本文阐述了电路模拟吸波材料的原理。
The principles of the circuit analogy absorber were explained.
利用电路模拟结果,分析了陀螺的运动特性。
The performance of the gyroscope was analyzed by the circuit-simulating.
进行了计算机电路模拟,模拟结果与理论分析一致。
Computer aided simulation for these filter configurations shows good agreement with the theoretical results.
开发了一种磁绝缘传输线(MITL)的电路模拟方法。
A circuit model for magnetically insulated transmission line (MITL) based on TLCODE was established.
叙述了把电路模拟与实际工艺结合起来的参数提取程序的设计。
The design of parameter extraction program based on the circuits simulation combined with practical technology is also introduced.
对电路模拟吸波材料优于普通雷达吸波材料的原因进行了说明。
And the reasons of the properties of the circuit analogy absorber exceeding the ordinary radar absorbing materials were expatiated.
本文介绍了可广泛用于IC电路设计的线性IC电路模拟系统。
A practical linear IC's simulation system is presented, which can be widely used in integrated circuits design.
然后,在7个城市连胜和1赛车电路模拟,测试你的速度和控制。
Then streak across 7 cities and 1 circuit in a racing simulation that tests your speed and control.
GFMS是针对《数字逻辑》课程实验而设计的数学电路模拟系统。
GFMS is a Gate and Function Block of mixed-level simulation system, which is designed for experiment of Digital Logical.
采用等效电路模拟对于TEC的设计、优化和应用控制是一种有效的方法。
Simulation results demonstrate that the equivalent circuit approach is an effective tool for the qualitative analysis of TEC.
电路模拟证明这种简单结构具有很高的共模电压输入范围和很低的谐波失真。
This simple structure is proved through the SPICE simulation to have the very high common mode input voltage excursion and low harmonious distortion.
提出了一种新的同构判定算法:电路模拟法,即将图的同构问题转化为电路的相同问题。
A novel method, the circuit simulation algorithm, is proposed here, which transfers the graph isomorphism problem into the identical circuits problem.
本文主要介绍集成电路模拟相乘器MC1496的部分应用。引导初学者正确使用集成块。
This paper introduces partial application of integrated circuit analogue multiplier MC1496, leading the beginners to use integrated circuit correctly.
从电路模拟的角度,讨论了超声马达的系统模型构成,建立了超声马达的系统等效电路模型。
This paper describes the construction and equivalent circuit of a model for the ultrasonic motor from the point of view of the electrical analogy.
研究了在雷达吸波结构中应用电路模拟技术改进其在TE极化平面波入射下的反射特性的方法。
How to apply the circuit analog to radar structural absorbers to improve their reflection characteristics under te polarization plane wave incidence is studied.
根据振动式微机械陀螺的动力学模型导出其等效的电学模型,并利用电路模拟工具对其进行了模拟。
An equivalent electrical analogue of vibrating micromachined gyroscope was derived from its dynamics model and simulated using EDA tools.
本文提出一种通过时域非线性压缩-扩张改变FWCM采样步长,实现电路模拟误差分布控制的方法。
This paper provides a new method to regulate the step length of FWCM by nonlinear companding in time domain, so that the error distribution can be controlled in circuit simulation.
应用此模型,既能有效方便地研究分析界面特性对电子迁移率的影响,又为将来的电路模拟打下了基础。
The model can be used to study and analyze influences of interface characteristics on electron mobility and is also a basis of circuit simulations in the future.
根据微机械陀螺的动力学方程建立其振动特性的等效电路模型,该模型用电路模拟工具PSPICE实现。
An equivalent circuit model of micromachined gyroscope's oscillating properties is derived according to its dynamics equation.
经过利用商用电路模拟软件进行性能仿真所得的结果与测试结果相符,显示出良好的准确性和可等效替代性。
The simulation results with this equivalent circuit model of SMPDP in commercial software PSpice show high compatibility with former experiment results, which helps us to certify its preciseness.
文中通过对几种典型的表面势模型的分析,论述了基于表面势模型的建模思想、特点和在电路模拟中的优越性。
Some typical surface potential based models were studied, the principle of those models were discussed, and the characteristics and advantages of them were analyzed.
针对脉动喷嘴的结构对形成脉冲流体的机理进行了电路模拟分析,从而避开了直接对流体流场的计算及边界条件的处理。
The pulse fluid mechanism is analyzed with circuit simulation on the basis of the structure of pulse nozzle. which will directly avoid calculating the fluid yard and treating the boundary conditions.
利用HSPICE电路模拟软件,对ESD保护结构进行了集总参数模拟,获得了保护结构在ESD事件中的功率和温度分布。
Both the power and temperature distributions of an ESD protection structure during an ESD event are obtained using HSPICE.
研究了正交排布的碳纤维吸波复合材料的微波吸收特性,结果表明这种类似电路模拟材料的排布方式可使材料获得优异的吸波性能。
Microwave absorbing properties of circuit analog materials produced by carbon fiber were studied. The composites showed excellent results at the condition of this arrangement.
并且给出了计入串联电阻影响后进行电流电压方程参数提取的方法,以便把共振隧穿二极管直流模型加入电路模拟软件中进行电路设计。
In order to add the DC model of RTD into SPICE circuit simulator and design RTD circuits, parameters of current-voltage equation were extracted after considering the effect of series resistance.
介绍了一套砷化镓专用电路CAD软件,它可完成砷化镓器件模拟、器件模型参数提取、电路模拟、版图编辑、PG带生成的全过程设计。
The paper describes a CAD tool, it can perform GaAs device simulation, device parameter abstraction, circuit simulation, layout edition and PG tape generation.
该文以HSPICE电路模拟程序为电路模拟的基础,以改进的热点温度估算方法为热学模拟的基础,采用解耦法实现了集成电路的电热耦合时序模拟软件。
The HSPICE circuit simulator and an improved hot spot thermal analysis method were used in a new fast electro thermal relaxation method to study the self heating effects.
自从经典计算机开始出现,模拟电子电路以促进更快的计算机的设计就一直是其任务之一。
One of the tasks of classical computers since their inception as been to simulate electrical circuits to help design faster computers.
例如,电路可以模拟出乳糖代谢基因与调节细菌细胞内乳糖代谢基因表达的转录因子之间的互动过程。
For example, circuits can simulate the interactions between genes involved in lactose metabolism and the transcription factors that regulate their expression in bacterial cells.
另外,美国系统将支持集成电路设计和模拟测试,数字和射频应用。
Also, American Systems will support integrated circuit design and testing for analog, digital and radio frequency applications.
应用推荐