液晶显示模块与全面读200mV。
各种液晶显示模块铁框。
同时，我们还生产各款标准型液晶显示模块。
At the same time, we also produce sections of standard LCD modules.
数据显示采用液晶显示模块，人机界面友好；
The display of data using liquid crystal display module, the interface is friendly;
液晶显示模块直观的显示系统各种参数及状态。
The LCD module shows parameters and the state signal of system.
液晶显示模块具有功耗低、体积小、超薄等特点。
LCD has low power dissipation, small volume, and is ultrathin.
键盘输入及液晶显示模块，提供了友好的人机界面。
A friendly human-machine interface is provided by keyboard input and LCD module.
介绍了液晶显示模块的组成原理及显示软件的设计方法。
The composition of liquid crystal display module and the designing method of display software and described.
硬件介绍了系统构成，着重介绍多按键输入和液晶显示模块；
For its hardware'the basic structure of the design is discussed'focused on the keyboard and LCD display.
后者又可分为两种：字符型液晶显示模块和图形液晶显示模块。
The latter can be divided into two types: character LCD modules and graphics LCD modules.
此外壳则具有第二卡合部供连接于第一卡合部，以固定液晶显示模块。
The outer shell is provided with a second clamp part for connecting to the first clamp part, which aims at fixing the liquid crystal display module.
介绍一种字符体液晶显示模块CCM- 1 61 B2在速度表中的应用。
使用MGLS- 240128t图形点阵液晶显示模块来进行显示，界面友好。
The graphics lattice liquid crystal module MGLS-240128T is used to display information, and the interface is friendly.
根据显示方式和内容的不同，常用于仪器仪表上的液晶显示模块有笔段型和点阵型两类。
According to show the different ways and content, commonly used in the instrumentation on the liquid crystal display modules and a T-point formation of two types.
应用FPGA技术实现了对RT12864M汉字图形点阵液晶显示模块的驱动和控制。
The RT12864M is driven and controlled with FPGA technology in order to realize the manifestation of Chinese characters.
设计了液晶显示模块和32位微机实验系统的接口电路，编制了液晶显示模块的驱动程序。
Show module and 32 bits of interface circuit of experimental system of computer after designing the liquid crystal, have worked out the driver that the liquid crystal shows the module.
特殊的功能，有些型号：包括服务区间复位，组成活化，活出数据，液晶显示模块读，同步。
Special functions for some models: Including service interval reset, component activation, live data, LCM reading, sync.
系统设有多种传感器接口，增加了液晶显示模块，实时显示机器人的运行状态和运行参数。
Many kinds of interface of the sensor are designed in the system, and it also adds LCD, which can display real-time running state and parameters of the robot.
数据显示部分用液晶显示模块以节省电池的耗电量，显示器与单片机的接口为串行通信接口。
Data show USES LCD module in order to save battery power and the interface of display and microcontroller is serial communication interface.
介绍一种用80C196KC实现液晶显示模块DMF50174图文显示的软硬件设计方法。
This paper introduces a design method of hardware and software of usage of LCD module-DMF50174 controlled by 80C196KC.
系统采用DSP和FPGA协同控制的模式，实现了同液晶显示模块及键盘的软、硬件接口设计。
Based on the mode of DSP cooperating with FPGA, the interfaces of hardware and software are realized for LCD module and keyboard.
液晶显示模块的采用使得语音终端硬件设计简单，同时汉字和菜单显示技术的使用使得用户界面更加美观。
The hardware design of speech terminal is simple with a LCD module, while the user interface is more beautiful with the technology of chinese character and menu display.
智能涡街流量计系统由涡街传感器、温度传感器、压力传感器、液晶显示模块、主控制器等几个部分组成。
The intelligence vortex flowmeter system is consisted of vortex sensor, temperature sensor, pressure sensor, LCD module and master controller, etc.
使用SPLC501C液晶显示模块实现了菜单的转换功能，且给出了显示菜单转换的液晶显示模块驱动程序。
Menus transition is achieved by using SPLC501C liquid crystal and display driver for menus transition is given.
通过T6963 C控制器的液晶显示模块在医用分析仪器上的使用实例，比较了使用该控制器的液晶图形模块时的不同硬件接口形式。
With the examples of use in medical instruments about LCD display module based on inner T6963 controller, two diverse hardware interface forms when using the controller were discussed.
使用者只要向液晶显示模块中送入相应的命令和数据就可以实现所需要的显示…这种模块与CPU能很容易地接口，使用起来特别灵活方便。
Users just have to send corresponding orders and datas to the LCM and it will display what you want. It is flexible and convenient for using because of connecting with the CPU easily.
本文以内藏液晶显示控制器（T6963C）的液晶显示模块为例，介绍了其在DSP测控系统中与DSP芯片（TMS320C542）的软件和硬件接口形式。
The article takes the LCD module of T6963C controler with built-in LCD for example, presenting its software and hardware interface with DSP(TMS320C542) in DSP application.
以应用广泛的MSC -G12 864液晶显示模块为例，在简单介绍内部结构与操作方法的基础上，讨论了其与单片机的接口以及相应的C5 1编程方法和程序。
Presents the internal configuration of LCD module MSC-G12864 and its operation method. On these, discuss the interface with MCU and gives out programming method and some C51 program.
以应用广泛的MSC -G12 864液晶显示模块为例，在简单介绍内部结构与操作方法的基础上，讨论了其与单片机的接口以及相应的C5 1编程方法和程序。
Presents the internal configuration of LCD module MSC-G12864 and its operation method. On these, discuss the interface with MCU and gives out programming method and some C51 program.
应用推荐