy.
实验结果表明，直线电动机的伺服刚度只受位置环比例增益的影响较大，而其它的控制参数对伺服刚度幅值影响不大。
The result presents that the servo rigidity is more influenced by proportion plus of position loop than by other parameters.
通过对磁场的分析，可以计算出直线感应电动机的运行特性。
By analyzing magnetic field, the operation characteristic of the linear induction motor was calculated.
电动机与变速齿轮箱相连，使电动机的旋转运动转化为座椅的直线运动。
The motors are coupled to transmission gear-boxes that change rotating motion form the motor into linear motion for the seats.
从不连续定子永磁直线同步电动机的结构特点和工作原理出发，建立起电机的仿真模型。
Based on the structure characteristics and operation principle of permanent magnet linear synchronous motors (PMLSM) with discontinuous stators, a simulation model was developed.
本文用最小二乘法拟合的直线确定三相异步电动机风摩耗测量的标准不确定度。
This paper determines standard uncertainty for measurement of windage and friction loss of three-phase induction motor through fitting line of least square method.
设计了一套圆筒形直线感应电动机驱动的电梯全数字变频控制系统，对其进行了试验。
This paper introduces a frequency variable control system for elevator driven by linear induction motor, and this elevator has been tested.
提出了一种连续的分段式永磁直线同步电动机位置(功角)和速度的检测方法。
This paper presents a continuous method of measuring position (power Angle) and velocity of the mover of the sectional permanent magnet linear synchronous motor (SPMLSM).
介绍了一种由电枢和永磁体构成的永磁直线直流无刷电动机。
A linear permanent magnet brushless DC motor (LPMBDCM) composed of an armature and a permanent magnet stator was introduced.
在同步旋转坐标系下，建立了直线感应电动机的矢量控制数学模型。
The vector control mathematical model of linear induction motor is established under the synchronization reference frame.
对钢次级平面型直线异步电动机进行了设计、试制和试验。
Some studies in design, advanced development, experiment for the steel-secondary plane linear induction motor were made.
电磁飞机弹射系统是一个全集成的系统，由储能系统、电力电子系统、直线弹射电动机和控制系统组成。
EMALS is a full integrated system, consisting of energy storage system, electric and electronic system, linear induction motor and control system.
在电磁关系的基础上，建立起复合次级永磁直线同步电动机的数学模型。
On the basis of electro-magnet relationships, a mathematical model of permanent magnet linear synchronous motor (PMLSM) with a conductive plate on its secondary was built.
在电磁关系的基础上，建立起复合次级永磁直线同步电动机的数学模型。
On the basis of electro-magnet relationships, a mathematical model of permanent magnet linear synchronous motor (PMLSM) with a conductive plate on its secondary was built.
应用推荐