改性磷酸盐玻璃体系的热膨胀系数明显偏低;
The thermal expand coefficient of modified phosphate glass system is lower than required in SOFC.
接合后存在残余应力起因于材料的热膨胀系数。
After jointing, coefficient of expansion leads to remain force.
结果表明,烧后试样的热膨胀系数比未烧的高;
The results showed that the coefficients of thermal expansion(CTE) of as-sintered samples were higher than those of green samples .
性能测试包括热膨胀系数、差热曲线和电性能等。
The thermal expansion coefficient DTA and electrical properties were also investigated.
通过调整这两个参数,可以获得接近零的热膨胀系数。
By adjusting these two parameters, can be near zero coefficient of thermal expansion.
设计完成对复合材料的热膨胀系数的计算和预测功能。
Designed to complete the composite coefficient of thermal expansion of the calculation and prediction functions.
研究结果表明,纳米晶体线越细,其热膨胀系数越大。
The results show that the thinner crystal nano-wire has a larger thermal expansion coefficient.
建立了一种细观力学模型用于预报复合材料的有效热膨胀系数。
A micromechanical model was proposed to predict the thermal expansion coefficient of composite.
在本研究中,还试图通过添加外加剂来降低堇青石的热膨胀系数。
During the study we tried to lower the thermal expansion coefficient of cordierite by adding additives.
氮化铝的热膨胀系数与硅的十分接近,因此不会引入大的热应力。
Since coefficients of thermal expansion between aluminum nitride and silicon are near, large thermal stress will not be introduced.
分析了激光云纹干涉法测量高温材料热膨胀系数的原理和可行性。
The theory and feasibility is analyzed, for measuring Linear Expansion Coefficient of high temperature material by moiré interferometry.
叶蜡石矿物与杂质矿物热膨胀系数绝缘程度应相近,并呈交织结构。
The thermal expansion parameter of pyrophyllite mineral should close to that of the impurity minerals and show intertexture structure.
本文对陶瓷结合剂磨具热膨胀系数测定条件及影响因素进行了研究。
In this paper, the measuring conditions of dilatometry for vitrified bond grinding tools were investigated.
基于细观力学方法建立了两种预测单向复合材料的热膨胀系数的方法。
Two methods are established to predict the thermal expansion coefficient of Unidirectional composite based on micro-mechanics.
从碟形双金属片的两块不同金属的热膨胀系数出发,设计了计算模型。
Proceed from different heat coefficient of expansion of two different metals for thermal bimetals with dish shape, the calculation modul was given.
相较于金属和热塑材料,什么材料具有更高的热膨胀系数(CTE) ?
In contrast with metal and thermoplastic material, which has a higher coefficient of thermal expansion (CTE).
在相对简单的实验设备下,得到较高精度金属复合引线的热膨胀系数值。
High precision CTE of the metal composite leads can be got with the relatively simple experimental equipments.
铸铁与水泥热膨胀系数不同,长时间就会变形、分离,在外力作用下翻开。
Cast iron is different from cement thermal expansion coefficient, will transform, separate with long hours, over - towing force action descend turn over the turn on.
更具体地,该焊接端的热膨胀系数大于该放电端和基本电极的热膨胀系数。
More specifically, the weld end has a coefficient of thermal expansion which is greater than the coefficients of thermal expansion for the discharge end and base electrode.
这个发现与基于间隔条材料与浮法玻璃之间热膨胀系数差异而预期的性能一致。
This finding is in keeping with the expected performance based on the difference in thermal expansion coefficients between spacer material and float glass.
本文推导了单向混杂复合材料热膨胀系数的理论估算公式,并进行了实验验证。
In this paper, the estimate formula of the coefficient of thermal expansin (CTE) of unidirection hybrid composites is presented, and validated by experiments.
文章利用解析法研究了材料热膨胀系数对温度场中太阳电池板最大应力的影响。
The effect of thermal property on the stress distribution in solar panel in thermal field is studied analytically.
本文研究了氧化锂加入量对低温熔块的熔融温度、力学性能、热膨胀系数的影响。
The influences of lithia content on the melting temperature, mechanical properties and thermal expansion coefficient of low temperature frit were studied.
例如,使用热膨胀系数小的玻璃可以允许部件焊接在一起从而形成连续的一整块玻璃。
Using a glass that does not expand much when heated, for example, would enable components to be welded together, forming, in effect, a continuous piece of glass.
该焊接端具有一个热膨胀系数,其不在该放电端和基本电极的热膨胀系数的值之间。
The weld end has a coefficient of thermal expansion, which is not between the values for the coefficients of thermal expansion for the discharge end and the base electrode.
结果表明,D1和单基药的热膨胀系数有较大的差异,中止燃烧破孔率常温小于低温。
Results show that the linear expansion coefficients of D1 has large difference with that of single-base propellant.
合成材料具有更好的承载能力,更低的热膨胀系数,更好的耐磨性和更好的抗疲劳性能。
The composite material has resulted in greater load carrying capacity, a reduced thermal expansion, greater wear resistance and fatigue endurance.
本文研究了水泥石线性热膨胀系数的测试方法,并针对本试验方法制定了相关的试验制度。
In this paper, the test method of the linear thermal expansion coefficient of hardened cement paste is studied.
研究了单向混杂复合材料热膨胀系数随混杂比、混杂界面数及铺层顺序等参数变化的规律。
The variation of CTE values of the unidirectional hybrid composites with hybrid ratio, hybrid interfaces and ply order is studied.
研究了单向混杂复合材料热膨胀系数随混杂比、混杂界面数及铺层顺序等参数变化的规律。
The variation of CTE values of the unidirectional hybrid composites with hybrid ratio, hybrid interfaces and ply order is studied.
应用推荐