并给出了基于可调隔热板的准恒温燃烧的热态试验部分结果。
Some hot state test data of quasi isothermal combustion with adjustable heat insulation boards are presented as well.
介绍了聚酯反应器热态试验装置的设计、制造与试验运行过程。
The design, manufacture, and test run of the hot test units for polyester reactors were presented.
在自行研制的热态试验炉上对圆孔型铜冷却壁进行了热模拟试验。
The hot test of the copper cooling stave with circular channels was done in the test furnace designed by the authors.
对电弧炉炼钢用集束射流氧枪的射流特性进行了冷态和热态试验。
The cold test and thermal test for the jet characteristics of coherent jet oxygen lance have been carried out.
数据处理中，考虑了热态试验过程中，金属被氧化而增加的重量。
The additional weight due to metal oxidation in the test process is considered in test data processing.
热态试验表明，竖炉用含碳铬矿球团可以冶炼出含铬20%的铬铁合金。
Smelting test showed that an alloy contained 20% Cr can be produced by shaft furnace with carbon bearing chrome-ore pellets.
热态试验表明，竖炉用含碳铬矿球团可以冶炼出含铬20%的铬铁合金。
Smelting test showed that an alloy contained 20% Cr can be produced by shaft furnace wit...
热态试验表明，竖炉用含碳铬矿球团可以冶炼出含铬20%的铬铁合金。
Smelting test showed that an alloy contained 20% Cr can be produced by shaft furnace with carbon bearing c...
该文以热天平和半工业性热态试验系统对高钙煤灰增湿脱硫过程进行了研究。
The experiments on humidification desulfurization by high calcium coal ash were carried out at a thermo balance and a semi industrial test ring.
煤氧竖炉熔化废钢的热态试验研究表明：采用煤氧竖炉熔化废钢在工艺上是可行的。
The experimental research presented in this paper shows that scrap melting with coal-oxygen shaft furnace is technological feasible.
在小型滴管炉内进行了采用生物质废弃物作为再燃燃料还原模拟烟气中NO的热态试验。
Adopting biological wastes as reburning fuel to reduce NO in simulated gas, hot test has been carried out in a small dropper tube furnace.
本文介绍了用于立式自然循环蒸汽发生器的同心立式波形板汽水分离器的冷、热态试验结果。
This paper presents the test results of cold and hot state for concentric ver-tical shutter steam separator used in vertical natural circulation steam generators.
通过训练冷却壁热态试验数据样本，得出了基于参数修正因子的高炉冷却壁的智能仿真模型。
The intelligent simulation model of blast furnace cast steel stave based on correction factor of parameters obtained by training the samples of test data of cast steel stave.
设计了中心给粉旋流煤粉燃烧器，并进行了实验室冷态试验、现场空气动力场试验和热态试验。
Design central coal feeding swirl burner and carry on laboratory test while being cool, on-the-spot air power field test and test while being hot.
设计并建造了冷却壁热态试验系统，对铸钢冷却壁和球墨铸铁冷却壁的换热效果进行了工业模拟试验。
The thermal test system of cooling stave was designed and established to put up the industrial experiment of the heat transfer for the cast steel cooling stave and ductile iron cooling stave.
本文经过大量的调研和仔细的设计、完善，建成了具有空气分级、燃料再燃等多种用途的一维热态试验系统。
After a lot of survey and careful design work, a one-dimensional test system with multi-function such as air stage and fuel reburning is built up.
本文采用热态试验和数学模拟的方法，研究了金属板坯在快速冲击加热炉内被射流冲击加热时的内外部传热机构。
The mechanism of heat transfer during sheet metals heating with impinging jet in a rapid heating furnace is studied with experiments and mathematical simulating methods.
热态试验结果表明，铸铜冷却壁与轧制铜冷却壁在热态性能上没有大的区别，冷却能力很好，壁体与埋管间没有气隙热阻。
The result shows that there is no difference in thermal properties between cast copper stave and rolled copper stave. The cooling capacity of cast one is very good.
以铸钢冷却壁的传热为研究对象，根据热态试验结果，提出简化传热关系式，并将其与神经网络技术相结合，形成冷却壁热面温度预测仿真模型。
Heat transfer of cast steel cooling stave is the research object, and simplified heat transfer formula is proposed based on thermal state test results.
着重介绍了在高温高压水试验台上进行的立式蒸汽发生器汽水分离装置的热态考核试验。
The article puts emphasis on the qualification test of the steam-water separating device at hot conditions in a high temperature and pressure water test rig.
对一种新型流化床热处理电炉的流化特性，热态升温特性及电特性进行了试验研究。
This paper studied the characteristics of fluidization, eating up and electricity on a new-type fluidized bed heat treatment resistance furnace.
用三种试验方法对被测量的热态电阻进行了检验，证明仪器具有较好的测量精度和稳定性。
Three testing ways are used for examining the measured hot resistance. Data make know the instrument having a good measurement precision and stability.
风帽的实际运行证明冷态模化试验基本上能够准确预报布风板热态流阻特性参数，实际布风板可以参考冷态试验所得参数进行风帽设计和性能预测。
The results from cold model testing are proved to be authentic and provide a basis for design of caps in large scale circulating fluidized bed boiler.
本文介绍了摆动式燃烧器短喷嘴结构冷态模拟试验结果，以及中间工业试验和热态运行试验结果。
In this article, the test results of a tilting burner with short nozzle on a cold model, in a pilot plant and under actual operating conditions are presented.
通过两种结构烧嘴的热态燃烧试验对比，研究了烧嘴结构、燃气射流速度、过量空气系数对高温空气燃烧过程氮氧化物排放的影响特性。
The effects of nozzle structure, fuel gas injection velocity and excess air coefficient on NOx emission in high temperature air combustion were investigated.
在袋式除尘器冷、热态性能试验研究的基础上，分析了袋式除尘器冷、热态运行时的阻力变化规律，论述了除尘器阻力对锅炉系统运行的影响，提出了降低袋式除尘器运行阻力的调整措施。
The influence of the resistance force on the boiler system operation is discussed, and measures to reduce the operational resistance force for the bag dust collector were put forward.
通过试验分析，探索了煤直接液化残渣采用热态、小批量连续进料炼焦工艺的可行性。
The feasibility of thermal state continuative feeding coking process with coal liquefaction residue was discussed through experiment study.
对原始组织为铸态和热轧态的2205双相不锈钢试样进行了不同条件下的固溶处理热模拟试验。
The solution treatments were performed with the specimens of 2205 duplex stainless steel, which possessed different initial microstructures.
对原始组织为铸态和热轧态的2205双相不锈钢试样进行了不同条件下的固溶处理热模拟试验。
The solution treatments were performed with the specimens of 2205 duplex stainless steel, which possessed different initial microstructures.
应用推荐