大多数现代商用系统都包括压力、温度和质量流率。
Most of today's commercially deployed systems include pressure, temperature and mass flowrate.
目的探讨唾液总流率的临床意义。
Objective To investigate clinical value of total saliva flow rates.
目的：探讨尿流率的临床诊断价值。
在每一区内，气含率都随液体流率的增加而增加。
In every region, the gas hold-up increases with the liquid rate.
同时得到了上游占有率与流率组合的最优输入特征。
In addition, the optimal input characteristic combined by occupancy and flow rate in upstream is received.
服务流率?。
对无因次返混流率与操作参数和几何参数进行了关联。
Finally the dimensionless backmixing rate is correlated with the operating parameters and geometric parameters.
塔内温度、流率、浓度分布受原料气组成的影响较大。
The distribution of temperature, flow, and concentration were significantly influenced by the composition of gas feed.
根据实验数据，推导出了“回落液幕无量纲体积流率公式”。
On the basis of the experimental data, derived was the "non-dimensional volume-flow rate formula of a falling-back liquid curtain".
两组间血钠浓度、尿流率、尿钠量、钠清除率的差异均无显著性。
There was no difference in serum Na concentration. urine flow amount, urine sodium content and sodium clearance between the two groups.
在四段实验设备内测定了停留时间分布，并估算出段间返混流率。
The RTD measured in a four—stage experimental equipment, and the backmixing rate is estimated.
型发电机组，应用于高产量工业，要求高流量和流率的应用领域。
L-shaped power units are ideal for demanding high-production industrial applications requiring high fluid volume and flow rate.
在相同的空气质量流率下，压降随着固体质量流率的上升而上升。
When keep the same, pressure drop increase with the increase of .
实验还表明，在溶液流率的一定范围内，晶体生长速率与流率无关。
It was also found that, in a certain range of flow rate of solution, the growth rate of crystals was independent of the flow rate.
湿地项目可以缓和雨洪峰值流率及降水过程中的径流排放量和沉淀量。
Wetland design can moderate peak flow rate and volume of runoff discharge and sediment deposition during precipitation events.
对稀相区在较高固粒流率下对颗粒运动速度进行了变工况分析和讨论。
Under the high solid flux, in the dilute flow region, the particle velocity is analyzed and discussed with the variation of operating condition.
慢流率导致较高的平均具温度，但创造不可取的温度梯度沿水流路径。
Slower flow rates result in higher average mold temperatures, but create undesirable temperature gradients along the water flow paths.
文中简介了催化剂、反应机理，以及反应温度和进料流率对反应的影响。
The catalysts, mechanisms, effects of reaction temperature and reactant flow rate on the reaction were also described.
比较各组动物颌下腺形态学改变，每周饮水量、静态唾液总流率的变化。
Morphological changes of submandibular gland, water intake and static total saliva flow rate of each group were observed.
后者是最近的另一个澳大利亚发明提供了非常缓慢流率令人惊讶的表现。
This latter is another recent Australian invention and provides surprising performance at very slow flow-rates.
通过测量表面速度和流层厚度，初步分析了流率及壁面状况对流动的影响。
Surface velocities as well as flow thickness were evaluated by means of tracer particles by which the influence of the flow rate and wall-wear was analyzed in experiment.
焊接工艺评定记录单上应包括封底焊时所用的惰性保护气体组成成分和流率。
The PQR shall include the composition and flow rate of the shielding and inert gas backing, when used.
采用人工神经网络方法预测了受模口温度和挤出流率影响的型坯成型阶段的膨胀。
Neural network method was used to investigate the parison swell affected by the die temperature and extrusion flow rate.
着重讨论分层结构中的流率控制层，论述了前人给出的求解原问题的一些工程近似想法。
The flow rate control level is focused and the simple engineering approximation of the original problem proposed by other scholars is discussed.
本文主要对双螺杆磨浆机的动力学参数(流率、功耗、螺杆扭矩和轴向力)进行了研究。
The paper focuses on the study of dynamics parameters that include flow rate, power consumption, torque and axis force of twin screw pulping extruder.
目的：分析低流率注射条件下最大斜率法测量的准确性，寻找提高其准确性的改良方法。
Objective: to analyse the accuracy of maximum-slope method in the condition of low injection rate and to find out an efficient way to improve its accuracy.
计算表明，无限导流水平井压力动态早期受流率分布变化影响，并不出现井筒径向流特征。
The results indicate that infinite-conductivity horizontal well transient pressure is influenced by variable flux, but it doesn't appear early well-bore radial flow characteristic.
目的：研究反复熔铸对非贵金属烤瓷合金铸流率、化学成分、微观组织结构的变化的影响。
Objective: To investigate the effects of recasting on the castability, composition and microstructure of non-precious ceramic alloy.
流率基本入树建模法不仅实现了规范化建模，而且有利于反馈环的计算和反馈性分析清晰化。
SD rate variable fundamental in-tree modeling not only realizes standardization of modeling but also is beneficial to calculation of feedback loops and perspicuity of feedback analysis.
依据两相流理论，分析了分液器安装角度、流型、液相表观质量流率与流量偏差之间的关系。
The relation between mass flow deviation and setting Angle, flow pattern, liquid apparent mass flow rate is analyze based on the theory of two-phase flow.
应用推荐