首要由叶轮、泵体以及泵盖构成。
Mainly by the impellers, pump body and pump cover composition.
泵盖保证运转时噪音处于最低水平。
The cover of the pump guarantees a minimum noise level during operation.
单柱电梯使用55加仑装泵盖单位。
Single Post elevator used with 55 gallon cover mounted pump units.
拆下高压泵盖。
安全阀可以与泵体或泵盖铸成一体，也可以单独装配。
The relief valve can be cast and pump body and pump cover, also can separate assembly.
安全阀可以与泵体或泵盖铸成一体，也可以单独装配。
Safety valve can be covered with the body or pump Zhucheng one, can also be a separate assembly.
主要由泵体、泵盖、叶轮、轴、轴套和支承部分构成。
The main parts of pump are pump casing, pump cover, impeller, shaft, shaft sleeve and supporting parts.
泵盖中设有冷却冲洗液循环回路，在泵盖上装有分配环。
The pump cover is provided with a cooling wash fluid circular loop inside. The pump cover is provided with a distributing ring.
并选用以上正交试验的工艺参数，对泵盖进行实际压铸生产。
Under the condition of orthogonal experiment process parameters, we actually produced Die Casting pump cover .
该泵为两级结构：泵盖与外隔板间装有离心工作轮——第一级；
This pump is two-stage structure: with the pump cover with centrifugal work between clapboard wheel - the first level;
PWF主要由泵盖、泵壳、叶轮、轴封、轴、和托架等零部件组成。
PW, PWF mainly by the pump cover, pump casing, impeller, shaft seal, shaft, and bracket the composition of such components.
泵体和泵盖构成泵的工作室，泵体的入口为水平方向，出口垂直向上。
The pump body and pump cover composes the pump studio. The inlet of the pump body is horizontally while the outlet is straight-up.
它包括转轴、泵体、泵盖，两个叶轮背靠背地安装在一起，构成双吸叶轮；
The double attraction centrifugal pump consists of rotation shaft, pump body, pump cover, and double attraction vane wheel comprising two back-to-back installed vane wheels.
泵主要由泵体、泵盖、叶轮、轴、密封环、轴套、轴承、轴封等零件组成。
The main parts of pump are pump casing, pump cover, impeller, shaft, sealing ring, shaft sleeve, bearing and shaft seal etc.
泵主要由泵体、泵盖、叶轮、轴、密封环、中间支架、密封和悬架部件等组成。
The pump comprises mainly of pump body, cover, impeller, shaft, seal ring, intermediate support, sealing and suspension assembly, etc.
泵主要由泵体、泵盖、叶轮、轴、密封环、中间支架、密封和悬架部件等组成。
The main parts include pump body, pump cover, impeller, axis, sealing rings, intermediate support, sealing and suspension parts and other components.
因此选择泵的安装位置时，要使泵盖和轴承座的热量便于扩散，不出现任何蓄热现象。
Therefore, when selecting the installation position of the pump, the heat quantity of the pump cover and the bearing seat is easy to spread, and no heat accumulation phenomenon occurs.
导热油泵首要由泵体、泵盖、轴承体、支架、主轴、密封、轴承、叶轮八个年夜的零部件组成。
Conducting oil pump prime the pump, pump cover, bearing, bracket, shaft, seals, bearings, impeller of eight large component parts.
发动机配件类：齿轮室、气门室罩盖、链轮室罩盖、预热器座、水泵泵盖、进气歧管、泵箱；
Engine fittings series:Gear chamber, Cavaera cover, Sprocket rooms cover, Preheaterbase, Water pump Cover, Intake manifold, Pump box.
在泵轴的下端，泵盖及泵体形成的内腔中设置有叶轮，叶轮上设有背叶片，并由锁紧螺钉紧固；
The impeller is arranged in an inner cavity formed by a pump cover and a pump body at the lower end of the pump shaft, and back blades are arranged on the impeller and are fastened by locking bolts;
主要有齿轮、轴、泵体、泵盖、轴承套、轴端密封等组成。齿轮采用双圆弧正弦曲线齿形制造。
YCB arc gear pumps are mainly gear, KCG axis, the pump body, cover, the axial bearing, sealing etc. Using double circular-arc gear tooth sine curve.
其特征将离心泵分解成由泵盖及整体蜗壳组合结构，并在过流部位衬里一层浇注型聚氨酯弹性体。
The centrifugal pump is one combined structure of pump cover and integral volute and has one cast polyurethane elastomer lining in the fluid passing part.
齿轮泵的磨损部位主要有主动轴与衬套、被动齿轮中心孔与轴销、泵壳内腔与齿轮、齿轮端面与泵盖等。
Pump wear parts are mainly drive shaft and bushing, passive gear center hole and shaft pin, pump shell lumen and gear, gear face and pump cover, etc.
本发明较已有技术衬里简单，节省能源，生产效率高，而且不会损坏泵壳，耐磨性能好，前后泵盖可单独更换，可降低用户维修成本。
The lining is easy to form, high in production efficiency, no damage to volute, and high in wear resistance. The pump has replaceable front and back pump cover for lowering maintenance cost.
泵体、泵盖的材质采用铸钢ZG230-450的较多，也可以采用球墨铸铁材质，两种材质对比后者的耐磨性和硬度以及耐温性要因为前者。
Pump cover material with steel ZG230-450 more, can also be used ductile iron, the latter two materials contrast of wear resistance and hardness and heat resistance to be because the former.
根据泵承受的最大压力，泵体和泵盖材质采用灰口铸铁(1.6Mpa)、球墨铸铁(2.0 mpa)、铸钢(2.5 Mpa，包括不锈钢)。
According to the maximum pressure to bear, pump body and cover can be made of grey cast iron (1.6mpa), spheroidal graphite cast iron (2.0mpa) or cast steel (2.5mpa, including stainless steel).
内啮合齿轮泵的结构和其他齿轮泵结构类似，主要由外转子、转子、泵轴、泵体、前盖、托架、密封装置、轴承等组成。
Internal gear pump structure and other gear pump structure similar to, mainly by the outer rotor and rotor, pump shaft, pump body, the front cover, bracket, sealing device, bearing, etc.
其他服务有为客户组织和提供玻璃瓶相关配套产品和信息，如塑料盖、电化铝盖、喷头、压泵、各种包装等。
We also offer the information about the accessories of glass bottles such as plastic caps, electrochemical aluminum covers, sprayers, press pumps, and all kinds of packages etc.
本文介绍油隔离泵阀箱渗漏的原因，能过对阀盖O型圈沟槽的改进及采取乐泰密封胶替代牛油盘根进行密封，解决了阀箱渗漏的问题。
This paper introduces the cause of the seepage in valve box of oil isolation pump, and solves the problem of the valve box seepage by way of the improvement of die slot in O - ring and seal material.
使用化疗泵方法：在无菌操作下，将氟尿嘧啶1500mg加入生理盐水至275mL，摇匀，药液注入泵内，拧紧帽盖装置。
The use of chemotherapy pump Methods: in aseptic operation, will join the saline fluorouracil 1500 mg to 275 mL, shake, liquid injection pump, the fastening device caps.
应用推荐