电加热或煤气加热供用户选择。
Heating, electricity or heating gas heating for users to choose.
介绍了一台锻锤用煤气加热炉的设计、施工及使用情况。
Design, construction and using of a gas heating furnace for hammer forging have been introduced.
叙述了锻造用室状煤气加热炉的设计特点及其实际应用。
The designing characters and the application of the gas heating room-form furnace with automatic control used for forging process were proposed.
在1963年，我们使用了内燃真空燃烧器的煤气加热系统。
In 1963, we evaluated an infrared vacuum combustion, gas heating system.
有电加热、蒸汽加热、煤气加热、天燃气加热四种加热方式。
With four heating style choices, they are steam heating, gas heating, diesel heating and eletric heating styles.
为了节能降耗，萍乡钢铁棒材有限公司使用高效蓄热式高炉煤气加热炉。
In order to save energy, the high efficacy stored heat furnace used blast furnace gas is applied in Pingxiang Iron and Steel Co.
焦炉使用发生炉煤气加热时，炉头温度较低，采用补充加热的方法提高炉头温度。
This article discussed that the coke oven was revamped by auxiliary heating to raise the temperature of furnace end for gas generator.
结合高炉煤气加热特点，介绍了焦炉自动加热的人工智能设计模式和自动控制效果。
In combination with the feature of blast furnace gas heating, described the manual intelligent design mode for coke oven automatic heating and automatic control effect.
介绍X -R控制图的基本控制原理，并运用该原理对煤气加热炉的温度进行控制。
To introduce the control principle of X-R control chart, and use the principle to control the temperature of coal gas heating furnace.
采用宏观和微观分析法对350MW燃气轮机组煤气加热器盲板螺栓断裂进行了系统的表征分析。
The fracture of blind plate bolts on a coal gas heater of 350 MW gas turbine unit were systematically characterized and analyzed by a series of macroscopic and microscopic analysis methods.
本文设计了以8098单片机为核心的煤气加热炉温度控制系统，它可实现数据采集、数据显示以及报警预处理。
This paper was designed to 8098 microcontroller as the core gas furnace temperature control system, it can achieve data collection, data and alarm pretreatment.
工作内容主要是对房屋进行查验，包括房屋的加热系统、煤气管道、污水处理系统、窗户玻璃，甚至还包括房屋的空气质量等等。
Instead, as part of his job, he visits newly decorated apartments to inspect the heating systems, gas pipes, sewage systems, window glasses and even the air quality in rooms.
介绍了加热炉在使用转炉煤气作为燃料时，对其流量、压力、加热温度和纯洁度的要求。
The requirement to flow, pressure, heating temperature and purity of converter gas used in reheating furnace were introduced.
高炉煤气用来加热很有用。但它含有大量的灰尘，所以在用作燃料之前必须经过除尘。
The gas from blast furnace is useful for heating purpose. But it contains a considerable amount of dust, so it must be cleaned before used as a fuel.
取代反射炉、煤气发生炉等，加热无明火产生，符合国家消防安全条例。
Replace the reverberatory furnace and gas producer etc. , there is no light fire producing when heating, and it accords with national fire protection safety rules.
煤气双缸交换机的电气装置是控制驱动焦炉中加热调节装置的关键设备。
The electric installation of gas double VAT exchanging machine is the key equipment in heat regulating of control driving in the coke stove.
同时，以单一高炉煤气为主燃料，辅以其它燃烧系统，是提高加热能力的重要途径。
The important alternative way to increase heating capacity is to use single BF gas as main fuel and at same time adopt other auxiliary combustion systems.
另外，用直接蒸汽加热接触器以脱出酸性气体，并将酸性气体引入煤气系统，对于减缓腐蚀十分必要。
In addition, for corrosion reducing and retarding, it is necessary to use steam directly to heat contactor to remove acidic vapor and to lead acidic vapor into gas system.
介绍了采用炼铁副产品高炉煤气为加热炉燃料的应用情况，总结了经验和教训。
This paper introduces that the blast furnace gas is used heating furnace, and summarizes serval experience.
实践证明，轧钢加热炉使用转炉煤气是可行的。
The practical production show that the converter gas can be used in reheating furnace of steel rolling.
烟道中煤气的燃烧和空气的预热是循环进行的，当某些烟道正燃烧煤气时，另一些烟道则在加热导入的供燃烧用的空气。
The gas burning and air preheating procedure in flues operates on a cyclic basis in which some flues are burning gas and others are giving up their heat to incoming combustion air.
用来加热的燃料不是高炉煤气就是焦炉煤气。燃烧用风通常要预热，以提高燃料的利用率。
The fuel used for heating is either blast furnace gas or coke oven gas. The combustion air is always preheated to improve fuel utilization.
提出了焦炉加热煤气管道设计的新方案。
In this paper, a new design of coke oven heating gas pipe is presented.
用来加热的燃料不是高炉煤气就是焦炉煤气。燃烧用风通常要预热，以提高燃料的利用率。
The fuel used for heating is either furnace gas or coke oven gas. Thecombustion air is always preheated to improve fuel utilization.
介绍燃热脏煤气在特钢加热炉上存在的问题和蓄热式燃烧技术在燃发生炉热脏煤气特钢加热炉上应用。
This paper introduces the problem of the hot coal gas used in the heating furnace and the application of the regenerative combustion in the heating furnace burning the hot coal gas.
文章介绍了气体和液体燃料用于工业加热的一些基本特性，以及对工业加热设备的燃料从人工煤气或油向天然气转换时，设备应做的调整。
The Author describes some characteristics of gas fuel and liquid fuel for industry heating, and necessary adjustment of related facilities converting from MG or oil to ng.
高炉煤气作为高温加热炉单一燃料是节约能源和改善环保的重要技术措施。
The blast furnace gas as fuel of high temperature reheating furnace is an important technology for energy-saving and environmental protection.
高炉煤气作为高温加热炉单一燃料是节约能源和改善环保的重要技术措施。
The blast furnace gas as fuel of high temperature reheating furnace is an important technology for energy-saving and environmental protection.
应用推荐