烧结助剂是影响氮化硅陶瓷的显微结构和性能的关键因素之一。
Sintering AIDS were one of key factors affecting microstructure and properties of silicon nitride ceramics.
烧结烟气脱硫石膏的质量是石膏综合利用的关键因素之一。
Quality of sintering flue gas desulfurization (FGD) gypsum is one of the key factors in FGD gypsum utilization.
介绍了用于烧结机械零件、电焊条和其它领域的水雾化纯铁粉的生产工艺,产品性能及其性能变化的影响因素。
Production process, properties and factors affecting their performance of water atomized iron powder used for sintered machine parts, welding electrodes and other fields were introduced.
分析了燃料粒度对烧结生产的作用、影响燃料粒级优化的主要因素,结合生产实践提出了改进措施。
The role of fuel particle size to sinter production is introduced as well as the main factors to affect it. The improving measures are proposed.
烧结块软化点是影响密闭鼓风炉熔炼过程的一个关键因素。
The softening point of sinter is a key factor that affects the smelting process of Imperial smelting Furnace (ISF).
通过扫描电镜分析,研究了厚膜铂电阻浆料在烘干、烧结过程中微观结构的变化,讨论了烧结过程中对膜层致密度的影响因素。
Changes of microstructure of the thick film platinum resistance paste during drying and sintering were studied by SEM. The main factors influencing tightness of the sintered membrane were discussed.
烧结过程中,混合料水分,是影响烧结过程的一个重要因素。
The moisture of mixture in this process is an important factor that affects sinter process.
探讨了原料配比、粒度以及配料烧结温度、时间等工艺因素对贫铝矾土中氧化铝的提取率的影响。
This article studies the main factors affecting the extract ratio of aluminum including the ratio of raw material, particle size, broiled temperature, and broiled time and so on.
在所有的影响因素中,WC总碳和烧结温度是影响合金性能的最重要因素。
Of all factors, WC general carbon and sintering temperature are the most important factors which have much effects on material performance.
铁矿石的铁酸钙生成特性是烧结配矿必须考虑的因素,对优化配矿具有重要的指导作用。
The CF producing characteristics of iron ore is an important factor for sintering mixture and it has a directing action for optimizing mixture.
煤灰的烧结和熔融是电站锅炉灰沉积的重要过程,熔体的结构特性是沉积物生长和强度形成的决定性因素。
Sintering and melting of coal ash is a key process of ash deposition in furnace of utility boilers. Melt structure characteristics is a determining factor in deposit growth and strength development.
通过烧结杯试验和对转鼓指数的测定研究了铁料、碱度、燃料消耗和水分等因素对水钢烧结强度的影响。
The influence of iron materials, alkalinity, fuel consumption and moisture on sinter strength were studied through the sintering cup test and the drum index test.
在回转窑中进行的焙烧是球团烧结过程中最重要的阶段,故窑温的控制成为关键因素。
The roasting in the kiln is the most important stage during the process of the pellet sintering, so the control of the kiln's temperature is the key factor.
论述了镁法海绵钛生产过程中高温烧结的形成及其影响因素,分析了减少高温烧结的控制措施。
Formation and influential factors of high temperature sintering in titanium sponge production by magnesium reduction method were analyzed.
烧结返矿是烧结过程中的重要因素之一,在烧结混合原料中加入烧结返矿可以提高烧结矿的产量和质量。
The return mines of sintering is one of the important factors in sintering process. Output and quality can be raised by adding return mines to mix raw materials of sintering.
文章首先介绍了环式冷却机的工作原理和影响烧结矿冷却的因素,分析了影响环式冷却机工作效率的主要原因;
The article first introduces the working principle of the ring cooler and the factors affecting the sinter cooling, then analyzes the main reasons for affecting the efficiency of the circular cooler;
实验可知,油尼龙的制备与复合烧结温度是实验成败的决定因素。
Based on the experiment we can include that the preparation of oil-cast nylon and the sintered temperature of composite is the pacing factor.
烧结矿返粉率是影响铁前区成本的重要因素之一。
The return fine rate of sintered ore is an important factor to influence production cost of before iron making process.
降低烧结机漏风率是提高烧结机产能的重要因素。
Reducing the air leak rate is one of the most major methods to raise production capacity of sintering machine.
探讨了原料配比、粒度以及配料烧结温度、时间等工艺因素对贫铝矾土中氧化铝的提取效率的影响。
This article studies the main factors, which affect the extract ratio of aluminum oxide from lean alumina ore, such as the ratio of raw material, particle size, broiled temperature, and broiled time.
考虑不同因素的影响,建立了反应烧结碳化硅反应烧结过程的一组数学模型,它们可表述为一个拟线性的抛物型方程。
Several mathematical models for reaction process of reaction bonded silicon carbide are set up, which are quasi linear parabolic systems.
实验发现,在液相粘度较高、表面张力大,熔体材料不浸润固相颗粒和基板等因素的影响下,烧结过程中出现了球化现象。球化的出现妨碍了直接金属激光烧结成形的顺利进行。
During the laser sintering, due to the large liquid phase viscosity and surface tension, the balling effect occurred when the molten did not wet the solid metal particle and the underlying substrate.
降低损最主要的因素是:减少烧结机和冷却机的漏风率以及设置适宜的冷却废气流量和冷却机内料层厚度。
It is the key approach to reduce exergy loss to reduce the air leakage rate of sinter strand and cooler, to set desirable flow rate of cooling gas and sinter thickness in the cooler.
降低损最主要的因素是:减少烧结机和冷却机的漏风率以及设置适宜的冷却废气流量和冷却机内料层厚度。
It is the key approach to reduce exergy loss to reduce the air leakage rate of sinter strand and cooler, to set desirable flow rate of cooling gas and sinter thickness in the cooler.
应用推荐