熟悉注塑工艺或模具结构设计。
Be familiar with injection molding process or mold structure design.
熟悉原材料选择,模具设计,注塑工艺。
Familiar with raw material selection, mold design, molding process.
坑形通过注塑工艺在聚碳酸脂盘面形成。
Pits are formed in the polycarbonate disk by an injection molding process.
熟悉注塑工艺,能分析解决常见产品问题;
Understanding of injection molding process and solving common problems; .
同时,注塑工艺条件对其力学性能也有一定影响。
At the same time, injection processing condition also influence on the mechanical properties.
CNC编程。模具制造注塑工艺等方面有丰富地经验。
CNC programming. Mold injection molding process and so has extensive experience.
可以达到对注塑工艺条件的优化,缩短生产时间,提高制件质量。
Achieve the optimization of the injection process conditions, shorten production time and improve part quality.
精密注塑模具与精密注塑工艺是精密注塑产品快速开发的关键技术。
Both of precise injection mould and precise injection molding are the key technologies in the process of rapid developing precise plastic parts.
注塑模具的温度控制对注塑工艺和注塑件的质量有非常重要的影响。
The control of mold temperature in injecting process has extraordinary important influences not only on the quality of the injected products but also on the process itself.
丰富的注塑工艺知识,熟悉设备参数设置;优秀的注塑问题解决能力。
Strong knowledge of scientific injection molding, machine parameters setting and excellent problem solving.
重点阐述了PP S制品的注塑工艺、后处理工艺以及超声波焊接工艺。
The injection molding technique, after-treating technique and ultrasonic welding technique of PPS products are described in detail.
研究了一种利用蒸汽加热和冷却水冷却的变模温注塑工艺,制定了其工艺流程。
A variotherm injection molding technique with steam heating and coolant cooling was studied and its molding process was also designed.
注塑工艺中多型腔非平衡浇注系统的平衡状况,在很大程度上影响制品的质量。
The balance of the multicavity unbalancing injection system has great influence on the quality of the parts.
本文以知识工程和CAE模拟分析技术为理论基础,进行了车灯注塑工艺优化的研究。
The optimization approach of the lamp injection moulding technics is studied based on the KBE (Knowledge Based Engineering) and CAE (Computer Aided Engineering) technology.
液体直接注塑工艺中,尤其是树脂传递模塑工艺在汽车业中的应用,已被证实相当成功。
Liquid direct processing, and RTM in particular, has been proven extremely successful in the automotive industry.
通过对滴灌灌水器产品结构的分析,确定合理的注塑工艺参数,制得各项性能均良好的滴灌灌水器产品。
Analyze the structure of the drip-emitter, get the best parameters of the injection molding, obtain the parts with good quality.
因此,建立基于知识和经验的注塑制品缺陷诊断和工艺优化专家系统对辅助注塑工艺设置具有重要意义。
So it is significant to design and develop an expert system for part flaws diagnosis and process variables optimization of injection molding based on knowledge and experience.
因此对塑件的翘曲变形进行分析并对其注塑工艺参数进行优化,是提高生产质量的一个非常有效的措施。
Therefore, analyzing the warpage of the plastic parts and optimizing their process parameters, is a very effective measure to improve the production quality.
在拥有强大金属冲压件研发实力的基础上,相信未来我们的嵌入式注塑工艺也一定会取得良好的市场业绩。
On the basis of metal stamping parts R & D, We believe that the future of our embedded insert molding technology will obtain the good market performance.
传统的注塑模CAE分析可以事先发现注塑成型中的潜在问题,如翘曲等,但是不能实现注塑工艺参数优化。
The traditional CAE analysis of plastic injection molding can only reveal potential problems in plastic injection, such as warp, but it does not optimize the process parameters.
咖啡壶手柄,由于存在非常大的壁厚差异,且结构形状相当复杂,采用普通注塑工艺难以成型,必须采用气辅注射成型工艺。
Because great thick differences exist on wall of handle of coffee pot and the structure is quite complicated, it is very difficult to produce with ordinary plastics injection process.
介绍了结构发泡的工艺过程,并将该工艺与普通注塑工艺作了比较,阐述了结构发泡成型技术的优点及装置的关键技术和产品特点。
The process of structural foam molding was introduced, and compared with the process of ordinary injection molding. The technical features and key techniques of the equipment were described.
结果显示由于引线键合工艺、注塑工艺以及回流焊中封装体各部分不同的热膨胀系数引起的热应力和塑性变形是产生引脚跟断裂的主要因素。
The result shows that the plastic strain at the heel region induced by wire bonding process, molding process and the thermal stress and strain in solder reflow are the main causes of heel crack.
采用粉末浸渍的方法制备连续玻璃纤维增强聚丙烯预浸料,经切割获得长纤维增强聚丙烯粒子,探索了材料的注塑工艺,研究了注塑后材料的力学性能及其影响因素。
The pre-impregnation compound of continuous glass fiber reinforced PP was prepared by using powder impregnation process and cut into the long fiber reinforced PP particles.
制定、执行和优化注塑成型工艺。
注塑成型工艺是开发塑料进气歧管的重要环节。
The injection molding is an important tache to exploit plastic air intake manifold.
低模量高性能热塑性弹性体的食物遵守特异性。它适用于挤出和注塑成型工艺。
A low modulus high performance thermoplastic elastomer with food compliance specificity. It is suitable for extrusion and injection molding processes.
然而,塑料材料的自有特性和复杂的工艺条件致使注塑成型过程相当复杂。
However, the property of plastic material itself and the complexity of processing conditions make the process of the injection molding quite complicated.
然而,塑料材料的自有特性和复杂的工艺条件致使注塑成型过程相当复杂。
However, the property of plastic material itself and the complexity of processing conditions make the process of the injection molding quite complicated.
应用推荐