输出的设计与大多数5v的更高的电压为12和15伏直流选择ttl电路兼容。
Outputs are designed to be compatible with most 5v TTL circuits with options for higher voltage 12 and 15 VDC.
增量编码器的设计产出与大多数5v的更高的电压为12和15伏直流选择ttl电路兼容。
The incremental encoders outputs are designed to be compatible with most 5v TTL circuits with options for higher voltage 12 and 15 VDC.
对近期提出的克服电网分布电容影响小电流接地选线的零序直流选择性保护原理作了理论分析。
This paper analyses the existing zero sequence directive current selective leakage protection principle which is to surmount the effect of distributed capacitance on it.
选择交流电作为工业标准的原因很简单，在早期供电距离很短的电网里，交流电的损耗比直流电小。
The reason was that over the short distances spanned by early power grids, AC transmission suffers lower losses than DC. It thus became the industry standard.
在伺服系统中要使系统能够满足所期望的性能，伺服系统驱动器直流母线电压的选择尤为重要。
To make the servo system have the expected its, it s especially important for selection of DC bus voltage in servo driver.
概述了在轨道交通系统中选用直流熔断器的目的及选用方法，包括额定电压、额定电流的选择，与断路器的配合工作。
The object of using DC fuse in tunnels and way of selection were expounded, including the selection of rated voltage and current, and the coordination of circuit breakers.
对直流斩波器主电路如何选择专用微型计算机硬件和软件设计进行了讨论。
Selection of DC chopper main circuit, hardware and software design of special purpose microcomputer are discussed.
比较了直流传动和变频传动在纸机上应用的各自特点，对今后我国高速纸机传动方案的选择提出了看法，并就其一次性投入和费用等做了讨论。
The characteristic of DC drive for paper machine is compared with AC drive and how to select the drive scheme for high speed paper machine and the capital investment are discussed.
采用工程设计方法对双闭环直流调速系统进行辅助设计，选择调节器结构，进行参数计算和近似校验。
According to engineering design method a double closed-loop DC motor control system was designed, a modulator structure was selected and computed, and its parameter was corrected.
主要阐述了高压直流输换流站用直流滤波电容器的特点和设计参数的选择。
This paper introduced the characteristics and parameter selection of DC filter capacitor used in HVDC transmission system.
直流电机的突出优点是通过选择磁场绕组不同的励磁方法，可以获得变化范围很大的运行特性。
The outstanding advantages of DC machines arise from the wide variety of operating characteristics which can be obtained by selection of the method of excitation of the field windings.
认为．要想提高首效糖汁的蒸发温度，同时又要避免工艺过程中的糖分损失，内筒式直流蒸发罐将是一种新型的设备供选择。
To raise the juice evaporation temperature in the first effect and avoid the sugar loss in process meanwhile, the ICDFE should be the new kind of equipment to choose.
阶段具有千分尺等级螺钉以及0.5毫米的引脚间距的特点，微型直线轴承和非接触式限位开关带有，任一步进机或直流伺服电机编码器的选择。
Stage features micrometer grade screw with lead pitch 0.5 mm, miniature linear bearing and non-contact limit switches with a choice of either stepper or DC servo motor with encoder.
本文针对微型电动汽车，在比较多种常用的直流斩波电路基础上，选择三重化桥式斩波电路作为功率变换器主电路并研究了其工作原理。
Compared with a variety of relatively common DC chopping circuit, this paper selects the triple H-bridge chopping circuit to drive DC motors and introduces its working principles.
假设一个用户选择的直接过程，应用程序需要在直流立即创建用户。
Suppose an user select the immediate process, the app has to create the user immediately in the DC.
在直流输电线路工程设计中，如果按我国现行标准规定的经济电流密度选择导线截面，将导致截面偏小，损耗增大。
In DC transmission line construction design, current national standard of economical current density will under predictcd conductor section, resulting in large loss.
通过前面板按钮选择交流输出或直流输出。
集装箱装卸桥直流调压调速系统仿真过程及方法，其中包括直流电机传动及驱动器选择、驱动器接线与控制。
Discuss the DC adjust voltage and timing system simulator process and way of the container crane, which containing the DC motor drive and drivers' select, drivers connection and control.
结果表明：电源波形是钛合金阳极氧化着色过程的关键因素之一，选择脉冲直流电源可以获得较好的着色膜性能；
Electric wave form was one of the key factors in anodizing, and selecting pulse DC power enabled the oxidizing film to have good quality;
有多种送电途径可选择，例如由交流或直流，架室线或地下电缆送电并有各种电压等级。
There are several alternate means of transmitting electric power, for example, by alternating or direct current, overhead or underground cable, and all over a wide range of voltages.
介绍了一种基于直流电流传感器检测和单片机控制的新型直流检测式选择性漏电保护系统，重点阐述了系统应用软件的设计。
This paper introduces a new kind of DC examination and selective leakage protection system based on DC Current Sensor examination and single chip computer control.
针对工程中对直流电源屏的设计需要，简要介绍了高频开关整流电源直流系统的选择。
According to the design demand of DC power supply panel in engineering, this paper introduces the selection of rectification DC rectification power system with high-frequency switch.
基于人眼视觉系统选择平坦块，选择出DCT域中的均匀部分，直接将其直流部分编码输出，不需分形匹配。
Then by selecting out the uniform parts in the DCT domain, the direct current encodes directly without any fractal matching.
分析了阻尼低频振荡的控制器选择，主要阐明了pss,TCSC和直流小信号调制的应用场合。
Chapter 3 discuses the selection of damping controllers, especially for PSS, HVDC small signal modulation and TCSC modulation.
本文提出一种用直流大惯量电动机的M-n特性曲线为依据，选择期望特性进行系统的动态设计方法。
The paper suggests a procedure of dynamic design for such system by selecting the expected performance in accordance with the Mn characteristic curve of the DC torque motor.
直流逼近的效果取决于逼近方案的选择。
The effect of direct current approximation depends on approximating schemes.
此系列伺服驱动器提供了一个极其广泛和兼容的选择无刷，水冷式无刷直流有刷电机和同步。
This servo range offers an extremely wide choice of Brushless, Water-coo led Brushless Synchronous and DC Brush motors and compatible drives.
根据供电电网电压及中间直流回路电压给定，对主电路的元件参数进行了选择和优化。
According to source voltage and middle DC voltage command, the parameters of the rectifier are chosen and optimized.
直流母线电晕特性是换流站选择母线的主要考虑因素。
The HVDC busbar corona characteristic is the main factor taken into account for choosing busbar of HVDC converter substation.
直流母线电晕特性是换流站选择母线的主要考虑因素。
The HVDC busbar corona characteristic is the main factor taken into account for choosing busbar of HVDC converter substation.
应用推荐