电镀锡焊尾，鱼叉：黄铜。
研究了一种柠檬酸盐体系电镀锡镍铜合金新工艺。
A new technology that the tin-nickel-copper alloy deposition can be electroplated in the citrate acid system bath was introduced.
本文对晶体二极管引线光亮电镀锡的可焊性进行了研究。
This article conducts a research on the weldability of crystal diode lead wire luminous electrotinning.
总结了电镀锡、锡铅合金和锡铋合金的分类、特点及应用情况。
The classification, characteristics, and application results of tin, tin lead and tin bismuth electroplating were summarized.
综述了影响罐装食品用电镀锡板耐蚀性能的因素及其试验方法。
Factors influencing the corrosion resistance of electrolytic tin plate used for food cans were introduced as well as its test methods.
移植QH Q型涂膜铅笔划痕硬度仪用来测试电镀锡板的抗划伤性。
The scratch resistance of tinplate was measured by using modified QHQ type pencil hardness test apparatus which is designed for organic paint coating.
电镀锡板CD C钝化膜的成膜机理一直是人们感兴趣的一个问题。
The mechanism of CDC film on tinplate has been one of the most interesting research topics.
电镀锡早在1843年就提出了第一个专利，1930年之后才具备工业实用性。
Tin plating as early as 1843 puts forward the first patent, and after 1930 have industrial practical.
通过对卤素法电镀锡板生产技术的原理及现状的研究，提出了生产技术的改进措施。
Through a study on the principle and the current situation of production technology of halogen type tin plate, the paper puts forward measures for improving the production technology.
宝钢电镀锡机组软熔导电辊使用寿命短，抢修频繁，一定程度上制约了机组的正常生产。
Normal production of the electrolytic tinning line at Baoshan Iron & Steel Co. Ltd. was restrained to some extent by short service life of the reflow conduct roll and frequent rush repairs.
电镀锡板弧表面抗划伤性近来受到越来越多的重视，但至今对此尚无统一的标准测试方法。
The scratch resistance of tinplate has attracted more attention recently. However, there is no standard test method for evaluating this kind of properties of tinplate so far.
研究了从焦磷酸盐槽液中电镀锡镍合金的一种新工艺，讨论了一些电镀参数对锡镍合金镀层的影响。
A new technology of tin-nickel alloy electroplating from a pyrophosphating bath was studied. The effect of some plating parameters on the tin-nickel alloy coating was discussed.
测试了锂离子蓄电池电镀锡阳极在不同充电（合金化）状态和不同充放电循环次数后的电化学阻抗谱。
The impedance spectrum of the electroplating tin anode for Li-ion batteries is measured at various states of charge(alloying)and after charge-discharge cycles.
通过对d - T57电镀锡板化学成分、性能设计及对生产工艺条件的改进，开展了多次工业试制。
Industrial trials have been conducted for D-T57 electrolytic tinplate chemical com-position property and process parameters improvement conditions.
通过对D—T5 2电镀锡板化学成份、性能的设计及对生产工艺条件的改进，开展了多次工业试制。
Industrial scale trials have been conducted by designing the chemical compositions and process parameters and improving the process conditions of d-t52 electrolytic tinplate.
采用气相快速甄别实验和电化学方法研究了对高速电镀锡薄钢板(DI材)具有缓蚀作用的四种不同的物质。
Four kinds of corrosion inhibitors for drawn-and-ironed (di) material were studied by means of electrochemical method and rapid laboratory evaluation.
本公司有生产和分选导电钢珠珠的专业设备十几台，并且建有一条专门的电镀生产线，为本公司的产品电镀锡和镍。
We have over 10 machines for steel ball manufacturing and filtering. And, one plating line is ready and it can plate nickel and tin.
宝钢1420电镀锡机组在高速生产极限规格产品时，对中央段张力的控制方式、控制精度以及分布情况有严格的要求。
The proper tension control method, precise and distribution are greatly needed for 1420 Electrolyte Tinning Line (ETL) of Baosteel when extreme-dimensioned production is being produced.
武钢冷轧厂电镀锡线锡层厚度无模型自适应（FMA）控制系统是专门为了解决大滞后时变的非线性复杂系统控制难题而研制设计的。
Tin thickness closed-loop control for tinning line, a kind of typical non-linear complex system with large time delay, is discussed.
硫酸盐光亮镀锡工艺具有电流效率高、沉积速度快、成本低及废水易处理等优点，在电镀生产中已广泛应用。
Sulfate tin plating process has been widely used in electroplating industry for its strengths such as high current efficiency, fast plating rate, low cost and easy effluent disposal.
介绍了一种金属钮扣电镀古锡的工艺，其主要工序包括除油、卤化物镀锡、氧化发黑、抛光、罩清漆等。
A process for plating Sn on metal fasteners was introduced, including degreasing, halide Sn plating, oxidative blackening, polishing and varnishing.
镀锡板就是在冷轧板的表面电镀一层均匀致密的锡层。
Tinned sheet is cold rolled sheet whose surface is electroplated with a layer of uniform and dense tin.
PLATIVE ISP3023是一种耐酸蚀绝缘保护油墨，专门开发应用于电镀一般金属的阻镀保护作用，或者酸蚀加工抗蚀保护作用，如镀镍、镀铜、镀铬、镀锡等；
PLATIVE ISP3023, a kind of insulated protective paint, is specialized applied to general plating treatment, or acid pickling, such as nickel plating, copper plating, chrome plating, tin plating, etc.
PLATIVE ISP3023是一种耐酸蚀绝缘保护油墨，专门开发应用于电镀一般金属的阻镀保护作用，或者酸蚀加工抗蚀保护作用，如镀镍、镀铜、镀铬、镀锡等；
PLATIVE ISP3023, a kind of insulated protective paint, is specialized applied to general plating treatment, or acid pickling, such as nickel plating, copper plating, chrome plating, tin plating, etc.
应用推荐