用热线风速仪测量了常规层燃炉炉膛和带有偶极子涡流器的炉膛模型拱区的三维速度场。
In this paper, the 3 D velocity fields in the furnaces' arch area for a conventional stock boiler and the model with dipole vortex device were measured by the hot wire aerometer.
航空喷气发动机燃烧室中广泛采用叶片涡流器来控制火焰筒的一次空气流量，并建立强回流区。
The blade-type swirlers have been used in many air engine combustors to control the primary airflow of flame tube and establish a strong recirculation zone.
试验研究了主、径向涡流器旋流数、面积比、套筒扩张角等参数对双旋流进气装置冷态流场的影响。
The effects of swirl number of primary swirler and radial swirler, area ratio and sleeve divergence angle on the cold flow field of double swirl air intake were investigated.
当潜水器以一定的角度接近当前水流时，压力传感器检测到涡流的形成，并启动气缸开始旋转。
When the submersible heads at an Angle into the oncoming flow, the pressure sensors detect the formation of eddies and start the small cylinders spinning.
这个创意是通过调节涡流增压器的结构来使它与引擎尾气排放同步，从而达到更好的能量回收效果。
The idea is to oscillate the turbocharger's variable geometry and synchronise it with the engine exhaust to get better energy recovery from the pulsating exhaust flow.
涡流增压器采用了一个快速响应喷头来跟踪尾气脉冲，减少内燃机的进气周期，从而增加尾气排放压力。
It USES a fast actuated nozzle to follow the exhaust pulse, reducing the turbine inlet area periodically to increase exhaust-gas pressure.
当手动产生的涡流从水箱中流过时，4个传感器测出了其压力。
Four sensors measured pressure as hand-generated eddies swirled through the tank.
本文提出了一种基于电涡流传感器的双探头测量电机硅钢片轧板厚度以控制铁心叠厚的方法。
This paper presents a feasible solution of motor core height control based on silicon steel sheet thickness measuring with double eddy current sensors.
调整除尘器灰斗卸灰作业，防止粉尘堆积过高构成涡流磨损滤袋。
Adjust the precipitator hopper discharging operation, to prevent excessive dust accumulation form vortex wear bag.
试验结果表明铝蜂窝圆芯、金属橡胶圆环及涡流磁阻尼都可以用作月球着陆器的阻尼材料或阻尼方式使用。
The experimental results show that all the aluminum honeycomb core, metal rubber annulus and magnetic damping of eddy current can be used as damping materials or modes of the lunar lander.
通过对某电涡流位移传感器位移、电压用多项式拟合曲线的特点进行分析，经过试探发现该传感器曲线可转化为直线。
The curve of an eddy current displace sensor can be converted into a line by analysing the character of the curve obtained by polynomial fitting.
使用DASP数据采集与分析软件，对新型涡流磁阻尼月球着陆器原理模型的缓冲特性进行了试验测试。
Buffer characteristics of the principle models of the novel lunar lander with magnetic damping of eddy current were tested by means of the DASP software to collect and analyze data.
自制了涡流磁阻尼月球着陆器原理模型，对其缓冲性能进行了试验研究。
Experimental investigation are carried out for Buffer characteristics of homemade principle models of the lunar lander with magnetic damping of eddy current.
分析了电涡流缓速器的输出制动力矩在低、高速时的特性，提出了数学模型与神经网络模型切换点的选择方法。
The characteristics of eddy current retarder were analyzed at low and high velocity respectively. A selecting method for switch point between mathematical model and neural network was proposed.
特别是由于采用了涡流制动器调速系统，更加改善了运行机构的运行特性。
Particularly the use of eddy current speed control system improves performance of the mechanism.
本文对涡流混合器应用于干法变性淀粉加工工艺中混合操作进行了一系列研究。
This paper is the research of turbine technology in mixing unit in modified starch dry technics.
从而可以大幅度降低电涡流缓行器的容量，压缩成本和使用费用，同时相应地降低电瓶容量和车辆整备质量。
The capacity of electrical eddy current rail broke can be largely reduced. So can costs, capacity of storage battery and full mass.
本文着重对电涡流位移传感器的温度补偿系统及其补偿手段进行分析研究。
In this paper, we emphasize on the temperature compensation system and its means of Electric Eddy Transducer.
提出利用联合制动系统将电涡流缓速器应用到铰接车辆上的方法。
An associated braking system is proposed as a way of applying eddy retarder to articulated vehicles.
以涡流管组成的除尘器适应不同规模的燃煤锅炉及工业窑炉。
Vortex tube dust remover can apply in different size boiler and furnace to burn coal.
在后方，一个碳纤维的鲨鱼的牙齿的后方能降低空气涡流发生器的电梯。
At the rear, a carbon fibre 'sharks tooth' rear vortex generator helps to reduce aerodynamic lift.
介绍新型涡流传感器的设计原理、方法及应用。
Design principle and method of new type vortex sensor are introduced in this paper.
本文研究涡流发生器控制超临界翼型和翼身组合体机翼的附面层分离问题。
The paper investigates the problem on vortex generator control boundary layer's separation of supercritical airfoil and wing for body configuration wing.
本文的研究将为解决电涡流缓速器能量浪费问题带来一个较为可行的方法。
The research of this paper will bring a feasible method to solve the problem of energy waste on the eddy current retarder.
本文介绍了一种新型的凹型面埋入式涡流发生器的工作机理。
The paper presents the principle of boundary layer control for submerged vortex generators of concave shape.
适宜采用微型涡流发生器对超临界翼型边界层分离进行控制，其最佳位置应在分离线前2~5H涡流发生器高度之间。
The experimental results also show that the optimum effective position range was found to be 2H to 5H of micro vortex generator height upstream of baseline separation.
给出了高温型电涡流间隙传感器的设计方法和产品生产工艺。
The design method and the prodution technology of the high temperature electric vortex leakage sensor is proposed.
小外径的电涡流传感器薄线圈的参数优化设计的关键是寻求合理的目标函数的表达式。
The key of the optimization design of a small eddy current sensor coil is to find out the reasonable expression of the optimization destination function.
小外径的电涡流传感器薄线圈的参数优化设计的关键是寻求合理的目标函数的表达式。
The key of the optimization design of a small eddy current sensor coil is to find out the reasonable expression of the optimization destination function.
应用推荐