探索两电极电压钳技术在非本征离子受体研究中的应用。
Explore the application of the two-electrode voltage-clamp technique in the studies of the extrinsic ionotropic receptor.
探索两电极电压钳技术在外源性促离子型受体表达研究中的应用。
Explore the application of the two-electrode voltage-clamp technique in the studies of the extrinsic ionotropic receptor expressed.
方法采用标准微电极及双微电极电压钳技术。
METHODS standard microelectrode and two microelectrodes voltage clamp techniques were used.
用双电极电压钳记录。
在用这种方法给汽油荷电时，电极电压和汽油流量影响着荷电量的大小。
When this method is applied, the quantity of electricity is found to be affected by voltage between electrodes and gasoline flow.
本文通过对电阻点焊电极电压动态特性的分析，研究了低碳钢及低合金高强度钢电阻点焊的质量问题。
The quality of resistance spot welding of low carbon steel and high strength low alloy steel is studied by looking into the dynamic voltage characteristics of the electrodes.
方法应用双电极电压钳技术分别在带滤泡膜及去滤泡膜后注入RNA并经孵育的卵母细胞记录膜电流。
Methods Dual-electrode voltage clamp technique was used to record membrane currents from follicular oocytes, and defolliculated oocytes that had been injected with alien RNA and incubated.
激光相控阵雷达是一种结合激光雷达与相控阵技术的新体制雷达，采用电控电极电压实现光束控制和扫描。
Laser phased array radar is new system radar combining with laser radar and phased array technology. It controls the beam by electrically addressing electrodes.
其中O型和L型结构的激励器受电极电压的影响比较明显，随着电极电压的增加，射流速度的最大值增大。
The jet flow velocities of the O-type and L-type are obviously affected by the excitation voltage; they increase with the increase of the excitation voltage.
随着来流速度的增加，等离子体的作用效果有所减弱，通过提高电极电压来提高电场强度，可以有效的提高其作用效果。
With the rise of the incoming flow velocity, the plasma effect decreases. So in order to obtain an effective flow control using plasma, the intensity of the electric field must be strengthened.
采用双微电极电压钳制术研究3，6-（二甲氨基）-二苯骈碘杂环依地酸盐（IHC-72）对家兔浦肯野纤维慢钙通道的影响。
The effect of 3, 6-dimethylamino-dibenzopyriodonium edetae(IHC-72) on the slow calcium channel of isolated rabbit purkinje fibers was studied with two microelectrode voltage clamp technique.
他有一根装着电极的管子，里面充满了氢原子。通过施加电压，他能够使气体发光。
He had a tube with electrodes potted in it filled with atomic hydrogen. And by applying a voltage, he was able to get the gas to glow.
这种新材料具有高能量密度，因为它能够以比目前更高的电压的电极材料储存更多的锂离子个单一的百分比数字。
The new material has such high energy density because it can operate at a higher voltage than current electrode materials and also store more lithium ions.
在电极之间用一个电压同时会使块上胶囊的粒子上产生一个位移，这样就改变了它的颜色。
Applying a voltage between the electrodes causes a simultaneous shift in the particles in all the capsules in a block, thus changing its colour.
当没有电流流通时，电极之间的电压差驱动电子反方向流动。
When no electricity is delivered, a voltage difference between the electrodes drives a current in the other direction.
加载电压时，正负电荷分别在两个电极上聚集，生成一股挤压聚合物的引力。
When a voltage is applied, positive charge builds up on one electrode and negative charge on the other, creating an attractive force that squeezes the polymer.
当我们增大两个电极之间电压,我们有-我们可以把氢气2,分解成单个的氢原子，不仅这样，还能激发原子。
When we increase the potential between the 2 electrodes that we have in the tube -- we actually split the h 2 into the individual hydrogen atoms, and not only do that, but also excite the atoms.
这样，就意味着巧妙的工程学能够在电压不变的情况下通过增加电极间表面积以提高电荷储备。
This, in turn, means clever engineering can increase the surface area (and thus the storage capacity) without increasing the volume.
碳块中有两个彼此间隔的电极，任意高于设计标准的电压都可以跨过电线入地。
The carbon block consists of two electrodes spaced so that any voltage above the design level is arced from line to ground.
电晕放电：这是一个非热放电产生的应用高电压急剧电极秘诀。
Corona discharge: this is a non-thermal discharge generated by the application of high voltage to sharp electrode tips.
放电管：装有低压气体的封闭绝缘容器，当电极有足够的电压时，通过它电流就开始流动。
Discharge tube: a closed insulating vessel containing a gas at low pressure through which an electric current flows when sufficient voltage is applied to its electrodes.
使每个连续的光电倍增管电极的电压都比它前面一个电极的电压更高，这样电子就得到加速。
Electrons are accelerated by making the voltage of each successive dynode of the tube more positive than the previous one.
火花由电弧产生，是由经过火花塞电极的高电压形成的。
The spark consists of an electric are produced by applying a high voltage across the electrodes of a spark plug.
做到这一点最容易的方法是给整个光电倍增管的两端加上一个电压，然后从一个分压器的各个抽头取得供给各个倍增管电极的电压，如图4 - 13所示。
The easiest way to accomplish this is to apply a potential across the entire tube and tap the dynode voltages off a voltage divider, as shown in Figure 4-13.
两个柱状的铝电极间隔约50纳米，当电压加在这两个电极之间时，它们就会相互通电。
When a voltage is applied across two beamlike electrodes made of aluminium, which are separated by a gap of around 50 nanometres.
火花由在中心电极和旁电极之间的高电压(大约6千伏到40千伏)产生。
A spark is produced by applying a high voltage (from approximately 6 KV to 40 KV) between the center electrode and ground.
否则，从电池电极吸取的电流将会在电极的内阻上产生电压降并可能使电池极化。
Otherwise, the current drawn from the cell electrodes will cause a voltage drop across the internal resistance of the electrode and may polarize the cell.
适当下移触发电极可明显增大可控击穿电压范围。
Moving triggering electrode down suitably can widen the range of breakdown voltage.
考察了激光取样、辅助火花放电电压、电极尖端距离等条件变化时对分析结果的影响。
The influence of laser sampling, auxiliary spark discharge voltage, and electrode point gap on analytical results was examined.
考察了激光取样、辅助火花放电电压、电极尖端距离等条件变化时对分析结果的影响。
The influence of laser sampling, auxiliary spark discharge voltage, and electrode point gap on analytical results was examined.
应用推荐