重现工作加上了对流体动力的分析模型和这类蛇体所使得力量的模型。
The reconstructions were coupled with an analytical model of gliding dynamics and the forces acting on the snakes' bodies.
格纳纳德西肯在新泽西州普林斯顿美国地球物理流体动力学实验室工作。他表示:“我们的小组开发气候模型。”
"Our group develops climate models," said Gnanadesikan, of the U.S. Geophysical Fluid Dynamics Laboratory in Princeton New Jersey.
基于流体动力学方程的行车时间估计模型不能很好地反映真实的行车时间,需要对其进行一定的改进。
The travel time estimation model based on the dynamic fluid equation can not reflect the actual travel time well, which needs to make certain improvement.
利用计算流体动力学(CFD)软件,建立了催化转化器流场的二维模型,对催化转化器的稳态流动进行了数值模拟。
A two-dimension model for the flow field in catalytic converter was established, and the steady state flow was simulated with the computational fluid dynamics (CFD) code.
流体动力学模型在揭示非线性现象和交通流宏观特性方面有着独特的优势。
The fluid mechanics model has special advantages in disclosing nonlinear phenomena and macroscopic characteristics of traffic flow.
推导了一种自旋固体火箭的流体动力学模型,并通过实例对模型进行了验证计算,计算结果与实际情况基本吻合。
The paper deduced the Fluid dynamics model of Spinning solid propellant rockets, and validated the Fluid dynamics model by analyzing the examples, the result accord with the actual status.
本文利用流体动力学模型,得到球对称装药爆破近区的自模拟解。
By applying the hydraulic model, the self-simulation solution of the spherical charge blasting at the close zone has been obtained.
该文通过对带铝套管的分段弹侵彻半无限钢靶的研究分析,以流体动力学和侵彻力学为基础,提出了一个分段弹垂直侵彻半无限厚靶的简化模型。
In study of the penetration of a segmented rod with aluminum carrier tube into semi infinite steel target, we present a simplified model of based on hydrodynamics and penetrating mechanics.
从探讨丙烯聚合工艺中环管反应器流体动力学模型着手,介绍环管反应器循环泵功率的计算方法。
A fluid dynamical model of the materials in a loop reactor for polypropylene production is suggested and the power of the circulating pump of the reactor is calculated by means of Newitt correlation.
利用流体动力学理论和动力有限元方法,对一受爆震波作用下的离心机模型试验结果进行了数值模拟与比较,并给出了几种典型屏障物对爆炸防护的影响。
The experimental results of a blasting centrifuge model test are numerically modeled and compared by using the fluid dynamic mechanics theory and dynamic finite element method.
采用计算流体动力学(CFD)模型预测某600MW电厂选择性催化还原法烟气脱硝系统不同设计情况下的流场状态。
The computation fluid dynamics(CFD) is used to predict the flow filed inside the selective catalytic reduction(SCR)system of a 600MW power plant.
运用计算流体动力学(CFD)的动网格技术对管道中的阀门关闭进行了动态模拟,针对同一模型,并与特征线法及试验进行了比较。
By using the dynamic mesh model in CFD software to calculate the pipe valve closing, use the characteristic method and the experiment to compare with the same model.
综合评述了守恒型差分格式及保真模型的研究进展,评价了守恒型差分格式及保真模型在地球流体动力学数值模拟中的作用。
The research of conservation difference schemes and high fidelity model design is recounted and the related remark about the GFD numerical model approaching is presented in this paper.
根据流体动力学理论分析了颗粒径与流化速度的关系,通过利用或建立简单的传热与燃烧模型,定量计算了不同粒径无烟煤颗粒的燃尽时间和一次通过炉膛时的停留时间。
With using some simplified heat-transfer & combustion model, the burn-out time and the stay-time(one times through furnace) of a single coal particle in the furnace of CFB were also calculated.
以水为流体介质,建立了旋流喷嘴的计算流体动力学模型。
The computational fluid dynamics model of a swirl nozzle is established with the water as the working fluid of atomization.
在本模型框架下,我们推导了二阶布拉格散射的表达式,并根据弱流体动力作用理论推导出流体动力调制函数解析表达式。
Within this frame, we derived a second-order Bragg scattering expression, and developed an analytic solution of hydrodynamic modulation function according to weak hydrodynamic interaction theory.
以离子与电子的双流体模型以及麦克斯韦方程为基础,推导得到了真空电弧的二维磁流体动力学(MHD)模型。
Based on two-fluid model of ion and electron and Maxwell equation, the two-dimensional magnetohydrodynamic (MHD) model of vacuum arc was obtained.
研究了一维粘性定态量子流体动力学(QHD)模型。
The viscous steady-state quantum hydrodynamic(QHD) model is analyzed.
利用“流体动力学”模型分析了超短脉冲激光与团簇的相互作用机制。
The interaction of atomic clusters with high intensity lasers has been investigated based on the hydrodynamic model developed by Ditmire et al .
从二维浅水非恒定流的控制方程出发,建立了一个二维湖泊流体动力学模型。
Based on the two-dimension adlittoral non-invariablenes flow control equation of lakes, a hydrodynamic model of lakes was built up.
在所有描述半导体的数学模型中,流体动力学模型和漂移扩散模型是应用最广泛的模型。
The hydrodynamic and the drift-diffusion models are the most widely used models to describe semiconductor devices today.
磨削区冷却液的热对流系数已由流体动力学和传热学模型估算得到。
The convection heat transfer coefficient of coolant within the grinding zone has been estimated using hydrodynamic and thermal modeling.
把星云的复杂的磁流体动力学方程,近似简化为只与速度相关的方程,则得到一个可解的简单模型。
The theory is based on the complex hydromagnetic equations of nebula, which are simplified approximately to the equations of velocity.
在建立的喷口电弧二维磁流体动力学数学模型的基础上,开发了SF_6断路器的CAD软件。
Based on two dimensional MHD mathematical model of nozzle arc, a CAD program is developed for SF6 circuit breaker design.
运用流体动力学理论知识,结合试验,建立了环缝磨内介质球的运动模型;
Using the knowledge of the hydrokinetics theory and combining experimentation, created the modal of the medium-balls' movement in Annular Gap Affritor.
长期以来,燃烧炉多是依靠传统经验模型进行设计,未充分考虑反应动力学及流体动力学对炉内燃烧场的影响。
Over the years, the design methods of burner rely on traditional empirical model, which did not fully add the effect of reaction kinetics and fluid dynamics to the combustion field.
主要讨论了亚微米半导体器件模拟的流体动力学模型方程的建立过程。
This paper presents the building procedures of hydrodynamic model for submicron semiconductor device simulation.
建立的喷口电弧磁流体动力学(MHD)数学模型,揭示了喷口电弧、热边界区、外部气流场的组成结构。
The structure of nozzle arc, thermal boundary region and gas flow is revealed through establishing magnetohydrodynamics (MHD) model.
在模拟气流分布板时,利用计算流体动力学软件中的多孔介质模型是一种有效的方法。
Used porous medium porous Jump Boundary Conditions of hydrodynamics in simulating the gas distribution screen.
在恒星结构和演化模型中,磁流体动力学过程作为一个非理想效应并没有被考虑。
As a non-ideal effect, magnetohydrodynamics is not considered in the stellar structure and evolution.
应用推荐